采用快速升温烧结方法生长Tl-1223超导薄膜的研究

报道了在铝酸镧(00l)衬底上生长Tl-1223超导薄膜的快速升温烧结方法以及铊(Tl)源陪烧靶的配比对Tl-1223薄膜晶体结构的影响.扫描电子显微镜观测表明,采用快速升温烧结方法生长的Tl-1223超导薄膜具有致密的晶体结构.X-射线衍射等测试表明,采用合适配比的陪烧靶在氩气环境下可以制备出纯c轴取向的Tl-1223超导薄膜,充氧退火后的薄膜具有较好的电学性能,其临界转变温度T_(c onset)达到116K,临界电流密度达到1.5MA/cm~2(77 K,0 T).实验结果表明,采用这一新的烧结方法制备Tl系超导薄膜具有升降温时间和恒温时间短、生产成本低等特点.     

Pairing-energy coefficients of neutron-rich fragments in spallation reactions

The ratio of pairing-energy coefficient to temperature(a_p/T)of neutron-rich fragments produced in spallation reactions has been investigated by adopting an isobaric yield ratio method deduced in the framework of a modified Fisher model.A series of spallation reactions,0.5A and 1A Ge V~(208)Pb+p,1A Ge V~(238)U+p,0.5A Ge V~(136)Xe+d,0.2A,0.5A and 1A Ge V~(136)Xe+p,and~(56)Fe+p with incident energy ranging from 0.3A to 1.5A Ge V,has been analysed.An obvious odd-even staggering is shown in the fragments with small neutron excess(I≡N-Z),and in the relatively small-A fragments which have large I.The values of a_p/T for the fragments,with I from 0 to36,have been found to be in a range from-4 to 4,and most values of a_p/T fall in the range from-1 to 1.It is suggested that a small pairing-energy coefficient should be considered in predicting the cross sections of fragments in spallation reactions.It is also concluded that the method proposed in this article is not good for fragments with A/A_s85%(where A_(s )is the mass number of the spallation system).     

钴基双金属氧化物的制备及其在电化学储能领域的应

钴基双金属氧化物MCo₂O₄（M=Ni、Zn、Mn等）既继承了单一钴金属氧化物（Co₃O₄、CoO等）高比容量的优点,又引入了新的改性金属元素用于改善其导电性差、倍率性能不佳等缺点,是一种潜在的新型电化学储能材料。本文分类介绍了NiCo₂O₄、ZnCo₂O₄、MnCo₂O₄等钴基双金属氧化物及其复合物的现有研究（包括制备方法、形貌结构、颗粒尺寸及其电化学性能）,阐述了改性手段的可能性机理,并对钴基双金属氧化物后续研究提出了一些看法。     

Investigation of neutron induced reactions on ^23Na by using Talys1.4

The neutron induced reactions on ^23Na are investigated by using the Talys1.4 program. The calculated results for the ^23Na（n, 2n）22Na reaction are found to agree with the experimental results. The cross sections of the residues of the（n, n）,（n, γ）,（n, p）, and（n, np） channels in the reactions are presented, and at the same time, the neutron induced reactions on22 Ne are also investigated.     

Investigation of neutron induced reactions on ~(23)Na by using Talys 1.4

The neutron induced reactions on23 Na are investigated by using the Talys1.4 program. The calculated results for the23Na(n, 2n)22Na reaction are found to agree with the experimental results. The cross sections of the residues of the(n, n),(n, γ),(n, p), and(n, np) channels in the reactions are presented, and at the same time, the neutron induced reactions on22 Ne are also investigated.     

New experimental measurement of natSe(n, γ) cross section between 1 eV to 1 keV at the CSNS Back-n facility

The ⁷⁴Se is one of 35 p-nuclei, and ⁸²Se is a r-process only nucleus, and their (n, γ) cross sections are vital input parameters for nuclear astrophysics reaction network calculations. The neutron capture cross section in the resonance range of isotopes and even natural selenium samples has not been measured. Prompt γ-rays originating from neutron-induced capture events were detected by four C₆D₆ liquid scintillator detectors at the Back-n facility of China Spallation Neutron Source (CSNS). The pulse height weighting technique (PHWT) was used to analyze the data in the 1 eV to 100 keV region. The deduced neutron capture cross section was compared with ENDF/B-VIII.0, JEFF-3.2, and JENDL-4.0, and some differences were found. Resonance parameters were extracted by the R-matrix code SAMMY in the 1 eV-1 keV region. All the cross sections of ^natSe and resonance parameters are given in the datasets. The datasets are openly available at http://www.doi.org/10.11922/sciencedb.j00113.00019.     

A position-sensitive detector with lithium glass and MaPMT

A position-sensitive detector is designed for neutron detection. It uses a single continuous screen of a self-made lithium glass scintillator, rather than discrete crystal implementations, coupling with a multi-anode PMT (MaPMT). The scintillator is fast and efficient; with a decay time of 34 ns and thermal neutron detection efficiency of around 95.8% for the 3 mm thick screen, and its light yield is around 5670 photons per neutron and 3768 photons per MeV γ rays deposition. The spatial resolution is around 1.6 mm (FWHM) with the energy resolution around 34.7% by using α (5.2 MeV) rays test.     

高超声速三维内收缩式进气道/乘波前体一体化设计研究评述

论述了国内外在高超声速三维内收缩式进气道研究方面的最新研究动态,重点阐述了三维变截面内乘波式进气道的研究进展.介绍了常规矩形进口进气道与乘波体外形一体化相关研究,并对三维内收缩式进气道与前体的一体化问题提出了关注. 最后,对高超声速进气道与前体一体化设计的研究趋势进行了展望,提出三维内收缩式进气道与乘波前体的``双乘波'一体化设计可能为高超声速研究带来新的变革.      

高温高压生长宝石级金刚石单晶的表面特征研究

本文利用高温高压温度梯度法,NiMnCo合金作为触媒,分别采用籽晶{100}和{111}作为生长面,合成了Ib型宝石级金刚石单晶,对其表面特征进行了分析和讨论.结果发现,宝石级金刚石单晶的表面特征不具有唯一性,多数情况下,晶体{111}面明显较{100}面平整,而且{100}面生长台阶的棱角不清晰,经常会出现经触媒融融过的痕迹,并且这种现象的出现跟籽晶生长面不同和合成温度条件高低无关;{111}面有时也会出现明显的生长台阶,棱角清晰,并且形状较为规则.宝石级金刚石晶体表面特征的不唯一性说明晶体表面特征对生长条件稳定性有更高的要求.     

CeO_2缓冲层热处理对Tl-2212薄膜超导特性的影响

本文采用原子力显微镜(AFM)和XRD研究了生长在蓝宝石(11-02)基片上的CeO_2缓冲层在不同的退火温度和退火时间下表面形貌和相结构的变化,以及对Tl-2212薄膜超导特性的影响.AFM和XRD研究表明,CeO_2薄膜在流动氧环境中退火,表面形貌发生显著的变化;CeO_2薄膜在最佳条件下退火后,可获得原子级光滑表面,结晶质量明显提高.实验结果表明,缓冲层的结晶质量和表面粗糙度与Tl-2212薄膜的超导特性密切相关.在经过最佳条件退火后的CeO_2缓冲层上制备了厚度为500 nm无裂纹的Tl-2212超导薄膜,其临界转变温度(T_c)达到107 K,液氮温度下临界电流密度(J_c)为3.9 MA/cm~2(77 K,0 T),微波表面电阻(R_s)约为281 μΩ(77 K,10 GHz).