Characterization of Kovar-to-Kovar laser welded joints and its mechanical strength

For the packaging of a pump laser in butterfly package, the most crucial assembly step is the fiber-to-laser diode coupling and attachment. The use of laser welding as the joining method offers several advantages if compared with the adhesive joints: strong joining strength, short process time and less contamination. This paper reports on laser welding process characteristics; weld strength and its fracture mode. The penetration depth and melt area of laser spot welds were found to be complicated functions of laser pulse energy, intensity, and beam diameter. Effects of pulse width, input power and size of the focal spot on the rate of energy input to the workpieces and consequently, the weld strength were reported. The weld strength was found to be dependent on the overlapping area between the two joining materials. Surface roughness, R_a, has influence on the fraction of energy absorbed, A, and therefore, affecting the penetration depth. Thermal analysis was carried out on the laser-welded joints and its heat-affected zone (HAZ) induced by various power densities was examined. These data are important in order to optimize and utilize the laser welding process as an effective manufacturing tool for fabrication of reliable pump laser.     

SWITRIM��������ƺ�ʹ�øſ�

研制出了用于计算氚投料量在FEB聚变堆各个子系统中的分布及其随时间变化的数值模拟程序包SWITRIM。通过近5年的使用，表明其运行良好、计算结果可靠。用SWITRIM数值模拟研究了聚变堆起动过程中的“氚坑深度和氚坑时间”新现象。简单介绍了SWITRIM程序包的组成和用户使用说明以及最新的运用等。     

宽频带激光自由空间传输的调制特性研究

基于惠更斯-菲涅耳衍射积分公式,研究了宽带光束在菲涅耳衍射区的自由空间传输特性,得到宽带光束传输的调制深度与光束带宽Δλ及菲涅耳数F的变化关系。结果表明:一定的带宽对光束的均匀性有适当的改善;当光束的带宽Δλ<2λ0/F时,带宽越大,光束越均匀;当带宽满足条件Δλ=2λ0/F时,菲涅耳衍射完全消失;在一定的菲涅耳数范围内,宽带光束的调制深度随菲涅耳数振荡变化,振荡曲线的主极大值和次极大值分别出现在菲涅耳数为奇数和偶数处,而极小值则出现在菲涅耳数F=2k±1/3(k=1,2,3,…)处,在极小值处光束的均匀性最好。     

Some New Results for McKean’s Graphs with Applications to Kac’s Equation

The main goal of the present paper is to sharpen some results about the error made when the Wild sums, used to represent the solution of the Kac analog of Boltzmann’s equation, are truncated at the n-th stage. More precisely, in Carlen, Carvalho and Gabetta (J. Funct. Anal. 220: 362–387 (2005)), one finds a bound for the above-mentioned error which depends on (an ^Λ+ε). On the one hand, it is shown that Λ, the least negative eigenvalue of the linearized collision operator, is the best possible exponent. On the other hand, ε is an extra strictly positive number and a a positive coefficient which depends on ε too. Thus, it is interesting to check whether ε can be removed from the above bound. According to the aforesaid reference, this problem is studied here by means of the probability distribution of the depth of a leaf in a McKean random tree. In fact, an accurate study of the probability generating function of such a depth leads to conclude that the above bound can be replaced with (a′ n ^Λ).     

Optical characteristics of semiconductor saturable absorber mirrors investigated by the reflection Z-scan technique

Recently, the semiconductor saturable absorber mirror (SESAM) has become a key component of passive mode-locked solid-state lasers. Here we present a simple method based on the reflection Z-scan technique to measure the key optical parameters of SESAM such as saturation fluence and modulation depth. The experimental results demonstrate that our method is able to perform with a high accuracy of 10⁻⁴ and a dynamic range of over four orders of magnitude.     

A New Method to Examine Interfacial Reactions of a Multilayered System NiAl–Hf–hBN on a Sapphire Fibre

Fibre reinforced NiAl offers new possibilities for the development of high strength structural materials of low density applicable in gas turbines at high operating temperatures. The properties of composite materials are strongly influenced by the strength of the fibre–matrix interface. In addition, if fibre and matrix differ in their thermal expansion coefficients, a well controlled interface reaction at high temperature changes is demanded. Therefore, two layers consisting of BN and Hf were embedded between a sapphire fibre and NiAl and heated at 1350 °C to find a compromise between adhesion and ductility. The control and characterization of the reaction zone is essential for the development of these new materials. Especially, the characterization of the fibre-coating interface is a challenge. The different hardness of fibre and coating makes it nearly impossible to use a conventional cross-section preparation. Further, the small dimension of the reaction zone requires the use of analytical techniques providing high lateral resolution. In order to accomplish these requirements, a newly developed technique FIB (Focused Ion Beam)-EPMA (Electron Probe Microanalysis) was combined with XRD (X-ray diffraction). XRD was performed for the identification of the phases. The reaction zone was exposed by a special FIB preparation technique and examined by surface-sensitive EPMA. This allowed to determine the spatial distribution of the different phases.     

BEPCII横向束流反馈系统的梳状滤波器

 BEPCII是一个多束团、大流强的装置, 由于高频腔的高次模和电阻壁阻抗等因素，不可避免地会出现束流不稳定性。BEPCII中采用束流反馈系统来抑制束流不稳定性。横向束流反馈系统主要包括前端电子学、信号处理电子学、反馈器件和放大器等几个部分。梳状滤波器是信号处理电子学的重要部件，利用两根长短不同的电缆以及一个功分器和合成器构成了一种简单有效的梳状滤波器，其梳状深度达到-41 dB，使用这种梳状滤波器的横向反馈系统成功地抑制了束流中出现的不稳定性。     

Optimizing thermography depth probing with a dynamic thermal point spread function

Derivation of two point spread functions PSFs suitable for infrared thermograms analysis is illustrated, based on two unique approaches, one based on depth decaying limit and one on diffusion limit. Experimental work using PMMA sample with back drilled holes and pulsed thermographic routine is utilized to show the effectiveness of deconvoluting pixel temperature transient history with suggested PSF’s. Synthetic second time derivative thermograms are utilized for comparison and the signal to noise ratio is used as a figure of merit for quantification.     

Analytical approaches to the delta-Eddington model of the radiative transfer through vertically inhomogeneous optical depths

Analytical approaches have been developed for one-dimensional monochromatic delta-Eddington radiative transfer equation through a vertically inhomogeneous medium. They are based on the solution of the Riccati equation that arises from the decoupling of the two-stream radiances, and seek to approximate the exponent functions in the solution as opposed to finding the solution as a whole. Depending on the case, Green–Liouville approximation or other techniques presented in this paper are utilized for finding these exponents. Though developed for atmospheric radiative transfer problems applicable to the global climate change modelling, and for non-invasive medical applications on tissue–light interactions, the techniques considered here are quiet general in nature. Hence, they can also be useful in other boundary value problems of the diffusion type that involve linear second order ordinary differential equations with variable coefficients.     

On the Water Depth in the Breach during a Partial Dam Break

Theoretical and experimental data which make it possible to find the flow-rate, momentum and energy of the fluid that enters the lower pool after a discontinuity breakdown (dam break) in a rectangular channel with an even bottom, a step (sharp downstream rise in the bottom), a shelf (sharp drop in the bottom), and a threshold on the bottom are presented.