Recent examples of the use of biocatalysts with high accessibility and availability in natural product synthesis

Utilization of biocatalysts with high accessibility and availability, which have recently been applied in the preparation of enantiomerically enriched starting materials and synthetic intermediates for natural product syntheses (mainly 2013–2017) are summarized in this review. The main contents are as follows: 1) recruitment of biocatalysts for the transformation of organic compounds; 2) special precautions for preparative-scale biocatalytic synthetic experiments; 3) asymmetric reduction of carbonyl substrates; 4) kinetic resolution of alcohol and carboxylate enantiomers; 5) desymmetrization of multifunctional alcohol and carboxylate substrates; and 6) recognition of remote and non-central chirality.     

Atmospheric pressure photoionization mass spectrometry as a tool for the investigation of the hydrolysis reaction mechanisms of phosphite antioxidants

The hydrolysis reaction mechanism of phosphite antioxidants is investigated by liquid chromatography-mass spectrometry (LC/MS). The phosphites were chosen because they differed in chemical structure and phosphorus content. Dopant assisted-atmospheric pressure photoionization (DA-APPI) is chosen as the ion source for the ionization of the compounds. In our previous work, DA-APPI was shown to offer an attractive alternative to atmospheric pressure chemical ionization (APCI) since it provided background-ion free mass spectra and higher sensitivity [M. Papanastasiou, et al., Polymer Degradation and Stability 91 (11) (2006) 2675–2682]. In positive ion mode, the molecules are generally detected in their protonated form. In negative ion mode, the phosphites are unstable and only fragment ions are observed; these however, are characteristic of each phosphite and may be used for the identification of the analytes in complex mixtures.The analytes under investigation are exposed to accelerated humid ageing conditions and their hydrolytic pathway and stability is investigated. Different substituents around the phosphorus atom are shown to have a significant effect on the stability of the phosphites, with phenol substituents producing very hydrolytically stable structures. Alkanox P24 and PEP-36 follow a similar hydrolytic pathway via the scission of the first and then the second PO_phenol bonds, eventually leading to the formation of phenol, phosphorous acid and pentaerythritol as end products. HP-10 exhibits a rather different structure and the products detected suggest scission of either the PO_hydrocarbon or one of the PO_phenol bonds. A phenomenon similar to that of autocatalysis is observed for all phosphites and is attributed to the formation of dialkyl phosphites as intermediate products.     

Dioxouranium(VI) Hydrolysis at 75 and 100 °C in 3.6 mol⋅kg<Superscript>−1</Superscript> LiClO<Subscript>4</Subscript> Aqueous Medium

This work is concerned with the acidic properties of the uranyl ion, UO₂²⁺, at 75 and 100 °C in 3.6 mol⋅kg⁻¹ LiClO₄ aqueous medium. The investigation was carried out with a coulometric-potentiometric technique. Direct and reverse acid-base titrations were carried out in order to check whether equilibrium had been reached. Moreover, in order to determine whether or not the solutions were oversaturated, a further check was carried out with fresh saturated hydrolyzed solutions.     

Degradation of floor adhesives as a function of pH

Floor adhesives on cement-based substrates may degrade if the pH is high enough and this has in many cases led to emissions of odorous substances and deteriorated indoor air quality. We have used isothermal calorimetry to assess the degradation rate of two floor adhesives as a function of pH. The rate of heat production measured by the calorimeter is proportional to the reaction rate. The degradation rate was similar for a “standard” and a “low emitting” adhesive, but the low emitting adhesive did not release volatile reaction products. The results show that adhesive degradation is strongly pH dependent. A model of alkaline hydrolysis based on two reaction sites is discussed.     

L1 β-Lactamase催化反应机理研究

用混合量子力学和分子力学(QM/MM)方法和密度泛函理论讨论了L1 β-Lactamase催化Nitrocefin水解的过程, 研究结果表明, 反应为多步反应: 第一步亲核进攻反应为反应的决速步骤, 并且伴随着酰胺键的断裂, 第二步反应为质子迁移反应. 同时讨论了金属锌在反应中的作用.     

铝锡合金制氢技术研究

采用机械球磨法制备了铝锡系列合金. 水解制氢曲线和XRD结果表明, 添加剂(锌和氢化物)的加入和球磨时间的延长, 有利于金属铝和金属锡的均匀混合和活性一致. 常温下该系列合金与水反应迅速, 氢气产量高. 尤其是球磨10 h的Al-10%Sn-5%Zn-5%MgH2(质量分数)合金, 在10 min内水解反应结束, 氢气产量为785 mL/g, 水解速率为78.5 mL/(min·g).     

