Optically pumped CW fir laser: New submillimeter laser emissions from CH2DOH, CH3I, CD3I, and trioxymethylene

We obtained twelve new far infrared laser transitions by optically pumping the CH₂DOH, CH₃I, CD₃I and Trioxymethylene molecules with a CW CO₂ laser having a tunability range of 280 MHz. We measured the wavelength, polarization, relative intensity and pump offset relative to the CO₂ center frequency for all the new lines.     

Optically pumped submillimeter laser lines from CD2Cl2 using a large tunability CW CO2 laser

Twenty-five new laser lines have been obtained in the wavelength region from 155 to 830 μm by optically pumping the CD₂Cl₂ (deuterated dichloromethane) molecule with a CW CO₂ laser having a tunability range of 300 MHz. The wavelength, polarization relative to that of CO₂ pumping radiation, and offset relative to the CO₂ center frequency were determined for all of the new lines and some other already known laser emissions. For all of them we give also the relative intensity and the optimum pressure of operation. Permanent address: Depto de Física e Química da FEIS — UNESP 15.378-000 Ilha Solteira-SP, Brazil     

Absolute frequency measurement of CO2 laser lines with a femtosecond laser comb and new determination of the CO2 molecular constants and frequency grid

Absolute frequency measurements of a CO₂ laser stabilized on saturated absorption resonances of CO₂ laser lines are reported. They were performed using a femtosecond-laser frequency comb generator and two laser diodes at 852 and 782 nm as intermediate oscillators, with their frequency difference phase-locked to the CO₂ laser. Twenty ¹²C¹⁶O₂ laser lines in the P and R bands at 9 μm were measured with a relative uncertainty of a few 10⁻¹² limited by the CO₂ frequency reproducibility. A new determination of the CO₂ molecular constants was obtained from these data and previous measurements in the 10 μm band. The CO₂ frequency grid was also calculated, with an improvement of two orders of magnitude compared to the previous grid of Maki et al. [J. Mol. Spectrosc. 167 (1994) 211].     

Measurements and assignments of new large offset CD3OH FIR laser lines

By using an acoustooptic modulator we extend the 300 MHz tunability of a waveguide CO₂ laser to 480 MHz. The CD₃OH was optically pumped by the 10R(32), 10R(34), and 10R(36) CO₂ laser lines, and 17 new FIR laser lines were discovered. The Stark effect on previously known FIR laser lines was investigated, and some tentative FIR laser lines assignments are suggested.     

Diffractive scanning mechanism for laser marker

We present a new idea of marking based on spectral properties of CO₂ laser radiation. The idea has been illustrated on RF excited waveguide CO₂ lasers in different configurations: single channel, multi-waveguide and slab-waveguide ones. The pulse operation of the laser has been considered as well. The advantage of the presented diffraction marker is avoiding complicated and fallible mechanical elements. The only executive elements of the marker are a diffraction grating and a piezoceramic transducer. It has been shown that the slab-waveguide configuration of the RF excited CO₂ laser equipped with an unstable resonator is the most promising configuration for application to the diffraction marker.     

Optimization of three gas compositions in a CO2 laser

Three pressures of gases (CO₂, N₂ and He) added into CO₂ laser tube are optimized for obtaining maximal laser output power by applying a genetic algorithm and solving the CO₂ laser kinetics equations. After the optimization, the laser power is increased by 96% as compared with a non-optimal case.     

FIR Laser Lines from CH3OD: A Review

The methanol isotopic species CH₃OD has also proved to be an efficient and powerful medium to generate radiation in the far infrared (FIR) region. After the critical review of 1994, six papers have been published dealing with new FIR laser lines from this molecule. As a consequence of the use of wide tunability waveguide CO₂ lasers as well as a new pulsed CO₂ laser operating at hot and sequential bands, as of optical pumping sources, the total number of the FIR laser lines increased from 122 in 1994 to 227 today. In this communication we present an updated and complete catalogue of FIR laser lines generated from CH₃OD. Information on wavelength, offset, relative polarization, intensity, and optimum operation pressure is generally available.     

