用于谷胱甘肽检测的新型罗丹明衍生物荧光探针EI北大核心CSCD

合成了一种反应型近红外荧光探针N-Rh-GSH,该探针以罗丹明衍生物为荧光母体,通过与谷胱甘肽(GSH)作用触发螺环的开关来实现信号的响应,其开环释放的荧光产物具有760 nm的近红外发射波长。细胞实验表明,该探针可实现对活细胞中GSH的成像。     

基于大科学装置的空间金属组学和单细胞/单颗粒金属组学

金属组学是综合研究生命体内（(特别是细胞内）)自由或络合的全部金属原子的分布、含量、化学种态及其功能的一门学科,而大科学装置为金属组学研究提供了强有力的工具。本综述本文首先介绍了金属组学发展简史,然后介绍了基于大科学装置的同步辐射技术、中子技术、质子技术及缪子技术等,最后概述了基于大科学装置的空间金属组学、单细胞/单颗粒金属组学的应用示例。基于大科学装置的中子活化技术（NAA）NAA、X-射线荧光光谱（XRF）以及质子激发X射线谱（PIXE ）等技术是开展非原位空间金属组学研究的有力手段,而XRF、PIXE以及缪子X射线荧光谱（MXA）为开展原位空间金属组学提供了有力工具,特别是基于XRF的技术,其空间分辨率可低至10 nm级别,是开展原位单细胞/单颗粒金属组学的利器。 新一代同步辐射光源、质子源及缪子源将为空间金属组学、特别是时空金属组学研究提供更强有力工具。     

有机催化吲哚碳环上的不对称Friedel⁃Crafts烷基化反应

将金鸡纳碱衍生物双功能催化剂用于有机催化羟基吲哚与靛红的不对称Friedel-Crafts反应, 筛选出最佳反应条件: 催化剂为5%(摩尔分数)6′-脱甲基奎尼丁(1b), 溶剂为四氢呋喃, 反应温度 0 ℃. 以67%~91%的产率和最高达97%的对映选择性获得了苯环上取代的羟基烷基化产品. 拓宽了该反应的催化剂类型和底物范围.     

基于磁响应光子晶体与量子点的多重变色防伪研究

结合Fe₃O₄@SiO₂ (M)超顺磁胶体粒子动态连续的磁致变色和碲化镉量子点(CdTe QDs)瞬时发射的光致发光特性, 采用聚二甲基硅氧烷(PDMS)弹性体封装含有M胶体粒子和CdTe QDs的乙二醇(EG)微液滴, 制得了具有多重变色功能的M/QDs/EG/PDMS复合薄膜. 利用光学显微镜、光纤光谱仪、荧光光谱仪、数码相机、拉力试验机对复合薄膜的内部结构、光学性质及力学性能进行表征. 结果表明, 在外界磁场的诱导下, 复合薄膜瞬时呈现明亮的结构色, 且随着磁场强度的降低, 复合薄膜的衍射波长发生连续红移, 移动范围可达145 nm. 此外, 在紫外光的激发下, 复合薄膜可呈现特定波长的荧光发射, 具备良好的光致发光特性. 同时, 复合薄膜断裂伸长率可达132%, 表现出良好的弹性, 这为其附着在不同材料表面实现防伪应用提供了基础. 进一步地, 通过图案化设计, 可制得响应变色迅速、图案隐现可逆、颜色变化多样的防伪薄膜, 这有利于其在信息加密和高级别防伪领域中的应用.     

Determination of copper(II) based on its inhibitory effect on the cathodic electrochemiluminescence of lucigenin

A simple method is described for the determination of copper(II) ions based on the cathodic electrochemiluminescence (ECL) of lucigenin which is quenched by Cu(II). The blue ECL is best induced at ?0.45 V (vs. Ag/AgCl) at a scan rate of 50 mV·s^?1. Under optimum conditions, the calibration plot is linear in the 3.0 to 1000 nM Cu(II) concentration range. The limit of detection is 2.1 nM at a signal-to-noise ratio of 3. Compared to other analytical methods, the one presented here is simple, fast, selective and cost-effective. It has been successfully applied in the analysis of copper ions in spiked tap water samples with recoveries ranging from 93.0% (at 50 nM concentration) to 105.7% (at 150 nM).

Open image in new window

Graphical abstract The inhibitory effect of Cu(II) on the cathodic electrochemiluminescence of lucigenin enables determination of Cu(II) with a 2.1 nM detection limit.

