硫源和六元瓜环对硫化镉性质的影响

以硫代硫酸钠和硫脲为硫源,氯化镉为镉源,六元瓜环(Q[6])为修饰剂,采用水热法制备Q[6]/CdS复合光催化剂.利用傅里叶变换红外光谱、X射线粉末衍射和扫描电子显微镜对产物进行结构和形貌表征,考察Q[6]和硫源对产物结构和性能的影响.结果表明,硫源对产物形貌和结构都有影响,Q[6]对硫化镉光催化性能有增强作用,15 mg Q[6]/CdS能使50 mL,6 mg/L的次甲基蓝溶液反应200 min时的降解率达到93.0;以上.     

g-C3N4-W18O49复合光催化剂的制备及其光催化机理研究

通过简单的溶剂热法成功制备出了g-C3N4-W18O49复合光催化剂,采用XRD、SEM、TEM以及PL对所得催化剂的物相结构及形貌和光学性能进行了表征,通过降解甲基橙和光解水产氢实验研究所得催化剂的催化性能及其催化机理.由实验可知,W18O49的含量为50;时所得g-C3N4-W18O49复合光催化剂的降解性能最好,其降解率比纯g-C3N4纳米片提高48;;为进一步研究复合光催化剂的电子-空穴传输机理,我们又进行了光解水制氢实验.结果表明:单一的W18O49无产氢活性,它的复合明显降低了g-C3N4的产氢速率,说明复合结构中光生电子是从g-C3N4传递到了W18O49,表现出明显的Ⅱ型异质结复合特征,而不是部分文献所提出的Z型方式.     

CoP纳米片制备及其电催化产氢性能的研究

高稳定性的催化剂对于规模化电催化产氢起着关键的作用.因此,采用简单的方法合成CoP纳米片,其表现出优越电催化活性和稳定性. CoP纳米片采用水热法和在氩气中磷化法制备的,纳米片的厚度为100～300 nm.CoP纳米片在0.5 M H2SO4的电解质中,表现出良好的电化学产氢性能,起始过电为～75 mV,塔菲尔斜率为～39. 67 mV/decade,当电流密度为10 mA· cm-2,过电压为～125 mV,经过1000次的循环后,保持良好的稳定性能.     

掺杂稀土铁磁性纳米复合粉体的制备

采用水热法以FeCl2和KOH为原料制备Fe3 O4粉体,以氧化钇、氧化铕和氧化铽为原料制备Y2 O3:1;Eu3+,5;Tb3+粉体,然后以Fe3 O4粉体,Y2 O3:1;Eu3+,5;Tb3+粉体和三聚氰胺为原料,采用微波烧结法在Ar气气氛下制备FeYO3/Y2 O3:1;Eu3+,5;Tb3+复合粉体,利用XRD衍射仪对各种粉体的结构进行分析,利用扫描电镜对复合粉体的形貌进行观察,并利用振动样品磁强计对复合粉体的磁学性能进行研究.结果表明:复合粉体均呈针状,长度和细度均为纳米级.当Fe3 O4,Y2 O3:1;Eu3+,5;Tb3+和三聚氰胺比例为1:3:4时,所制备的FeYO3/Y2 O3:1;Eu3+,5;Tb3+粉体磁力最强,磁力饱和强度为11.3 emu·g-1.     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

碱金属盐催化1,2,4-三唑与α,β-不饱和酮及二酰亚胺的氮杂Michael反应

发展了一种高效的碱金属盐催化1,2,4-三唑与α,β-不饱和酮及α,β-不饱和二酰亚胺的氮杂Michael加成反应的新方法,以中等到优异的产率得到目标产物.该方法原料易得,底物普适性好,反应条件温和,易实现克级规模的制备.产物容易转化为相应的γ-氨基醇.     

固-液两相流黑水管道冲蚀磨损的数值模拟研究

煤气化黑水处理系统管道由于其流体介质高含固体颗粒和腐蚀性介质，且工作在高温、高压差环境中，极易受到冲蚀磨损和腐蚀的耦合作用而失效，影响其服役寿命. 采用计算流体力学(CFD)方法数值模拟研究了煤气化黑水处理系统固-液两相流管道的冲蚀磨损行为和机理，以及流体介质速度和固体颗粒粒径对管道冲蚀磨损的影响规律，并分析了盲通管和涡室结构对弯管冲蚀磨损行为的优化改善效果. 研究结果显示，煤气化黑水处理系统管线的冲蚀高危区主要分布在弯管外拱和变径管等结构突变区域；管道冲蚀磨损行为与其内部流体的运动和颗粒冲击特性有关；管道的冲蚀率均随着流体速度的增加而加剧，而粒径对弯管和变径管冲蚀率的影响并非单调关系，这与颗粒受力作用有关；弯管优化分析显示，涡室结构可以降低弯管的最大冲蚀率，减缓弯管的冲蚀磨损.      

高效液相色谱手性固定相法拆分BETTI碱及其衍生物对映体

在纤维素三（3,5-二甲基苯基氨基甲酸酯）（Chiralcel OD-H）和Pirkle型(R, R)-Whelk-O1手性柱上对手性氨基酚1-(α-氨基苄基)-2-萘酚（Betti 碱）及其衍生物1-(α-苄氨基苄基)-2-萘酚和1-(α-哌啶基苄基)-2-萘酚对映体分离进行了研究，分别考察了在正己烷流动相中，碱性添加剂、醇类添加剂的种类和浓度对手性拆分的影响。结果表明：溶质在Chiralcel OD-H柱上的分离效果好，而在(R, R)-Whelk-O1手性柱上只有1-(α-苄氨基苄基)-2-萘酚部分分离。研究了空间立体结构因素对手性分离的影响，初步探讨和比较了溶质在这2种手性柱上的手性识别机理。发现对(R, R)-Whelk-O1柱，溶质与固定相之间的吸引作用很小，而对于Chiralcel OD-H柱，溶质在手性空腔中的空间适应性很可能是手性识别的关键。     

核电结构土-结相互作用分析分区混合计算方法

土-结构相互作用分析是核电结构进行抗震设计和安全评估的重要环节.在核电结构的土-结相互作用分析中,阻尼和非线性是影响结构反应的重要因素. 若采用频域分析,可以方便考虑阻尼,但需通过等效线性化来考虑非线性,不适合于强震作用下的土体非线性.若采用时域分析的逐步积分方法,适合于考虑非线性,但材料阻尼一般采用瑞利阻尼模型,除了紧靠指定阻尼比的少数几个振型外,其他振型的反应将受到瑞利阻尼模型所确定的大阻尼所抑制,造成地震反应与真实情形有较大差异.若采用时域分析的模态叠加法,可合理计入阻尼效应,但模态叠加法不能考虑非线性.因此,如何合理考虑阻尼和非线性是核电结构土-结相互作用分析需要关注的问题.基于此,本文提出一种模态叠加和时步积分结合的土-结相互作用分区算法.其中,出于安全性考虑,地震作用下核电主体结构一般不允许进入非线性,因此结构可采用模态叠加方法,以便合理考虑结构阻尼;土体和基础采用显式时步积分法,可考虑土体非线性;通过人工边界条件考虑无限域的影响 (辐射阻尼).通过简单算例对该方法进行了验证,并用于CAP1400核电结构的土-结相互作用分析中,对比分析了采用模态阻尼和瑞利阻尼时核电结构和场地反应的差异,结果表明结构阻尼模型对场地的反应影响不大,但对结构反应影响明显,在实际工程中应合理选取阻尼模型.