YPO4/Eu3+微米束的尿素辅助水热合成及其发光性能

以Y( NO3)3、Eu( NO3)3和(NH4)2HPO4为原料,尿素作辅助剂,采用水热法成功制备出束状YPO4/Eu3+荧光粉.利用X射线粉末衍射仪、透射电镜、荧光光谱仪等研究了产物的晶体结构、形貌及发光特性;基于透射电镜分析探讨了YPO4/Eu3+微米束结构的形成机理.结果表明:YPO4/Eu3+属于四方晶系,空...     

CdS修饰玻碳电极电化学发光法检测三聚氰胺

本文将CdS纳米棒修饰到玻碳电极上制作了CdS修饰玻碳电极(CdS/GCE)并研究了其在K2S2O8溶液中的电化学发光(ECL)性能.基于三聚氰胺能淬灭CdSK2s2O8电化学发光的性质建立了一种检测三聚氰胺的方法.在最优条件下,体系的ECL强度与三聚氰胺浓度在1.0×10-9～1.0×10-7 mol/L范围内与EC...     

1D Lanthanide Coordination Polymers Based on 3-（Pyridin-4,yl）benzoic Acid： Syntheses, Structures and Luminescent Properties

Four novel 1D lanthanide coordination polymers with formula [Ln(3,4-pybz)3(H2O)2· H2O]n (Ln = 1 Sm; 2 Eu; 3 Tb; 4 Dy, 3,4-Hpybz = 3-(pyridin-4-yl)benzoic acid) have been synthesized by hydrothermal reactions of lanthanide oxide and 3-(pyridine-4-yl) benzoic acid. Single-crystal X-ray diffraction shows that the four compounds are isostructural. They all crystallize in a monoclinic system, space group P1. They have a doubly carboxylate-bridged infinite-chain structure with alternating Ln-(carboxylate)2-Ln linkages and one chelating carboxylate group on each metal center. The Ln ion also combines to two water molecules to form an eight-coordinate square antiprismatic geometry. The pyridine nitrogen atoms of the ligand do not coordinate to the metal centers but direct the formation of a 3D network through hydrogen bonding with coordinated water molecules. The photoluminescent properties of 2 and 3 have been also studied.     

A 2D Lanthanide-organic Framework Based on Inorganic Lanthanum（Ⅲ） Sulfate Skeletons：Synthesis,Structure,and Luminescence and Thermal Properties

A new lanthanum coordination polymer formulated as {[La2(pyda) 2(μ4-SO4) ·5H2O]· 2H2O}n(1,H2pyda = 2,6-pyridine-dicarboxylic acid) has been synthesized from the reaction of H2pyda with lanthanide nitrate in the presence of sulfate as a counter anion. The compound was characterized by elemental analysis,IR spectroscopy and X-ray single-crystal diffraction. It crystallizes in the orthorhombic system,space group Pna21,with a = 18.8558(19) ,b = 6.5831(7) and c = 18.7543(19) . The compound is a 2D hybrid,in which the La(Ⅲ) ions were doubly connected by the carboxylic group of pyda2-ligand to form the La(Ⅲ) dimer followed by being grafted into 1D zig-zag chains which are further connected into a 2D network containing {[La(SO4) ]+}n helical chains. The interchain hydrogen bonding and π-π stacking interactions extended the 2D networks into a 3D supramolecular edifice.     

Structure and Luminescent Properties of the First Cadmium Complex with Isophthalate and Di-pyrazole Ligands

The title complex [Cd(IPA)L(H2O)]n(1,H2IPA = isophthalic acid,L = 1,4-bis(pyra-zole-1-ylmethyl)benzene) has been hydrothermally synthesized,and characterized by elemental analyses,IR spectroscopy,TGA and X-ray single-crystal diffraction.It crystallizes in the triclinic system,space group P1 with a = 9.3060(6),b = 10.2374(7),c = 11.9706(8) ,α = 73.804(6),β = 77.883(5),γ = 85.942(5)°,V = 1070.7(1) 3,Z = 2,C22H20CdN4O5,Mr = 532.82,Dc = 1.653 g/cm3,μ = 1.062 mm-1,λ(MoKα) = 0.71073 ,F(000) = 536,R = 0.0392 and wR = 0.0640 for 3751 observed reflections with I > 2σ(I).Crystal structure analysis showed that complex 1 has a 1D double chain structure,which is assembled together through strong O-H...O hydrogen bonding interactions between coordinated water molecules and carboxylate groups of isophthalate to form a 2D supramolecular network.In addition,the solid-state fluorescent spectrum of 1 exhibits strong emission at 364 nm.     

