Electrospinning of nylon-6,6 solutions into nanofibers: Rheology and morphology relationships

The relationship between the rheological properties of nylon-6,6 solutions and the morphology of their electrospun nanofibers was established. The viscosity of nylon-6,6 in formic acid(90%) was measured in the concentration range of 5 wt%-25 wt% using a programmable viscometer. Electrospinning of nylon-6,6 solutions was carried out under controlled parameters. The chemical structure, morphology and thermal properties of the obtained nanofibers were investigated using Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM) and differential scanning calorimetry(DSC), respectively. Entanglement concentration(ce) was found to be 15 wt% and a power law relationship between specific viscosity and solution concentration was observed with exponents of 2.0 and 3.3 for semi-dilute unentangled(c ce) and semi-dilute entangled(c ce) regimes, respectively. The diameter and uniformity of the nanofibers were found to be dependent on the viscosity. Moreover, the average diameter of electrospun nanofibers was found to be dependent on zero shear rate viscosity and normalized concentration(c/ce) in a power law relationship with exponents of 0.298 and 0.816, respectively. For nylon-6,6 solutions, the entanglement concentration(ce = 15 wt%) provides the threshold viscosity required for the formation of a stable polymeric jet during electrospinning and producing uniform beadless fibers. For concentrations less than ce, beaded fibers with some irregularities are formed. DSC analysis showed an increase in crystallinity of all electrospun samples compared to original polymer. Furthermore, Based on FTIR spectroscopy, α phase is dominant in electrospun nanofibers and minor amount of β and γ phases is also available.     

Synthesis,characterization, thermal stability and antibacterial activity of coumarin based methacrylate copolymers

Monomer of 7-methacryloyloxy-4-methylcoumarin(MAOMC) was synthesized and characterized by FTIR, 1H-NMR and 13C-NMR spectroscopy. Copolymers of MAOMC with butoxyethylmethacrylate(BOEMA) at different feed compositions were prepared by free radical solution polymerization at(70 ± 1) °C in ethylmethylketone(EMK) using benzyl peroxide(BPO) as an initiator. The copolymers were characterized by FTIR and 1H-NMR spectroscopy. Thermogravimetric analysis(TGA) and differential scanning calorimetry(DSC) of the copolymers showed moderate thermal stability and higher Tg values. Gel permeation chromatography(GPC) was used to find out the molecular weights of the different copolymers. Antibacterial activities of the copolymers were also investigated against the selected pathogenic bacteria's. The antibacterial activity of the copolymer increases as the MAOMC content increases in the copolymer. This shows that coumarin moiety plays a very important role in the antibacterial activity.     

三维立方准晶椭球夹杂的Eshelby张量

准晶体颗粒复合智能材料具有优异的物化性能和应用前景。不同于传统的各向同性材料,三维立方准晶体材料包含声子场,相位子场,及声子-相位子耦合场。为更好地研究准晶体颗粒夹杂问题,揭示准晶体材料夹杂问题的物理现象,本文利用本征应变公式和柯西留数定理,考虑椭球体夹杂,获得了三维立方准晶材料夹杂问题的Eshelby张量,并给出了统一的表达式。进而,当三维立方准晶夹杂形状为球形、棒状、扁平状和带状时,获得了封闭形式的三维立方准晶Eshelby张量表达式。同时,给出了椭球体长径比变化时Eshelby张量的变化规律,这对研究准晶体颗粒夹杂问题具有重要的理论意义。     

基于涡量矩理论的绕振荡水翼涡动力学分析

文章采用标准k-ω SST湍流模型和动网格技术, 实现了绕俯仰振荡NACA66水翼非定常流动结构与水动力特性的数值模拟, 并基于有限域涡量矩理论定量表征了局部旋涡结构对水翼动力特性的影响. 研究结果表明: 在水翼升程阶段, 当攻角较小时, 层流向湍流的转捩点由水翼尾缘向前缘移动; 在较大攻角时, 顺时针尾缘涡?TEV在水翼吸力面上生成并向前缘发展, 同时与吸力面上的顺时针前缘涡?LEV融合发展为附着在整个吸力面上的新前缘涡?LEV, 新的?LEV与逆时针尾缘涡+TEV相互作用直至完全脱落, 直接导致了水翼的动力失速, 在回程阶段, 绕振荡水翼的流场结构逐渐由湍流转变为层流. 基于有限域涡量矩理论的定量分析发现, 有限域内附着的?LEV和?TEV提供正升力, 当?LEV发展覆盖整个吸力面时对升力的贡献最大, 占总升力近50%, 而+TEV提供负升力. 同时发现, 有限域内各旋涡内部的不同区域提供的升力有正有负; 而逸出有限域的旋涡内部不同区域提供的升力方向均保持一致, 其中顺时针涡提供正升力, 而逆时针涡提供负升力. 在失速阶段, 域外旋涡整体对升力贡献较小且存在小幅波动, 体现了流动的非定常性.      

任意边界条件下双模量矩形薄板的弯曲

将双模量板等效为两个各向同性小矩形板组成的层合板,假定该层合板的中性面即为两个小矩形板的交界面。根据中性面上应力为零且薄板全厚度上应力的代数和为零,推导了双模量矩形薄板的中性面位置。本文采用严宗达提出的带补充项的双重正弦傅里叶级数通解,该通解可以适用于任意边界条件的矩形薄板且不需要叠加或者重新构造。联立边界条件和控制方程,求得通解中的待定系数并代入到通解中,即可得到任意边界条件下双模量矩形薄板的弯曲解析解。与有限元结果比较,本文结果符合工程精度要求。     

粉末活性炭对模拟间苯二酚废水的吸附

在静态条件下,研究了粉末活性炭对间苯二酚废水的吸附效果,通过实验优化了吸附条件,并在最佳处理效果下探究其吸附模式。结果表明,当水样pH值为4,温度30℃,活性炭用量0.3g,振荡时间10m in,振荡速率为120r/m in时,对废水的处理效果最佳。拟合得到活性炭吸附间苯二酚的模式符合F reund lich吸附模式。     

魔芋总生物碱量的测定

用酸性染料比色法测定魔芋总生物碱量,以盐酸金刚烷胺计,在2—10μg/mL范围内线性关系良好。设计正交试验选择总生物碱的最佳提取条件为：料液比1：12,乙醇浓度85%,索氏提取4h。     

CS-800红外碳硫分析仪测定合金钢中的碳和硫

研究了碳硫分析在不同钨助熔剂加入量及不同分析时间的条件下所得碳、硫元素含量,首次结合分析曲线验证最佳条件,并对碳、硫分析可能存在的误差进行浅析.     

一类宏观经济学中的二阶离散方程的正解的有界性

利用Leray-Schauder延拓定理,使用对角化方法考虑了来源于宏观经济学中的一类二阶差分方程的有界性.     

基于统计过程控制技术的项目管理可视化控制系统

概述IMCS-SPC模型的总体框架、组成部分以及两大核心技术(多变量统计过程控制技术和虚拟现实可视化技术);详细讨论项目管理者构建IMCS-SPC模型的基本步骤。作为一种采用多元统计分析进行过程控制的可视化决策支持系统,IMCS-SPC为项目管理者提供了一种十分清晰、直观的过程控制方法和工具,可有效提高项目管理效率,以确保项目过程的正常运行。