Chiral Phosphoric Acid Catalyzed Asymmetric Hydrolysis of Biaryl Oxazepines for the Synthesis of Axially Chiral Biaryl Amino Phenol Derivatives

The development of catalytic asymmetric reaction with water as the reactant is challenging due to the reactivity- and stereoselectivity-control issues resulted from the low nucleophilicity and the small size of water. We disclose herein a chiral phosphoric acid (CPA) catalyzed atroposelective ring-opening reaction of biaryl oxazepines with water. A series of biaryl oxazepines undergo the CPA catalyzed asymmetric hydrolysis in a highly enantioselective manner. The key for the success of this reaction is the use of a new SPINOL-derived CPA catalyst and the high reactivity of biaryl oxazepine substrates towards water under acidic conditions. Density functional theory calculations suggest that the reaction proceeds via a dynamic kinetic resolution pathway and the CPA catalyzed addition of water to the imine group is both enantio- and rate-determining.     

基于铜离子促水解反应高灵敏电化学检测鸡肉中头孢氨苄残留

利用纳米金( AuNPs)和L-半胱氨酸( Cys)修饰金电极( AuE),得到对Cu2+具有灵敏响应的电化学修饰电极( Cys/AuNPs/AuE)。在Cu2+存在时对头孢氨苄进行水解,通过方波伏安法测定水解液中剩余Cu2+的浓度,从而间接测得头孢氨苄的含量。对金电极的修饰条件、头孢氨苄的水解条件等进行了优化。在pH 4.5的HAc-NaAc缓冲液中,头孢氨苄在Cu2+存在时于沸水浴中水解25 min后,溶液中剩余Cu2+在Cys/AuNPs/AuE上有良好的电化学响应,还原峰电流差与头孢氨苄的浓度分别在0.0058~0.12μmol/L和0.12~2.9μmol/L范围内呈良好的线性关系,检出限为1.9 nmol/L(S/N=3)。用本方法对鸡肉样品中的头孢氨苄残留进行测定,结果表明,本方法简便快速、灵敏度高,适用于鸡肉等食品样品中头孢氨苄残留的测定。     

Carbodiimide additive to control hydrolytic stability and biodegradability of PLA

Enhanced durability of bio-based polylactic acid (PLA) is one of the prerequisites to be a considered as alternative to petroleum-based polymers in long time application. The effect of bis(2,6-diisopropylphenyl)carbodiimide (BDICDI) additive in various concentration on the extent of hydrolytic stabilization and subsequent degradation kinetics of PLA was studied in the process of abiotic hydrolysis and microbial decomposition under composting conditions. The study showed that BDICDI acts as an efficient stabilizer suppressing the hydrolytic scission of ester bonds of PLA in both degradation processes tested, especially at concentrations above 1.5% w/w. Within the stabilization period which strongly depends on concentrations of BDICDI, suppression of hydrolytic degradation also triggered preservation of thermal and mechanical properties. After the period of stabilization as the dose of stabilizer is depleted, probably via reaction with water molecules and carboxylic groups, the material was hydrolyzed at a comparable or even slightly higher rate than pure PLA. By applying the appropriate amount of BDICDI, the approximate duration of stabilization could be set to suit the desired requirements of the final product.     

The effect of the migrating group structure on enantioselectivity in lipase-catalyzed kinetic resolution of 1-phenylethanol

We have studied the effects of the acyl moiety on the enantioselectivity of three lipases: Candida antarctica B, Pseudomonas cepacia and Candida cylindracea, frequently used in kinetic resolutions by acylation or hydrolysis. The size of the acyl group was examined using various enol esters during the transesterification of 1-phenylethanol and the hydrolysis of the corresponding phenylethylesters. C. antarctica-B lipase showed the highest selectivity in the transesterification of 1-phenylethanol with isopropenyl and vinyl acetate, vinyl decanoate, vinyl laurate, (E > 200). The esters 1-phenyl -ethyl-acetate, decanoate and laurate are also hydrolyzed with high selectivities (E > 150) with CAL-B. The results can be correlated to the three-dimensional form of each lipase. The effect of the migrating group on the reactivity and selectivity of the lipases are discussed for both reactions.