X-ray photoelectron spectroscopy and Raman microscopy of a ferroan platinum crystal from the Kondyor Massif,Russian Far East

X-ray Photoelectron Spectroscopy was used to study a ferroan platinum crystal from the Kondyor Massif, Russian Far East. Prior to the X-ray Photoelectron Spectroscopic analyses, the nature of the crystal was confirmed by X-ray diffraction. The survey scan showed mainly the presence of Pt and Fe, with smaller amounts of O and Si. The high resolutions spectra of the Pt 4f and Fe 2p showed 18.3 atom% Fe in the crystal, which puts the composition on the lower boundary for ferroan platinum and confirms earlier analyses using other methods such as Scanning Electron Microscopy-Energy Dispersive X-ray analysis/microprobe. The binding energy of the Pt 4f5/2 was 74.0?eV and Pt 4f7/2 70.5?eV, while the Fe 2p3/2 for metallic Fe was observed at 707.2?eV. The Fe 2p3/2 for metallic Fe was significantly sharper than that of Fe 2p3/2 at 710.7?eV associated with surface material. The Raman spectrum was dominated by the Pt–Pt stretching mode at 253?cm^?1. Changed orientation resulted in the observation of two bands at 127 and 139?cm^?1, interpreted as being due to stretching modes of two Pt–Pt bonds with the third bond to Fe and Pt fixed. The presence of Ca-Fe-Al-Mg-Si-O on the surface was probably associated with the presence of a clinopyroxene. These minerals can be expected since the crystal came originally from a clinopyroxenite-dunite matrix. The spectra showed a variety of interferences, e.g. Al 2p with Pt 4f, Mg 2p with Fe 3p, and Ca 2p1/2 with Mg Auger, making exact determinations of the ratios of these elements difficult.     

Liquid-Repellent Metal Oxide Photocatalysts

Metal oxide photocatalysts (MOPCs) decompose organic molecules under illumination. However, the application of MOPCs in industry and research is currently limited by their intrinsic hydrophilicity because MOPCs can be wetted by most liquids. To achieve liquid repellency, the surface needs to possess a low surface energy, but most organic molecules with low surface energy are degraded by photocatalytic activity. Herein, current methods to achieve liquid repellency on MOPCs, while preventing degradation of hydrophobic coatings, are reviewed. Classically, composite materials containing MOPCs and hydrophobic organic compounds possess good liquid repellency. However, composites normally form irregular coatings and are hard to prepare on surfaces such as those that are mesoporous or nanostructured. In addition, the adhesion of composites to substrates is often weak, resulting in delamination. Recent studies have shown that the direct grafting reaction of polydimethylsiloxane (PDMS) from silicone oil (methyl-terminated PDMS) under illumination results in a stable polymer brush. This easy and simple grafting method allows us to create stable liquid-repellent surfaces on MOPCs of various types, structures, and sizes. In particular, super-liquid-repellent drops with an underlying air layer can be created on PDMS-grafted nano-/microstructured MOPCs. Potential applications of surfaces combining liquid repellency and photocatalytic activity are also discussed; thus offering new ways of using MOPCs in a wider range of applications.     

Diffraction of electromagnetic waves by a resistive half-plane in magneto-ionic plasma

The interaction of magnetic polarized electromagnetic wave with a resistive half-plane in magneto-ionic plasma is investigated. The method of transition boundary is used for the evaluation of the diffracted wave. The excitation of surface waves is examined in the medium and their diffracted fields are derived by using the diffraction theory for grazing incidence. The uniform field expressions are obtained with the aid of the uniform theory for evanescent waves. The behaviours of the derived scattered waves are studied numerically.     

On the use of surfaces of section in the N-body ring problem

In the N-body ring problem, we investigate the motion of a massless body interacting with N bodies of equal masses at the vertices of a regular polygon that rotates around a central mass. In this paper, we analyze the use of different surfaces of section in the numerical exploration of the escape in the N-body ring problem in order to get some conclusions about the geometry of the basins of escape in the corresponding configuration spaces.     

Simultaneous analysis of current‐use pesticides and their transformation products in water using mixture‐sorbent solid phase extraction and high‐performance liquid chromatography–tandem mass spectrometry

Pesticides have posed significant threats to aquatic ecosystems, yet little is known about their transformation products. The challenge is to simultaneously analyze various pesticides and transformation products in water as they have distinct physicochemical properties. A mix‐mode solid phase extraction method was established to simultaneously analyze current‐use pesticides and their transformation products using a mixture of hydrophile–lipophile balance, weak anion, and cation exchange resins (2:1:1, w/w/w) in combination with high‐performance liquid chromatography and tandem mass spectrometry for chemical quantification. Neutral, acidic, and alkaline methanol were used as the elution solvent. Box‐Behnken design was applied to optimize extraction conditions. Optimal conditions were as follows: sorbent mass, 200 mg; volume of elution solvent, 5 mL × 3; pH 4. The method was validated for compounds at concentrations from 20 to 1000 ng/L in different types of water samples, with recovery being from 43.5 ± 3.1 to 141 ± 35%. Low method detection limits (0.02?5.6 ng/L) implied that the developed method was sensitive. Finally, the method was applied to monitor current‐use pesticides and their transformation products in natural waters. Frequent detection of transformation products of pesticides indicated that their contribution to aquatic risk should not be ignored.     

