Hydrophilic interaction liquid chromatography method for measuring the composition of aquatic humic substances

A hydrophilic interaction liquid chromatography (HILIC) method was developed to measure the composition of humic substances from river, reservoir, and treated wastewater based on their physicochemical properties. The current method fractionates the humic substances into four well-defined groups based on parallel analyses with a neutral and a cationic HILIC column, using mobile phases of varied compositions and pH. The results indicate that: (i) the proportion of carboxylic acids in the humic substances from terrestrial origins is less than half of that from treated wastewater (Jeddah, KSA), (ii) a higher content of basic compounds was observed in the humic substances from treated wastewater and Ribou Reservoir (Cholet, France) than in the sample from Loire River (France), (iii) a higher percentage of hydrophobic macromolecules were found in the humic substances from Loire River than in the other samples, and (iv) humic substances of treated wastewater contained less ionic neutral compounds (i.e., pK_a 5–9) than the waters from terrestrial origins. The physicochemical property disparity amongst the compounds in each humic substances sample was also evaluated. The humic substances from the lightly humic Loire river displayed the highest disparity, whereas the highly humic Suwannee river (Georgia, USA) showed the most homogeneous humic substances.     

Theoretical insight of nitric oxide adsorption on neutral and charged Pdn (n = 1–5) clusters

Density functional theory (DFT) calculations within the framework of generalized gradient approximation have been used to systematically investigate the adsorption of nitric oxide (NO) molecule on neutral, cationic, and anionic Pd_n (n = 1–5) clusters. NO coordinate to one Pd atom of the cluster by the end‐on mode, where the tilted end‐on structure is more favorable due to the additional electron in the π* orbital. On the contrary, in the neutral and cationic Pd₂ system, NO coordinates to the bridge site of cluster preferably by the side‐on mode. Charge transfer between Pd clusters and NO molecule and the corresponding weakening of N? O bond is an essential factor for the adsorption. The N? O stretching frequency follow the order of cationic > neutral > anionic. Binding energy of NO on anionic clusters is found to be greater than those of neutral and cationic clusters. © 2015 Wiley Periodicals, Inc.     

Solubility and physic-chemical properties of NaH2PO4 in phosphoric acid,sodium chloride and their mixture solutions at T = (298.15 and 313.15) K

In this study, solubility and physic-chemical properties of sodium dihydrogen phosphate in sodium chloride, phosphoric acid and their mixture solutions at T = (298.15 and 313.15) K have been investigated by using isothermal dissolution method. In the three systems, the solubility of NaH₂PO₄ always increases with the temperature increasing and decreases with molar concentration of phosphoric acid (sodium chloride) increasing because of the same ion effect. Solubility data of sodium dihydrogen phosphate in the mixed solution of sodium chloride and phosphoric acid is basically required for designing and optimizing the solvent extraction process in the industrial production.     

Solubility measurement and modelling of 1,8-dinitronaphthalene in nine organic solvents from T = (273.15 to 308.15) K and mixing properties of solutions

The solubility of 1,8-dinitronaphthalene in acetonitrile, methanol, ethanol, trichloromethane, isopropanol, acetone, toluene, ethyl acetate and butyl alcohol were obtained experimentally at temperatures ranging from (273.15 to 308.15) K under 0.1 MPa by using a gravimetric method. The solubility of 1,8-dinitronaphthalene in those solvents increases with an increase in temperature. The solubility values decrease according to the following order: acetone > (acetonitrile, ethyl acetate) > trichloromethane > toluene > methanol > ethanol > isopropanol > butyl alcohol. Three models, the modified Apelblat equation, Wilson and NRTL were used to correlate the solubility of 1,8-dinitronaphthalene in the solvents studied. The calculated solubility by the modified Apelblat equation provides better agreement than those evaluated by the other two models. The regressed results via the three models are all acceptable for the solubility of 1,8-dinitronaphthalene in the selected solvents. Furthermore, the mixing Gibbs energy, mixing enthalpy, and mixing entropy for per 1 mol of mixture of 1,8-dinitronaphthalene and solvents were calculated based on the Wilson model. The dissolution process of 1,8-dinitronaphthalene in the selected solvents is spontaneous and exothermic.     