     

Lead-free Perovskite Materials (NH4)3Sb2IxBr9−x

A family of perovskite light absorbers (NH₄)₃Sb₂I_xBr_9−x (0≤x≤9) was prepared. These materials show good solubility in ethanol, a low-cost, hypotoxic, and environmentally friendly solvent. The light absorption of (NH₄)₃Sb₂I_xBr_9−x films can be tuned by adjusting I and Br content. The absorption onset for (NH₄)₃Sb₂I_xBr_9−x films changes from 558 nm to 453 nm as x changes from 9 to 0. (NH₄)₃Sb₂I₉ single crystals were prepared, exhibiting a hole mobility of 4.8 cm² V⁻¹ s⁻¹ and an electron mobility of 12.3 cm² V⁻¹ s⁻¹. (NH₄)₃Sb₂I₉ solar cells gave an open-circuit voltage of 1.03 V and a power conversion efficiency of 0.51 %.     

Adjoint sensitivity analysis of kinetic,thermochemical, and transport data of nitrogen and ammonia chemistry

Many studies apply sensitivity analysis to explore the impact of reaction kinetic parameters on model predictions. The importance of thermochemical and transport data is often assumed to be relatively low. While this is true for specific combustion properties of hydrocarbons, the role of thermochemical and transport data in combustion processes of nitrogen-containing molecules remains to be investigated. Thus, this work applies adjoint sensitivity analysis to the complete set of parameters in combustion models, i.e., kinetics, thermodynamics, and transport data. This integral approach increases the number of parameters considered in the sensitivity analysis drastically. Compared to forward sensitivity analysis, the adjoint approach is very efficient for a large number of parameters, and analysis with several thousand parameters can be performed in seconds. Nitrogen oxide formation in methane/air flames and laminar burning velocities of ammonia/air flames are considered as prediction targets. Sensitivity analysis results for kinetic, thermochemical, and transport data are compared by jointly considering all appearing parameter uncertainties. The comparison reveals that, due to their importance for the equilibrium constants of elementary reactions, the optimization potential of thermodynamic properties is often similarly high as that of the kinetics parameters. Transport parameters are found to be of the lowest priority for the model development due to their low uncertainties, even though high sensitivities are determined for several of them. More specifically, the analysis for the laminar burning velocities of ammonia/air flames reveals a high optimization potential for parameters in the N₂-amine chemistry, including the molar heat capacities of N₂H₂, N₂H₃, and NH. Interestingly, analyses with different mechanisms reveal strongly diverging results, especially regarding the importance of reactions with OH, which is uncommon when considering the combustion of hydrocarbons.     

Ternary blends based on poly (ethylene-naphthalate)/glass fibers/nitrile rubber: Preparation,properties and effect of dynamic vulcanization

This work studied the possibility of utilizing nitrile rubber (NBR) to modify the impact properties of poly (ethylene-naphthalate) (PEN). The PEN/NBR ratio used changed from 100/0 to 60/40. At the same time, glass fibers (GF), 40% weight of the PEN component, were used to reinforce the blends to compensate for the loss of mechanical properties of PEN by incorporation of NBR. The results showed that the impact strength of the PEN/GF/NBR blend (PEN/NBR = 60/40) was increased up to 27.6J/m, nearly 5 times higher than that of the neat PEN. Meanwhile, the tensile strength and flexural strength were still maintained at as high as 66.1 MPa and 98.2 MPa, respectively. Dynamic vulcanization further improved the mechanical properties of the PEN/GF/NBR blends, which provided routes to the design of new PEN/elastomer blends. Other properties of the PEN/GF/NBR blends were also investigated in terms of morphology of fractured surface, dynamic mechanical behavior, thermal stability and crystallization, by scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), thermo-gravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively.     

First Total Syntheses of 4′-0-Geranylisoliquiritigenin And 4′-O-Geranylnarigenin

The title compounds, 4'-0-geranylisoliquiritigenin and 4'-0-geranylnaringenin isolated from Millettia ferruginea and Borania coerulescens respectively, were first synthesized starting from geranyl bromide, 4-hydroxybenzaldehyde and O-hydroxy acetophenones by the condensation reaction and demethoxymethylation as key steps.     

基于LabVIEW的惯性测量单元信号采集及处理系统设计

利用LabVIEW设计了惯性测量单元信号采集及处理软件,主要包括串口通信、数据分离及信号处理等模块;串口通信模块采用VISA方式编程,建立了惯性测量单元与上位机之间的通信;根据惯性测量单元输出数据的格式,利用LabVIEW中的匹配模式函数分离出沿三轴向的加速度信号和角速率信号;设计了一种用于去除加速度信号中低频成份的数字滤波器;在建立的陀螺漂移模型基础上,分别进行小波基、小波分解层数、阈值函数及阈值估计方法等小波参数的选取.