纳米氧化钛-乙二醇溶胶溶液的研究

选用了钛酸丁酯、硬脂酸和乙二醇作为表面活性剂，采用表面化学修饰和表面物理修饰2种方法修饰纳米氧化钛，然后分散在乙二醇溶剂中形成溶胶溶液．并通过红外光谱仪、紫外分光计、原子力显微镜，分析了表面化学修饰后的纳米氧化钛表面化学结构的变化，观测了纳米氧化钛溶胶在乙二醇溶剂中稳定性．试验结果表明表面活性剂与纳米氧化钛的表面的不饱和键之间形成了新的化学结构，粒子表面可能接枝上有机长链，提高了纳米粒子在溶剂中的相容性．表面化学修饰后的纳米氧化钛与乙二醇溶剂形成了较稳定的溶胶体系，而且纳米溶胶粒径较小．表面活性剂添加量与纳米粒子添加量控制在(1～1．2)：1时，可以获得纳米溶胶粒径较小，同时溶胶稳定性较好的纳米氧化钛-乙二醇溶胶体系．     

偶联分子对金纳米粒子在玻片上组装的影响

将金纳米粒子组装在用3-氨基丙基-三乙氧基硅烷(APES)修饰的普通玻片上,再分别用偶联分子对巯基苯胺、1,4-二巯基苯在该基底上再次组装金纳米粒子,结果表明用对巯基苯胺作为组装的偶联分子得到双层金纳米粒子结构,对巯基苯胺的表面增强拉曼光谱信号得到增强,而用1,4-二巯基苯作为组装的偶联分子得到单层金纳米粒子结构。     

Atomic-scale simulation of nano-grains:structure and diffusion properties

Nanograins are characterized by a typical grain size from lto 100 nm.Mclecular dynamics aimubations have been carried out for the nanograin sphere with the diameters from 1.45 to 10.12 nm.We study the influence of grain size on structure and diffusion properties of the nanograins.The results reveal that as the grain size is reduced,the fraction of grain surface increases significantly,and the surface width is approximately constant；the diffusicn coefficlent is increased sharply,and the relation of the diffusion coefficient and the grain size is close to exponential relation below 10nm.     

Control of LHCD on the HL-2A Tokamak

in order to study non-indutive plasma current production, the lower hybrid current drive（LHCD） experiment on the HL-2A tokamak is carried out. Simultaneously a microcomputer has been used to control the whole LHCD system. During the experiment this year, we can monitor and protect the LHCD system by use of the microcomputer control system, which will imediately switch off the microwave power to be launched into the tokamak if the plasma is disrupted. All this ensure that the microwave is injected into the equipment correctly.     

纳米Zr-V-O粉末的XRD及TG-DSC研究

利用机械合金化制备纳米Zr-V粉末，对制备过程的材料进行物相分析和热分析试验。初始粉末Zr（150μm）和V（150μm）元素粉末（纯度99．15％）按原子比1：2或1：1进行混合后在氩气气氛中放入SimoloyerCMol—2球磨仓中，按几种不同的试验条件进行球磨。同时在997K和1047K下热处理40min和1h，并对热处理前后的粉末进行了物相和TG-DSC实验分析。     

Raman properties embeddedof GaSb nanoparticlesin SiO2 films

The Raman shifts of nanocrystalline GaSb excited by an Ar^ ion laser at wavelengths 514.5, 496.5, 488.0, 476.5,and 457.9nm are studied by an SPEX-1403 laser Raman spectrometer respectively, and they are explained by phonon confinement, tensile stress, resonant Raman scattering and quantum size effects. The Stokes and anti-Stokes Raman spectra of GaSb nanocrystals strongly support the Raman feature of GaSb nanocrystals. The calculated optical spectra compare well with experimental data on Raman scattering GaSb nanocrystals.     

3,7-二硝基亚氨基-2,4-二氮杂双环[3,3,0]辛烷的放热分解反应动力学

在程序升温条件下 ,用DSC研究了标题化合物的放热分解反应动力学 .用线性最小二乘法、迭代法以及二分法与最小二乘法相结合的方法 ,以积分方程、微分方程和放热速率方程拟合DSC数据 .在逻辑选择建立了微分和积分机理函数的最可几一般表达式后 ,用放热速率方程得到相应的表观活化能 (Ea)、指前因子 (A)和反应级数 (n)的值 .结果表明 :该反应的微分形式的经验动力学模式函数、Ea 和A值分别为 (1-α) 0 .44、2 30 .4kJ/mol和 10 18.16s-1.借助加热速率和所得动力学参数值 ,提出了标题化合物放热分解反应的动力学方程 .该化合物的热爆炸临界温度为 30 2 .6℃ .上述动力学参数对分析、评价标题化合物的稳定性和热变化规律十分有用 .     

2-乙酰氨基-3,4,6-三乙酰葡萄糖的合成

细菌内毒素(ＬＰＳ)是革兰氏阳性阴性菌细胞外膜层的主要成分,由其引起的革兰氏阴性杆菌脓度症和休克是导致战创伤病人死亡的主要原因之一。而从类脂Ａ(ＬｉｐｉｄＡ)的结构出发,以非肽类物质拮抗内毒素受体ＣＤ-14为治疗手段的研究在国外刚刚起步。2-乙酰氨基-3,4,6-三乙酰葡萄糖是合成ＬｉｐｉｄＡ结构类似物的重要中间体[1,2]。它的合成一般是通过氨基葡萄糖五乙酸酯的选择性水解[3-6]脱去一个乙酰基得到。氨基葡萄糖五乙酸酯是通过氨基葡萄糖的乙酰化反应得到的,由于氨基葡萄糖不稳定,一般是用氨基葡萄糖的盐酸盐作为起始原料。由于…     

HL-2A装置硅化对杂质线辐射的影响

在2004年的实验中，首次在HL-2A偏滤器装置上进行了硅化器壁处理，在这种硅化器壁的条件下，对轻重杂质的线辐射进行了研究，并与无硅化条件下的杂质特性作了比较。在实验中，通过观测杂质的辐射特性研究了硅化对杂质的吸附作用和硅化效果的维持。并通过调整硅化后的辉光放电清洗，研究了硅化对氢再循环的影响。     

Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.