Role of WO3 in structural and optical properties of WO3-Al2O3-PbO-B2O3 glasses

Glass samples of composition xAl₂O₃-20PbO-(80−x)B₂O₃ and xWO₃-xAl₂O₃-20PbO-(80−2x)B₂O₃ with x varying from 0% to 10% mole fraction are prepared by melt quench technique. The optical band gap decreases (from 3.21 to 2.37 eV) more for WO₃-Al₂O₃-PbO-B₂O₃ glasses with an addition of WO₃ content. The FTIR spectral studies have pointed out the conversion of structural units of BO₃ to BO₄ and WO₄ to WO₆ in these glasses. The increase in density from 4.51 to 5.80 g cm⁻³ for WO₃-Al₂O₃-PbO-B₂O₃ glasses is observed with an increase in WO₃ content. This is observed that the atomic structure changes more with the incorporation of WO₃. This is due to the formation of WO₆, WO₄ and BO₄ units.     

Influence of reactive gas and temperature on structural properties of magnetron sputtered CrSiN coatings

CrSiN coatings were deposited on stainless steel (Grade: SA304) and silicon Si(1 0 0) substrates, with varying argon-nitrogen gas proportions and deposition temperature, using reactive magnetron sputtering technique in the present work. The influence of sputtering (Ar) and reactive gas proportions (N₂) and temperature on the structural properties of the CrSiN coating was investigated. A small amount of silicon content (3.67 at.% Si) plays a crucial role in addition to the nitrogen content for the formation of different phases in the CrSiN coatings as observed in the present work. For example, the coating with comparatively low nitrogen content, 40% N₂, during deposition, formed a crystalline structure consisting of nano-crystalline CrN which is separated by an amorphous SiN phase, as evident from X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The formation of CrN(1 1 1) and Cr₂N(1 1 1) phases has occurred at 30% N₂ with 3.67% Si content, which transformed in to CrN(1 1 1) and CrN(2 0 0) with increase in N₂ content but with same Si content. The surface topography and morphology of the coatings were analyzed by atomic force microscopy (AFM) and field emission scanning electron microscopy (FESEM), respectively. A less columnar growth is observed in CrSiN coatings deposited at low argon content, Ar:N₂ (20:80), and with 3.67 at.% Si in the coatings. However, it becomes dense with increase in nitrogen content and temperature. The XRD analysis showed that the intensity of a dominating peak (1 1 1) is decreasing from (80:20) to (60:40) argon:nitrogen environment. With a further increase of nitrogen content, from (60:40), in the sputtering gas mixture, to (40:60) argon-nitrogen, there is a sudden increase in (1 1 1) peak and above (40:60), the peak reduction rate is very slow than the previous one. The (1 1 1) and (2 0 0) peak intensity variations are very limited due to high nitrogen content, above 50%, and considerable amount of Si atoms, 3.67 at.%, present in the CrN coatings.     

The effect of length of single‐walled carbon nanotubes (SWNTs) on electrical properties of conducting polymer–SWNT composites

DC conductivity of conjugated polymer‐single‐walled carbon nanotube (SWNT) composite films has been measured for different SWNT concentrations. The composite was prepared by dispersing SWNTs in the poly (3‐octylthiophene), P3OT matrix already dissolved in xylene. The conductivity of the composite films showed a rapid increase as the SWNT concentration increases beyond a certain value. This behavior is explained in terms of percolating paths provided by the SWNTs in the volume of polymer matrix. To investigate the effect of length of nanotubes on the percolation conductivity, different SWNT samples were employed with similar diameter but varying tube lengths. It was found that the conductivity of the composite films is strongly dominated by the length of the nanotubes. Lower percolation limit and high conductivity value of composite films is observed for longer nanotubes. Furthermore, the conductivity is observed to be dependent on the size of the host polymer molecule also. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 89–95, 2010     

Static and dynamic properties of KCN<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cl<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>

An extended three-body force shell model (ETSM) has been applied to investigate the static and dynamic properties of KCN _x Cl_1−x for the compositionx = 0.56 and 1.0 at 300 K. The phonon dispersion curves computed by us are compared with the single crystal neutron diffraction data. The unusual features of these curves are the upward curvature seen in some of the acoustic branches. This is a result ofK-dependent softening of the phonon due to translation-rotation coupling. The transverse acoustic branch is more soft near the zone centre.     