GdF3∶Eu3+/NaGdF4∶Eu3+纳米晶的水热合成及发光性质

采用水热法,以聚乙二醇(400)为分散剂,以NaOH和HNO3溶液调节初始溶液pH值,合成GdF3∶Eu3+和NaGdF4∶Eu3+纳米晶。XRD和SEM结果表明:在酸性溶液(pH=3,5)、中性溶液(pH=7)和碱性溶液(pH=9)中,分别获得具有正交结构的GdF3∶Eu3+纳米晶,GdF3∶Eu3+和NaGdF4∶Eu3+混合晶,六方结构NaGdF4∶Eu3+棒状微米晶。根据Scherrer公式估算pH=3和pH=5时制备纳米晶的一次性粒径分别为49和28 nm。样品的发射光谱结果表明:特征发射峰来自于5D2、5D1、5D0到7FJ跃迁。在主晶相为GdF3样品中,主发射峰来自于Eu3+的5D0→7F1的磁偶极跃迁;晶相为NaGdF4样品的主发射峰来自于Eu3+的5D0→7F2电偶极跃迁。5D0→7F1和5D0→7F2跃迁发射相对强度比值显示:Eu3+在NaGdF4晶体中的格位对称性下降。激发光谱显示出Gd3+和Eu3+具有较好的能量传递。     

HO3+ 杂Ge-In-Sb-S玻璃陶瓷光谱特性

采用熔融淬冷法和热处理工艺制备了系列掺Ho3+的透明G eS2-In2S3-Sb2S3硫系玻璃陶瓷.测试了Ho3掺杂的基质玻璃和玻璃陶瓷样品的密度、显微硬度、红外光谱以及在900 nm激光泵浦下的近红外及中红外荧光光谱.结果表明:热处理后样品析出的晶相为In2S3和Sb2S3颗粒的混合体,晶粒尺寸限制在～100 nm以...     

Ba_3(PO_4)_2:Ce~(3+),Dy~(3+)荧光粉的组成与发光特性研究

在活性炭还原气氛下高温固相法合成了Ba3(PO4)2:Ce3+,Dy3+紫外发射荧光粉。XRD图谱表明,烧结温度为1100℃时保温处理3 h,样品为单相的Ba3(PO4)2型六方晶系结构。荧光光谱显示:单掺Ce3+样品中,Ce3+掺杂浓度为8%(摩尔分数)时样品的发光最强,发射峰的位置处在350 nm附近(Ce3+的2D→2F5/2和2D→2F7/2跃迁发射)。适量的Sr2+取代部分Ba2+离子,改变了基质晶格环境,使样品的发光强度得到提高且发射峰向长波方向红移。引入Dy3+作为敏化剂,样品发射峰红移到386 nm,亮度增强,主要是由于Dy3+和Ce3+之间发生了有效的能量传递过程。确定了Dy3+的最佳掺杂浓度为3%,发光强度提高了27%。     

毛细管电泳-电化学发光法分离检测饮料中亮氨酸

基于亮氨酸对化学发光试剂三联吡啶钌(Ru(bpy)32+)在铂电极上电致发光信号的增敏作用,建立了一种快速测定亮氨酸的毛细管电泳-电化学发光分析方法.对实验条件进行优化,最佳实验条件如下:检测电位为1.15 V;Ru(bpy)32+浓度为7 mmol·L-1(pH=8.5);进样时间为10 s;进样高压为10 kv;分...     

Tb-MOFs在荧光检测方面的研究进展

镧系离子特殊的电子排布使镧系有机骨架材料（Ln-MOFs）具有独特的发光性质,通过骨架和不同客体分子间的相互作用,可实现对诸多物质的荧光检测。其中,以铽离子（Tb3+）为中心构筑的Tb-MOFs具有更优良的光学性能和更高的检测灵敏度,是一种极具潜力的高效荧光探针。本文以稀土Tb3+为主线,综述了近年来国内外Tb-MOFs材料在阴阳离子、有机小分子、生物分子荧光检测方面的研究进展,并对未来发展趋势进行了展望。