Determination of the time resolution for neutron scintillation detectors by multi-coincidence measurement

Based on the multi-coincidence measurement, the time resolution of three liquid scintillation detectors (BC501A) were determined strictly by solving the coincidence equations, where the influence from electronics estimated by self coincidence measurement as well as the background had been considered. The result of this work agreed well with the result that was deduced from the traditional method, and it will be helpful to analyze the energy resolution of neutron time of flight spectra measured by using such detectors at CIAE (China Institute of Atomic Energy).     

离子色谱法同时测定大气可吸入颗粒物PM10中14种水溶性离子

采用离子色谱法同时测定了大气可吸入颗粒物PM10中的多种水溶性阴阳离子。样品采用超纯水超声萃取各种水溶性离子,优化的萃取溶液体积为40mL,萃取时间为15 min,萃取液用0.45μm纤维滤膜过滤,阴、阳离子分别采用响应的离子色谱柱分离,流动相分别采用3.6 mmol/L Na2CO3溶液+0.6 mmol/L NaHCO3溶液,2 mmol/L HNO3溶液,其中阳离子检测未使用抑制器,电导检测器检测。14种离子在一定浓度范围内线性关系良好,相关系数r都>0.999,F-,BrO3-,Cl-,NO2-,Br-,NO3-,PO42-,SO42-等8种阴离子的检出限分别为1.5,7.5,1.6,4.2,6.5,12.5,10.4,3.3μg/L,Li+,NH4+,Na+,K+,Mg2+,Ca2+等6种阳离子的检出限分别为4.6,12.3,8.5,19.8,12.4,17.9μg/L,平均回收率为92.3%~99.7%,标准偏差小于5%。方法适用于同时测定PM10中的多种水溶性离子。     

RP-HPLC法测定QOA的含量及有关物质

建立了测定QOA含量及有关物质的RP-HPLC方法。采用Sepax C18(4.6 mm×250 mm,5μm)色谱柱,流动相为乙腈与体积分数0.1%乙酸水溶液(体积比为10:90),流速1.0 m L/min,检测波长241 nm,进样体积为20μL。QOA质量色谱峰与其相邻杂质峰能完全分离,QOA质量浓度在0.5~50μg/m L范围内呈良好的线性关系(A=48387ρ-736.4,γ=0.9999),检出限为10 ng/m L(S/N≥3)。方法 RSD为0.45%,重复性试验RSD为0.37%,稳定性试验RSD为0.21%。     

微流控芯片非接触电导法测定注射液中的门冬氨酸鸟氨酸

建立了微流控芯片非接触电导检测法快速分离检测门冬氨酸鸟氨酸注射液中门冬氨酸鸟氨酸的分析方法。考察了缓冲溶液的种类和浓度、添加剂、进样时间、分离电压等因素对分离检测的影响。在优化条件下,即以4 mmol/L M ES-6 mmol/L(L)-His(p H 4.5)为缓冲溶液,分离电压2.00 k V、进样时间10 s,1 min内可实现较好的分离和检测,门冬氨酸鸟氨酸的线性范围为20~200μg/m L,相关系数为0.9990,检出限(S/N=3)为10.0μg/m L,RSD为1.9%,加标回收率为97.6%~101.3%。方法可用于门冬氨酸鸟氨酸的质量控制。     

UPLC法测定苹果中4种新型植物生长调节剂农药残留

采用固相萃取反相液相色谱法对苹果中4种新型植物生长调节剂残留量进行分离分析。方法回收率在90.1%~95.2%范围内,相对标准偏差范围为1.1%~2.4%。对氯苯氧乙酸、5-硝基愈创木酚钠、噻苯隆和氯吡脲的方法检出限分别为0.5,0.5,0.5,0.2 mg/kg。方法可实现此4种植物生长调节剂残留的定量测定。     

二异丁腈肼溶液中氮的选择性测定

二异丁腈肼分子结构中含有连氮(-N-N-)和氰基氮(-CN),每一个分子中有4个N原子,其结构式见图1。油溶性偶氮引发剂偶氮二异丁腈是重要的化工原料,广泛用于高分子的研究和生产,可作为氯乙烯、乙酸乙烯和丙烯腈等单体聚合引发剂,也可用作聚氯乙烯、聚烯烃、聚氨酯、聚乙烯醇、丙烯腈与丁二烯、苯乙烯共聚物等的发泡剂。此外,也可用于其它有机合成。偶氮二异丁腈由氯气氧化二异丁腈肼而制得,这开发了偶氮二异丁腈生产的新工艺,达到清     

直读光谱法测定实芯焊丝的操作技巧

石油化工压力容器制造过程中使用大量的合金焊接金属材料,其中实芯焊丝占70%以上,直径为1~5mm的焊丝占95%。焊接金属材料实芯焊丝长期用化学湿法分析进行测试,很难满足现代生产对分析效率的要求。直读光谱法测试速度快、准确度较高,能满足快速分析的生产要求。直读光谱法对所测样品有一定的要求[1-2],样品尺寸表面为25mm×25mm,厚度大于5mm,最小表面直径为16mm,高度在5~25mm之间。工厂压力容器制     

Simultaneous determination of dihydroxybenzene isomers utilizing a thiadiazole film electrode

The present study reports a sensitive electro-analytical method for the simultaneous determination of dihydroxybenzene isomers by using a thiadiazole film electrode, which was readily prepared by electropolymerization of 2,5-dimercapto-1,3,4-thiadiazole on a glassy carbon electrode with cyclic voltammetry. The functionalized electrode has a distinguishable and sensitive response to dihydroxybenzene isomers. Under the optimized conditions, the linear stripping peak currents showed good linear relationships with hydroquinone, catechol and resorcinol at concentration ranges 0.50-120, 0.50-110 and 1.00-110 μmol/L, and the detection limits are 0.1, 0.1 and 0.3 μmol/L, respectively. The proposed method is applicable to the simultaneous determination of dihydroxybenzene isomers in real samples with the relative standard deviations of less than 5.7% and the recovery rates of 95.6%-106%. The constructed electrode is characterized by simple preparation, good selectivity, and high sensitivity advantages.     

Electrochemical sensor based on f-SWCNT and carboxylic group functionalized PEDOT for the sensitive determination of bisphenol A

A simple,sensitive,and reliable method for the voltammetric determination of bisphenol A(BPA) by using carboxylic group functionalized single-walled carbon nanotubes(f-SWCNT)/carboxylic-functionalized poly(3,4-ethylenedioxythiophene)(PC4) complex modified glassy carbon electrode(GCE) has been successfully developed.The electrochemical behavior of BPA at the surface of the modified electrode is investigated by electrochemical techniques.The cyclic voltammetry results show that the as-prepared electrode exhibits strong catalytic activity toward the oxidation of BPA with a well-defined anodic peak at 0.623 V in PBS(0.1 mol/L,pH 7.0).The surface morphology of the 3D network of composite film is beneficial for the adsorption of analytes.Under the optimized conditions,the oxidation peak current is proportional to BPA concentration in the range between 0.099 and 5.794 μmol/L(R~2 = 0.9989),with a limit of detection of 0.032 μmol/L(S/N = 3).The enhanced performance of the sensor can be attributed to the excellent electrocatalytic property of/-SWCNT and the extraordinary conductivity of PC4.Furthermore,the proposed modified electrode displays high stability and good reproducibility.The good result on the voltammetric determination of BPA also indicates that the asfabricated modified electrode will be a good candidate for the electrochemical determination and analysis of BPA.