二维钨-钒簇聚物[Cu（en）2]2·[WⅥ4·5WV2VVVⅣ9·5O44{Cu（en）2（H2O）}2]·3H2O的合成与表征

采用水热法合成了一个钨-钒簇聚物[Cu(en)2]2[WⅥ4.5WV2 VVVⅣ9.5O44{Cu(en)2(H2O)}2]·3H2O(1, en=乙二胺),并通过X射线单晶衍射、元素分析、傅里叶变换红外光谱、X射线粉末衍射、热重分析、价键计算、X射线光电子能谱、电子顺磁共振和磁性分析对其结构和性能进行了表征.结果表明,化合物1是以双支撑的四帽Keggin结构[WⅥ4.5WV2 VⅣ9.5O40(VVO4){Cu(en)2(H2O)}2]4-钨-钒簇合物阴离子为基本结构单元,与4个[ Cu( en)2]2+配合物阳离子以共价键和弱键相连接形成二维层状结构,相邻层又通过氢键连接成三维超分子网络.研究了化合物1的磁性及光催化降解罗丹明B的活性.     

不同WO3含量对CeO2-ZrO2-WO3催化剂在NH3选择性催化还原NO中的影响

采用水热法制备了CeO₂-ZrO₂-WO₃(CZW)催化剂,考察了WO₃含量对CZW催化剂上NH₃选择性催化还原NO_x性能的影响,并利用X射线衍射、N₂吸附-脱附、H₂程序升温还原、NH₃和NO程序升温脱附等方法对其进行了表征。结果表明,WO₃以无定形的形式存在于催化剂中,添加WO₃后显著提高了催化剂的表面酸性,并且在CZW催化剂上出现了强吸附的NO物种,从而有利于提高催化剂的活性。另外,适量的WO₃引入将增大催化剂的比表面积,促进催化剂的氧化还原性能,这将有利于提高SCR的催化活性。和CeO₂-ZrO₂催化剂相比,当WO₃的含量为20%时,CZW催化剂表现出良好的抗硫性能。此外,当空速为60 000 h^-1时,在200~463 ℃,该催化剂显示出了大于90% NO_x转化率。     

紫外光引发环氧树脂的下行前线聚合行为

采用紫外光(UV)引发法研究了221型脂环族环氧树脂的下行前线聚合行为.探讨了光引发剂、热引发剂用量和预热温度等对聚合前线的推动速率Vf和前线引发时间ti的影响,并利用傅里叶变换红外光谱(FTIR)、热重(TG)和差示扫描量热(DSC)等对固化物结构和热性能进行了表征.研究结果表明,提高光引发剂浓度、热引发剂浓度或预热温度,均可提高聚合前线的推动速率Vf,缩短引发时间ti.采用该技术制备的环氧树脂固化物具有较好的均一性及热稳定性.     

供/吸电子基团共轭桥联的双BODIPY衍生物的合成及性能

设计合成了4种对称的以不同供/吸电子基团为共轭桥、两端连接meso位苯或噻吩取代的新型氟化硼二吡咯甲川(BODIPY)衍生物;通过1H NMR,13C NMR和MS等手段对其进行了结构表征;并采用紫外吸收光谱、荧光发射光谱及循环伏安(CV)等方法研究了其光电性能.紫外光谱数据表明,BODIPY结构具有明显的特征吸收,中间的桥联基团无论是强供电子的苯并二噻吩(BDT)还是强吸电子的苯并噻二唑(BT)均不能使整个分子产生明显的分子内电子迁移(ICT).另一方面,meso位的取代基可与BODIPY核产生微弱的ICT,且meso位噻吩取代的分子比meso位苯环取代的分子表现出更强的ICT.紫外光谱数据和电化学测试结果表明,meso位噻吩取代的分子比meso位苯环取代的分子具有更低的氧化电位和更窄的能隙.     

