增韧环氧树脂的动态裂纹扩展研究

本文主要进行了环氧及增韧环氧树脂的断裂韧性及裂纹快速扩展的试验研究。试验过程中采用了ＧＬＣ－１型高速裂纹扩展测试仪来测试裂纹的扩展速度,得到在裂纹扩展过程中裂纹扩展速度曲线。本文结合不同的计算公式及有限元分析方法,讨论了各个确定断裂韧性公式的准确程度,发现传统的静态断裂韧性的分析方法所得到的结果偏大,有一定的危险性,建议使用试验与数值计算相结合的方法;同时还发现增韧不仅可以提高材料的静态和动态断裂性能,而且在裂纹扩展过程中可以起到减缓裂纹扩展的作用     

一种表面裂纹高温断裂韧性测试方法

提出了一种表面裂纹高温断裂韧性测试方法，包括试样加热、温控和裂纹嘴张开位移测试方法．该方法适合于在相对简单的条件下测试表面裂纹高温断裂韧性．最后给出了铝合金焊缝表面裂纹高温断裂韧性的测试结果．     

研究岩石破裂等弱化行为的力－位移组合控制方法

本文介绍了一种用力和位移的线性组合控制岩石试验的新方法。该方法已在一台自制的伺服实验系统上和一台MTS实验系统上得到了实现。用这种方法能够简便地求出通常难以求出的具有Ⅱ类特性岩石的全应力-应变曲线,而且能够变化出如广义应力松驰等其它实验类型,从而能够对时间依赖性进行深入的研究。由于其易于采用的特点,它在研究岩石破裂乃至摩擦等弱化过程方面有着广泛的应用前景。     

Micromechanics of cleavage fracture initiation in ferritic steels by carbide cracking

Cleavage fracture in ferritic steels is often initiated in brittle carbides randomly distributed in the material. The carbides break as a result of a fibre loading mechanism in which the stress levels in the carbides are raised, as the surrounding ferrite undergoes plastic deformation. The conditions in the vicinity of the nucleated micro-crack will then determine whether the crack will penetrate or be arrested by the ferrite. The ferrite is able to arrest nucleated cracks through the presence of mobile dislocations, which blunt and shield the microcrack and thus lowers the stresses at the crack tip. Hence, the macroscopic toughness of the material directly depends on the ability of the ferrite to arrest nucleated micro-cracks and in turn on the plastic rate sensitivity of the ferrite. The initiation of cleavage fracture is here modelled explicitly in the form of a micro-crack, which nucleates in a brittle carbide and propagates into the surrounding ferrite. The carbide is modelled as an elastic cylinder or in a few cases an elastic sphere and the ferrite as an elastic viscoplastic material. The crack growth is modelled using a cohesive surface, where the tractions are governed by a modified exponential cohesive law. It is shown that the critical stress, required to propagate a microcrack from a broken carbide, increases with decreasing plastic rate sensitivity of the ferrite. The results also show that a low stress triaxiality and a high aspect ratio of the carbide promote the initiation of cleavage fracture from a broken carbide.     

断裂过程区应力应变场的数学分析

本文将条状分离区看作是位错连续分布区域,利用复变函数理论及切比雪夫多项式级数展开提出了一种统一的数学分析的方法,用以对均匀材料裂纹前方分离过程区的非线性效应进行有效的,精确的解析分析。避免以前各种模型一般都需要借助于有限元法或其他离散方法才能得到数值解答的难点。本文利用这一新方法,对断裂过程区是内聚力模型,条状屈服区模型的裂纹问题,受约束金属薄膜的裂纹问题,进行了分析计算,并与已有的结果进行了比较,得到了满意的结果。     

对称表面动载下有限块体的破裂过程

实验表明,受对称布置的表面爆炸载荷的脆性块体,会在通过载荷作用点连线的某一平面上破裂。为解释这一现象并进一步探讨利用类似方法破碎岩块的可能性,本文介绍了应用弹性动力学理论建立的计算模型以及所进行的动光弹和混凝土块模型试验。研究结果表明:在所述载荷条件下,应力波特别是自由界面反射的拉伸波对块体的破碎起重要作用;由于多向拉应力集中,在块体加载端面梭边中部最易产生径向裂隙,此后在侧面反射波的作用下裂隙延伸,与中部可能存在的裂纹贯通,从而将块体破开;对称加载使应力波在块体内多次叠加有利于块体充分破碎。     

Silanols cured by borates as lubricants in extrusion of LLDPE. Impact of elasticity of the lubricant on sliding friction

Addition of a viscoelastic material based on silanols cured by boron oxide was used to delay sharkskin and stick–slip instabilities in extrusion of linear low-density polyethylene (LLDPE). Delay of flow instabilities to rates of extrusion 25–35 times higher than without additive and about 40% less extrusion pressure at the same throughput are achieved by the use of this material as an additive (∼0.1%) to LLDPE or as a coating of the extrusion die. Mechanical properties of the lubricant were changed by small variations of composition to investigate the impact of elasticity on lubrication and sharkskin delay. Both lubrication and sharkskin delay were considerably improved when more elastic lubricants were used while the chemical composition of the lubricants was nearly the same. Filling the lubricants with powders of metal oxides or especially particulates having plate-like particles (kaolin, mica, BN) helped to delay the flow instabilities further to even higher throughputs. Together with experimental results, we present a tentative explanation for the importance of elasticity of polymer processing aids in the delay of sharkskin and the stabilization of slip. This paper was presented at Annual European Rheology Conference (AERC) held in Hersonisos, Crete, Greece, April 27–29, 2006.     

Intersonic crack propagation in homogeneous media under shear-dominated loading: theoretical analysis

The mechanics of cohesive failure under mixed-mode loading is investigated for the case of a steadily propagating subsonic and intersonic dynamic crack subjected to a follower tensile and shear distributed load. The cohesive failure model chosen in this study is rate independent but accounts for the coupling between normal and tangential damage. Special emphasis is placed here on mixed-mode cases with predominantly shear loading. The analysis shows that the size of the mixed-mode cohesive zone is smaller than that obtained in the pure shear case. The relative extent of the shear and tensile cohesive damage zones depends on the crack speed and the mode mixity. In the intersonic regime, the failure process takes place exclusively in shear, even under remote mixed-mode loading conditions.     

混凝土材料动态性能的经验公式、强度理论与唯象本构模型

混凝土是一种应用广泛的结构工程材料, 其材料组份复杂、变化因素多, 因而力学 特性也复杂多变. 动\linebreak 态/强冲击载荷作用下, 还涉及了材料应变率敏感效应和静水 压力相关特性等诸多影响因素, 使得其本构理论的研究更加困难. 本文中, 回顾了 近20多年来混凝土材料动态力学特性和本构关系研究方面的进展状况, 主要总结了 混凝土材料动态本构特性研究中的经验公式、强度理论和本构模型, 并在分析 比较的基础上给出了相应的讨论和评述.     

微孔洞生长对板材拉伸过程中变形局部化的影响

本文在作者提出的含孔洞材料下限本构方程的基础上，采用了初始缺陷带模型对微孔洞生长及分布对板材拉伸过程中变形局部影响进行了，分析着重研究了细观损演化规律对变形局部化模式及临界应变的影响，并成功预测了ＡＩＳＩ４３４０钢板材拉伸试件变形局部化换稳为及失稳方向。