Determination of phenolic whitening agents in cosmetics by micellar electrokinetic capillary chromatography with amperometric detection

A sensitive method for simultaneous determination of six phenolic whitening agents,including arbutin, phenol,resorcinol,hydroquinone,kojic acid,and salicylic acid in cosmetics has been developed using micellar electrokinetic capillary chromatography with amperometric detection（MECC-AD）.Effects of several factors,such as the pH value and concentration of running buffer,potential applied to the working electrode,separation voltage,and injection time were investigated to obtain optimum conditions for separation and detection.With a 75 cm long fused-silica capillary tube,well-defined separation of six phenolic compounds was achieved in 10mmol/L SDS/40 mmol/L H₃BO₃-Na₂B₄O₇ running buffer（pH 9.0）.Good linear relationship was obtained for each analyte over three orders of magnitude with correlation coefficients（r2） between 0.9985 and 0.9994,and the detection limit（S/N=3） ranged from 0.04μg/mL to 0.45μg/mL The proposed method has been successfully applied for the determination of phenolic whitening agents in real cosmetic samples with satisfactory results,providing an alternative monitoring method for cosmetics safety regulation.     

Diarylheptanoids from the root bark of Juglans cathayensis

A new diarylheptanoid glucoside,（8R,9R）-17-methoxy-2-oxatricyclo[13.2.2.1^3.7]icosa-l（17）,3（20）,4,6, 15,18-hexaene-4,9,10-triol-9-O-β-D-glucopyranoside（1）,namely jugcathayenoside,together with two known diarylheptanoids,（+）-galeon（2） and 4-hydroxy-17-methoxy-2-oxatricyclo[13.2.2.1^3,7 ]icosa-1（17）,3（20）,4,6,15,18-hexaene-9-one（3）,were isolated from the root bark of Juglans cathayensis. Their structures were elucidated on the basis of extensive spectroscopic data analysis.     

Synthesis and molecular modeling study of Cu(Ⅱ) complexes derived from 2-(diphenylmethylene)hydrazinecarbothioamide derivatives with cholinesterase inhibitory activities

Thiosemicarbazones of 2-amino-5-chlorobenzophenone and 3-aminobenzophenone（L¹-L⁴） have been synthesized and their Cu（Ⅱ） complexes（1-4） were afforded via coordination with cupric chloride.All these compounds were characterized by UV-vis and IR spectroscopy together with CHN elemental analysis.NMR spectroscopy was also applied to characterize the ligands.In vitro chohnesterase inhibitory assays for the complexes（1-4） showed IC₅₀ values less than 10μmol/L,with complex 1 exhibiting the most activity,IC₅₀=2.15μmol/L and 2.16μmol/L for AChE and BuChE,respectively. Molecular modeling simulation revealed the binding interaction template for complex 1 with the AChE and BuChE receptors.In DPPH assay,the complexes also showed more in vitro antioxidant activities in comparison to their parent ligands.     

An efficient synthesis of 2-(guaiazulen-1-yl)furan derivatives via intramolecular Wittig reactions

An efficient and mild synthesis of 2-(guaiazulen-1-yl)furans,starting from easily accessible 1-(3-aryl-2-cyanopropenoyl) guaiazulenes,tributylphosphine and acyl chlorides,is described.The strategy employs the intramolecular Wittig protocol as a key step to append the crticial furan ring,leading to the highly functional furans in good yields.     

Solvent effects on oxygen atom transfer reaction between manganese(V)-oxo corrole and alkene

Pseudo-first order reaction rate constants of 5,10,15-tris（pentafluorophenyl）corrole Mn（V）-oxo (F₁₅CMn（V）-oxo),5,15-bis（pentafluorophenyl）-10-（phenyl）corrole Mn（V）-oxo(F₁₀CMn（V）-oxo),5,15- bis（phenyl）-10-（pentafluorophenyl）corrole Mn（V）-oxo（F₅CMn（V）-oxo） and 5,10,15-tris（phenyl）corrole Mn（V）-oxo（F₀CMn（V）-oxo） with a series of alkene substrates in different solvents were determined by UV-vis spectroscopy.The results indicated that the oxygen atom transfer pathway between Mn（V）-oxo corrole and alkene is solvent-dependent.     