An insight into the potent antioxidant activity of a dithiocarbohydrazone appended cis-dioxidomolybdenum (VI) complexes

In search of antioxidants with enriched potency, the present study focus on the design and synthesis of a dithiocarbohydrazone, H₃TCL derived from thiocarbohydrazide and 3-ethoxysalicylaldehyde and its coordination complexes with molybdenum, viz, [MoO₂(HTCL)D] ( 1 – 2 ) (where D = methanol ( 1 ), DMSO ( 2 )) and [MoO₂(HTCL)D]·DMF (where D = H₂O ( 3 )). The synthesized compounds were characterised by elemental analysis, spectroscopic techniques (FT-IR, UV–vis and ¹H-NMR), conductivity measurements and cyclic voltammetry. Moreover the solid state structures of all the three complexes were established by single crystal X-ray diffraction analysis as mononuclear neutral species in which the molybdenum centre assumes a distorted octahedral geometry. The dithiocarbohydrazone binds to the molybdenum centre through its phenolate oxygen, O(1), azomethine nitrogen, N(1) and thioenolate sulfur, S(1) in a dianionic tridentate mode. The assessment of intermolecular contacts in the crystal arrangement was quantified using Hirshfeld surface analysis. Further the antioxidant potential of the dithiocarbohydrazone, H₃TCL and its molybdenum complexes 1 – 3 were evaluated using 1,1-diphenyl-2-picrylhydrazyl(DPPH), 2,2′-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) and total antioxidant assays. The antioxidant activities were then compared with standard antioxidant, L-ascorbic acid. The antioxidant potential of the synthesized compounds were then validated by molecular docking studies. Molecular modelling study was achieved to evaluate the recognition of target compound at the binding pocket of the human antioxidant enzyme, 3MNG. The docking results showed that the complexes selectively bond to the vital amino acids present in the binding pocket of the target enzyme, 3MNG.     

磁光平面波导的单向传播特性

表面磁等离子体(surfacemagnetoplasmons,SMPs)是一种在电介质和偏置磁场作用下磁光材料界面处传播的近场电磁波.其独特的非互易传播特性引起了大量科研工作的关注,但在具体的波导结构设计上仍存在很多问题.本文研究了一种银-硅-磁光材料的3层平面波导结构,SMPs在磁光材料和硅的界面处传播,发现在特定的频率范围内,SMPs的基模及高阶模式均具有正向或反向的单向传播特性.分别计算了旋磁与旋电材料平面波导的色散方程,研究了硅层厚度与外加磁场对能带结构及SMPs单向传播区域的影响,发现无论是旋磁或旋电材料的结构,硅层厚度的增加使高阶模式使高阶模式出现在更低的频率位置,使单向传输带宽变小甚至消失,外加磁场的变大使磁光材料的能带结构频率增大的同时带隙中也引入了高阶模式.计算了2种磁光材料平面波导的正向和反向的单向传播带宽宽度,发现旋磁材料YIG的单向SMPs模式出现在GHz波段,最大单向带宽可达到2.45 GHz;旋电材料InSb的单向SMPs模式出现在THz波段,最大单向带宽达到3.9 THz.     

过载作用下聚乙烯疲劳裂纹扩展行为研究

论文针对中密度聚乙烯材料(MDPE)，采用平板试样进行了I型疲劳裂纹扩展和单次过载下裂纹扩展试验．发现与金属材料类似，单次拉伸过载对聚乙烯(PE)的疲劳裂纹扩展有明显的迟滞作用，降低了裂纹扩展速率．试验还通过变载荷刻线法获取疲劳裂纹扩展前缘的实际形貌和变化规律，对常规变载荷刻线方法进行了调整和验证，其修正方法对高分子材料的疲劳裂纹扩展前缘刻线具有较好的效果．通过观察发现含楔形塑性区的裂尖钝化是裂纹迟滞的主要原因．过载引入的塑性区内残余应力对裂纹迟滞也起了重要作用．论文利用Dugdale模型计算了塑性区尺寸，使用基于残余应力的Wheeler模型对过载迟滞进行了很好的拟合．