Optically Pumped Far-Infrared Laser Lines of Methanol Isotopomers: 12CD3OH, 12CH3OD, and 12CH2DOH

Twenty-seven new FIR, far-infrared, laser lines from the isotopomers of methanol: ¹²CD₃OH, ¹²CH₃OD, and ¹²CH₂DOH, were obtained by optically pumping the molecules with an efficient cw CO₂ laser. The CO₂ laser provided pumping from regular, sequence, and hot-band CO₂ laser transitions. The 2 m long far-infrared cavity was a metal-dielectric waveguide closed by two, flat end mirrors. Several short-wavelength (below 100 m) lines were observed. The frequencies of 28 laser lines observed in this cavity (including new lines and already known lines) were measured with a fractional uncertainty limited by the fractional resetability of the far-infrared laser cavity, of 2 parts in 10⁷.     

An injection-locked single-mode tea CO2 laser for SMM laser pumping

A D₂O laser has been developed for collective Thomson scattering measurements of ion temperature in high temperature plasmas. A pulse duration and a spectral width of a high power D₂O laser has been successfully controlled for this purpose, by using a TEA CO₂ laser injection-locked by an etalon-tuned TEA CO₂ laser as a pump source.     

Optically-Pumped Far-Infrared Laser Lines of Methanol Isotopomers: 12CH3OH, 12CH3OD, and 12CH2DOH

Twenty-seven new far-infrared laser lines from the isotopomers of methanol: ¹²CD₃OH, ¹²CH₃OD, and ¹²CH₂DOH, were obtained by optically-pumping the molecules with an efficient cw CO₂ laser. The CO₂ laser provided pumping from regular, sequence, and hot-band CO₂ laser transitions. The 2-m long far-infrared cavity was a metal-dielectric waveguide closed by two, flat end mirrors. Several short-wavelength (below 100 m) lines were observed. The frequencies of 28 laser lines observed in this cavity (including new lines and already known lines) were measured with a fractional uncertainty limited by the fractional resetability of the far-infrared laser cavity, of 2 parts in 10⁷.     

New CH2F2 FIR laser lines pumped by a tunable WG CO2 laser

8 new large offset FIR laser lines of CH₂F₂ have been discovered by pumping with a high tunability waveguide CW CO₂ laser. Optoacoustic measurements of CH₂F₂ have also been performed and the pump offsets of the new and of previously known lines have been measured and checked. Some assignments are proposed and a few assignments found in literature are checked     

Acoustooptic extension of the frequency tunability of CW CO2 lasers: New FIR lasers emissions from CH3OH and13CH3OH

We have increased the frequency tunability of our CW waveguide CO₂ lasers by means of an acoustooptic amplitude modulator, operating at the fixed frequency of 90 MHz. The up-shifted, or down-shifted, laser optical sideband can be generated independently by adjusting the orientation of the modulator. The efficiency is larger than 50%. The frequency tunability of the CO₂ laser around each laser line is thus increased by 180 MHz. To demonstrate the possibilities of this method, a source composed of the above modulator and of a CW, 300 MHz tunable waveguide CO₂ laser has been used for the search of new large offset FIR laser lines from optically pumped CH₃OH and¹³CH₃OH molecules. As a result 15 and 10 new large offset laser lines were discovered respectively. New assignments of some laser lines are also proposed. We have also measured the Stark effect, the offset, and the polarization of other already known lines. In particular a Stark effect frequency tuning of about 1 GHz is demonstrated for a laser line at 208.399 m.     

New FIR laser lines and frequency measurements for optically pumped CD3OH

Twenty new cw FIR laser lines in CD₃OH, optically pumped by a CO₂ laser, are reported. The frequencies of 39 of the stronger laser lines were measured relative to stabilized CO₂ lasers with a fractional uncertainty, as determined by the reproducibility of the FIR frequency itself, of 2 parts in 10⁷.Contribution of the U.S. Government, not subject to copyright.     

Injection locked single mode operation of a tea CO2 laser with high energy extraction

Generation of reproducible smooth pulses from longitudinal mode control of a TEA CO₂ laser by signal injection from a cw CO₂ laser is reported and the operating conditions investigated for several new geometries. Applied to unstable resonators, the efficient and spectrally pure, high power output obtains has important application in the area of optical pumping.     

Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment

The fracture toughness property (K_1C) of Si₃N₄ and ZrO₂ engineering ceramics was investigated by means of CO₂ and a fibre laser surface treatment. Near surface modifications in the hardness were investigated by employing the Vickers indentation method. Crack lengths and the crack geometry were then measured by using the optical microscopy. A co-ordinate measuring machine was used to investigate the diamond indentations and to measure the lengths of the cracks. Thereafter, computational and analytical methods were employed to determine the K_1C. An increase in the K_1C of both ceramics was found by the CO₂ and the fibre laser surface treatment in comparison to the as-received surfaces. The K_1C of the CO₂ laser radiated surface of the Si₃N₄ was over 3% higher in comparison to that of the fibre laser treated surface. This was by softening of the near surface layer of the Si₃N₄ which comprised of lowering of hardness, which in turn increased the crack resistance. The effects were not similar in ZrO₂ ceramic to that of the Si₃N₄ as the fibre laser radiation in this case had produced an increase of 34% compared to that of the CO₂ laser radiation. This occurred due to propagation of lower crack resulting from the Vickers indentation test during the fibre laser surface treatment which inherently affected the end K_1C through an induced compressive stress layer. The K_1C modification of the two ceramics treated by the CO₂ and the fibre laser was also believed to be influenced by the different laser wavelength and its absorption co-efficient, the beam delivery system as well as the differences in the brightness of the two lasers used.     

Optoacoustic Laser Stark spectroscopy and FIR laser action on CH3Br using a waveguide CO2 laser

The optoacoustic spectrum of CH₃Br around 10 m band lines of a tunable cw waveguide CO₂ laser is investigated. Several new infrared absorptions are observed and most of the correspond ing molecular transitions are assigned. Far infra red laser action is reported by pumping with the same CO₂ laser: pump offsets are given using the Transferred Lambs dip (TLD) technique. A new FIR laser emission is obtained and assigned. An optoacoustic Laser Stark spectroscopy technique is used to investigate off resonance infrared tran sitions.     

Theoretical prediction on the wavelength-temperature shift in pulsed TE CO2 lasers

The wavelength-temperature shift observed in pulsed TE CO₂ lasers is discussed theoretically by means of Six-temperature model rate equations for tunable TE CO₂ lasers. Numerical calculations of the temperature-wavelength shift in a pulsed TE CO₂ laser with a simple plano-concave stable resonator, whether excited by conventional low-inductance fast-discharge scheme or by a long-pulse Pulser/sustainer discharge scheme, show that the laser output wavelengths are within the 10P branch as the ambient temperature varies from 228 to 338 K, but will change as the ambient temperature varies. The laser output wavelengths will move to the transition lines with longer wavelengths in the 10P branch as the ambient temperature increases and vice versa. The calculated results also illustrate that near the ambient temperature of 310 K, the laser is more likely to operate on multi-transition lines. Considering this wavelength-temperature shift, the chilling device adopted in high-power high repetition rate TE CO₂ lasers is important in maintaining a stable laser output spectra as well as a stable laser output power. The numerical results also suggest that a frequency agile resonator is highly recommended if stable laser output spectra are required in TE CO₂ lasers.     

Nanoimprint lithography using IR laser irradiation

A new technique called “infrared laser-assisted nanoimprint lithography” was utilised to soften the thermoplastic polymer material mR-I 8020 during nanoimprint lithography. A laser setup and a sample holder with pressure and temperature control were designed for the imprint experiments. The polymer was spin coated onto crystalline Si <1 1 1> substrates. A prepatterned Si <1 1 1> substrate, which is transparent for the CO₂ laser irradiation, was used as an imprint stamp as well. It was shown, that the thermoplastic resist mR-I 8020 could be successfully imprinted using the infrared CW CO₂ laser irradiation (λ = 10.6 μm). The etching rate of the CO₂ laser beam irradiated mR-I 8020 resist film under O₂ RF (13.56 MHz) plasma treatment and during O₂ reactive ion beam etching was investigated as well.     

Far infrared stimulated emissions from CO2 laser excited dichloromethane

Six new far-infrared laser frequencies have been obtained in CO₂-laser excited dichloromethane. Competing transitions have enabled assignments to be made to the v₇ band.     

AC-chopper application for CW CO2 laser

A microprocessor-based algorithm was developed to control the power supply to a CO₂ laser using an AC-chopper method. This system was connected directly to a CO₂ laser tube without the need for a dc-dc converter or the storage capacitance of a multilevel circuit. The typical CO₂ laser power supply system had a full-bridge series resonant inverter or voltage multiplier. AC-to-AC converter schemes using zero voltage switching (ZVS) can be used efficiently and economically for low and medium power applications.This paper reports the performance characteristics of a symmetrical AC-chopper technology that can maintain the quality of the ac output of a CO₂ laser tube, regardless of the amount of switching loss. The laser was operated to an output power, maximum system efficiency total gas mixture of 37.2 W, 92%, and CO₂:N₂:He=1:9:15, respectively. The laser system, AC-chopper power supply and its operation were examined.