Higher alcohol synthesis over Cu-Fe composite oxides with high selectivity to C2+OH

Cu-Fe composite oxides were prepared by co-precipitation method and tested for higher alcohol synthesis from syngas. The selectivity to C2+OH and C6+OH in alcohol distribution was very high while the methane product fraction in hydrocarbon distribution was rather low, demonstrating a promising potential in higher alcohols synthesis from syngas. The distribution of alcohols and hydrocarbons approximately obeyed Anderson-Schulz-Flory distribution with similar chain growth probability, indicating alcohols and hydrocarbons derived from the same intermediates. The effects of Cu/Fe molar ratio, reaction temperature and gas hourly space velocity (GHSV) on catalytic performance were studied in detail. The sample with a Cu/Fe molar ratio of 10/1 exhibited the best catalytic performance. Higher reaction temperature accelerated water-gas-shift reaction and led to lower total alcohols selectivity. GHSV showed great effect on catalytic performance and higher GHSV increased the total alcohol selectivity, indicating there existed visible dehydration reaction of alcohol into hydrocarbon.     

硫酸酯化川芎粗多糖的半合成及其抗氧化活性

以水提醇沉法制备川芎粗多糖(1)。首次报道了1与氯磺酸-吡啶经亲核取代反应半合成硫酸酯化川芎粗多糖(2)的方法,其结构经UV和IR表征。用氯化钡-明胶比浊法测定2的取代度。考察了1和2对邻苯三酚自氧化反应产生的超氧阴离子(O2-·)和1,1-二苯基-2-苦基肼(DPPH)体外清除自由基能力。结果表明:在测定浓度范围内,1和2对O2-·清除能力极弱,但对DPPH自由基有一定的清除作用。     

Preparation of Silver Nanoparticles‐Based Sensors for the Electrochemical Detection of Thiourea in Leaching Solutions of Waste Electrical and Electronic Equipment

Waste of electrical and electronic equipment is an interesting secondary resource of base and precious metals. Particularly the use of thiourea‐leaching in acidic medium was proposed for noble metals recovery. In this work, a novel and easy‐to‐use electrochemical sensor was developed, aimed to test thiourea from leaching solutions containing significant thiourea and copper amounts. The sensor was constructed using silver nanoparticles (AgNPs) deposited on screen‐printed electrodes. Its performance was studied in a synthetic leaching solution; changes in the overall surface charge of AgNPs resulting in changes in the charge‐transfer resistance for the copper ions were evaluated by electrochemical impedance spectroscopy.     

Electrochemical Characterization of Egyptian Blue Pigment in Wall Paintings Using the Voltammetry of Microparticles Methodology

The solid state voltammetric response of Egypt blue, Han blue and ploss blue pigments upon attachment to graphite electrodes in contact with aqueous phosphate buffer at pH 7.0 is studied by voltammetry of microparticles and scanning electrochemical microscopy. Such voltammetric responses, combined with those for synthetic specimens consisting of binary mixtures of the pigment and SiO₂ or CaCO₃ as well as ternary ones of CaCO₃ and SiO₂ mixtures allow for the identification of the pigment and the support in samples from wall paintings using different electrochemical parameters, in particular upon performing the Tafel and modified Tafel analysis of voltammetric peaks. Identification of Egypt blue in microsamples of murals from a Roman archaeological site in Castulo (Jaén, Spain) is discussed.     

Isolation and determination of estrogens in water samples by solid‐phase extraction using molecularly imprinted polymers and HPLC

Advanced SPE with molecularly imprinted polymers (MIP) was used in this study. A noncovalent imprinting approach was applied to separate 17β‐estradiol, estriol, and estrone from water samples. Polymer material was prepared by bulk polymerization with methacrylic acid as a functional monomer, divinylbenzene and ethyleneglycol dimethacrylate as crosslinkers, and acetonitrile, acetonitrile/toluene (3:1, v/v) or isooctane/toluene (1:99, v/v) as a porogen. We also prepared an MIP film on a silica gel surface with methacrylic acid and ethyleneglycol dimethacrylate as monomers and acetonitrile as a solvent. Qualitative and quantitative hormone analyses were carried out by HPLC with various detection techniques, including UV/visible spectroscopic detection (diode array detection) and electrochemical detection (CoulArray). The results of the study indicate that MIP technology is an excellent method for the quality control of estrogens in environmental analyses with a low quantification limit for 17β‐estradiol of around 26 (diode array detection) and 0.25 ng/mL (electrochemical detection). The proposed method was found to be suitable for routine determinations of the analyzed compound in environmental laboratories.