载体表面酸碱性质对无碱水溶液中Au催化的甘油氧化反应产物选择性的调控作用

甘油(GL)是一种重要的生物平台分子,通过催化选择氧化反应将其转化为具有高附加值化学品是可持续发展化学化工的重要课题之一.以Au为催化剂的GL水相选择氧化反应可以生成甘油酸(GLA)、二羟基丙酮(DHA)、羟基丙二酸(TTA)、羟基乙酸(GCA)和乳酸(LA)等多种产物.通常,该反应需要碱(NaOH)存在时才能进行,产物往往以GLA为主(选择性40%-70%),副产物主要有GCA, TTA和草酸(OA).一般认为,可溶性碱(OH-)是通过夺取GL分子中羟基上的质子而诱发反应的.尽管在Au催化的反应体系中从未检测到有甘油醛(GLD)生成, GLD和/或DHA被认为是该反应的中间物种.本课题组前期工作表明,氧化物(TiO2, Al2O3, ZrO2, CuO等)负载的纳米Au催化剂能够在无碱(无外加OH-)水溶液中选择性催化GL氧化生成DHA(而不是GLA).因此, OH-的存在与否很可能会改变水溶液中Au催化剂上GL氧化反应的途径.本文试图回答当GL的水溶液中不存在NaOH时, Au催化剂载体的表面酸碱性质是否也会对GL氧化反应的选择性产生调控作用.我们选用Mg/Al比(x)不同的MgO-Al2O3样品为Au催化剂的载体,以尿素为沉淀剂,采用沉积沉淀法制备了相应的Au/MgO-Al2O3(x)催化剂样品.采用X射线衍射、电感耦合等离子体-原子发射光谱仪、透射电镜以及N2吸附-脱附等温线等对MgO-Al2O3(x)和/或Au/MgO-Al2O3样品的物相、元素组成、Au颗粒大小以及比表面积等进行了表征分析;采用NH3和CO2程序升温脱附(TPD)分别对MgO-Al2O3(x)载体表面的酸、碱性进行了测定. NH3-TPD和CO2-TPD结果表明,随着Mg/Al比x从0增加至4.8, MgO-Al2O3(x)的表面酸量从0.94降到0.20μmol/m2,而其表面碱量却从0.05剧增至0.80μmol/m2.因此,载体中MgO含量越多或Mg/Al比越大,其酸性越弱而碱性越强.在无碱水溶液中的催化反应结果表明, Au/MgO-Al2O3(x)上GL氧化反应的主要产物为DHA, GLA以及GCA等.随着x值(催化剂表面碱性)不断增大,产物DHA的选择性从约80%下降到10%左右,而GLA的选择性却从约4%增加至约50%.当载体为酸性最强的Al2O3(x =0)时,产物DHA的选择性为最高(80%).由此可见,载体表面的酸碱性质决定了无碱水溶液中Au催化剂上的GL氧化产物的分布. 此外,当保持Au粒子的尺寸基本不变(如3.1或6.6 nm左右),而改变载体的酸碱性质时, Au/MgO-Al2O3催化GL氧化反应的活性(TOF)可相差8-9倍.本文还通过改变Au/MgO-Al2O3样品焙烧温度,制备了表面酸碱性质相同而颗粒大小不同的三个Au/MgO-Al2O3(0.2)催化剂,考察了Au粒径对GL氧化反应选择性的影响.在这三个催化剂上, Au颗粒的平均尺寸分别为2.8,3.2和6.6 nm, GL氧化反应的产物选择性近乎相同(DHA和GLA的选择性分别为65%和15%左右),但平均尺寸为6.6 nm Au粒子的催化活性(TOF)是3.2 nm Au粒子的1.6倍,2.8 nm Au粒子的2.7倍.因此,本文建立了载体表面酸碱性质与无碱水溶液中GL氧化产物选择性之间的关系,通过改变载体表面酸碱性质实现了对无碱水溶液中Au催化剂上GL氧化反应选择性的调控.尽管载体酸碱性质和Au粒子尺寸都对Au/MgO-Al2O3催化剂的本征活性有重要影响,但载体酸碱性质的影响更显著.