Mixed micelle behavior of poly(ethylene glycol) alkyl ethers with series of monomeric cationic, phosphonium cationic, and zwitterionic surfactant

The steady state fluorescence measurements have been carried out for the binary mixtures of poly(ethylene glycol) alkyl ethers (C _i E _j ) with series of monomeric cationic (MC), zwitterionic (ZI), and phosphonium cationic (PC) surfactants over the whole mole fraction range by using pyrene as fluorescence probe. The cmc values for all the binary mixtures, thus, determined have been further evaluated by using the regular solution theory. The various micellar parameters such as regular solution interaction parameter (β), micropolarity (I ₁/I ₃), and mean micelle aggregation number (N _agg) have been determined. A strong influence of hydrophobicity of both nonionic as well as cosurfactant (CS) components has been observed on the nature of mixed micelles. The presence of bulky head groups of PC surfactants significantly contributes towards the unfavorable mixing.     

One‐pot Regioselective Synthesis of Novel 1‐N‐Methyl‐spiro[2,3′]oxindole‐spiro[3,3″]‐1″‐N‐arylpyrrolidine‐2″,5″‐dione‐4‐arylpyrrolidines through Multicomponent 1,3‐Dipolar Cycloaddition Reaction of Azomethine Ylide

An atom economic and facile synthesis of novel dispiro–oxindole–pyrrolidines has been achieved via a three‐component tandem cycloaddition of azomethine ylide generated in situ from isatin and sarcosine by decarboxylative condensation with N‐aryl‐3‐benzylidene‐pyrrolidine‐2,5‐dione derivatives as dipolarophiles. The salient features of synthetic procedure are characterized by the mild reaction conditions, high yields, high regioselectivity and stereoselectivity, one‐pot procedure, and operational simplicity. This regioselectivity was assumed to be under the influence of π–π stacking interactions between the aromatic rings of azomethine ylide and N‐aryl‐3‐benzylidene‐pyrrolidine‐2,5‐diones that further control the exo–endo selectivity of the reaction 1,3‐dipolar cycloaddition. The regiochemistry and structures of the cycloadducts were determined with spectroscopic data.     

UV-assisted degradation of propiconazole in a TiO2 aqueous suspension: identification of transformation products and the reaction pathway using GC/MS

Photocatalytic degradation of propiconazole, a triazole pesticide, in the presence of titanium dioxide (TiO₂) under ultraviolet (UV) illumination was performed in a batch type photocatalytic reactor. A full factorial experimental design technique was used to study the main effects and the interaction effects between operational parameters in the photocatalytic degradation of propiconazole in a batch photo-reactor using the TiO₂ aqueous suspension. The effects of catalyst concentration (0.15–0.4 gL^?1), initial pH (3–9), initial concentration (5–35 mg L^?1) and light conditions were optimised at a reaction time duration of 90 min by keeping area/volume ratio constant at 0.919 cm² mL^?1. Photocatalytic oxidation of propiconazole showed 85% degradation and 76.57% mineralisation under UV light (365 nm/30 Wm^?2) at pH 6.5, initial concentration 25 mg L^?1 and constant temperature (25 ± 1 °C). The Langmuir–Hinshelwood kinetic model has successfully elucidated the effects of the initial concentration on the degradation of propiconazole and the data obtained are consistent with the available kinetic parameters. The photocatalytic transformation products of propiconazole were identified by using gas chromatography–mass spectrometry (GC/MS). The pathway of degradation obtained from mass spectral analysis shows the breakdown of transformation products into smaller hydrocarbons (m/z 28 and 39).     

Review of the preparation,characterization, and luminescence properties of Pr3+-doped CaTiO3 phosphors

Research on Chemical Intermediates - In this paper we review the luminescence properties of Pr3+-doped CaTiO3 phosphors, the different methods of sample preparation, and characterization of the...     

Studies on long lasting optical properties of Eu2+ and Dy3+ doped di-barium magnesium silicate phosphors

Di-bariummagnesium silicate phosphors doped with europiumand dysprosium were prepared under a weak reducing atmosphere. X-ray diffraction pattern of the sample was also done that confirmed the proper preparation of the phosphor. Scanning electron microscope (SEM) images confirmed that the sample has regular surface and uniform grain size distribution. Comparative studies of phosphorescence decay of Ba₂MgSi₂O₇:Eu²⁺, Dy³⁺ phosphors with different concentration of Dy³⁺ were done. The phosphor with 0.5/1.5 mol% of Eu/Dy, exhibited optimum green color afterglow properties. This emission is expected to arise due to transition of Eu²⁺ ions from any of the sublevels of 4f⁶5d¹ configuration to ⁸S_7/2 level of the 4f⁷ configuration. For a suitable trap depth, the trap concentration is expected to be proportional to the concentration of Dy³⁺. These traps are responsible for holding the charge career for a reasonable time, subsequently for increasing the time of afterglow. Hence, optimum Dy³⁺ concentration produces the longer afterglow duration with higher intensity of luminescence signals. Trap depth were also calculated using thermoluminescence glow curve which was indicative of formation of traps suitable for long afterglow.