福建物构所在锂离子电池正极材料研究获新进展

<正>兼具高容量和高倍率特性的正极材料是国际锂离子电池材料研究的热点,是满足未来移动电子设备及动力汽车产业对锂离子电池能量密度和功率密度要求的关键材料。迄今为止,所有报道的锂离子电池正极材料都难以同时兼具高容量和高倍率两个特性。在科技部973计划、国家自然科学基金项目的支持下,福建物构所中科院光电材料化学与物理重点实验室李莉萍研究小组通过结构设计和合成方法创新,利用溶剂热合成前驱体的方法并结合高温烧结方法,成功     

膜流动电位测试中Ag-AgCl电极的制备及稳定性研究

膜的动电特性研究中,往往采用流动电位方法。该方法中,Ag-Ag Cl测试电极的质量是影响测试准确性的关键要素。本文采用正交试验设计和方差分析,着重考察电解法制备Ag-Ag Cl电极过程中,电流强度(I)、氯化时间(t)、电解质溶液浓度(CHCl)、电极来源(n)、烘烤温度(T)、活化电极溶液浓度(CKCl)等因素对Ag-Ag Cl电极稳定性的影响。得到Ag-Ag Cl电极的最优制备参数为:电流密度3.0m A/cm2,氯化时间50min,盐酸浓度0.1mol·L-1,烘烤温度120℃,活化电极溶液(KCl)浓度0.001mol·L-1;最显著影响因素为电极来源,显著影响因素为氯化时间和烘烤温度。对最优条件组合下制备的AgAg Cl电极,进行了稳定性实验,结果表明:制备的电极具有较好的稳定性,24h内电极电位漂移量小于0.10mv,7天内电极电位漂移量小于0.2mv;在聚偏氟乙烯中空纤维超滤膜流动电位测试中,流动电位与流动压差具有良好的线性和可重复性,回归曲线R20.99,变化规律符合Helmholtz-Smoluehowski公式,可以较好满足膜的流动电位测试要求。     

A filter method for nonlinear semidefinite programming with global convergence

In this study, a new filter algorithm is presented for solving the nonlinear semidefinite programming. This algorithm is inspired by the classical sequential quadratic programming method. Unlike the traditional filter methods, the sufficient descent is ensured by changing the step size instead of the trust region radius. Under some suitable conditions, the global convergence is obtained. In the end, some numerical experiments are given to show that the algorithm is effective.     

Modeling method and preliminary model of Asteroid Toutatis from Chang’E-2 optical images

Shape modeling is fundamental to the analysis of dynamic environment and motion around asteroid. Chang＇E- 2 successfully made a flyby of Asteroid 4179 Toutatis and obtained plenty of high-resolution images during the mis- sion. In this paper, the modeling method and preliminary model of Asteroid Toutatis are discussed. First, the optical images obtained by Chang＇E-2 are analyzed. Terrain and silhouette features in images are described. Then, the modeling method based on previous radar model and preliminary information from optical images is proposed. A preliminary polyhedron model of Asteroid Toutatis is established. Finally, the spherical harmonic coefficients of Asteroid Toutatis based on the polyhedron model are obtained. Some parameters of model are analyzed and compared. Although the model proposed in this paper is only a preliminary model, this work offers a valuable reference for future high-resolution models.     

一种一致性排序标度方法

针对层次分析法判断矩阵一致性问题,提出了一种新的排序标度方法,证明了采用新方法形成的判断矩阵具有一致性,最后通过实例运用说明了此方法的可行性和有效性.     

立体几何问题解决中的转化方法

在研究立体几何的问题时，我们发现很多问题都需要转化成平面几何的问题，本文中我们结合北京近几年的几道考题，来谈谈如何进行转化．     

Surface integral analogy approaches for predicting noise from 3D high-lift low-noise wings

Three surface integral approaches of the acoustic analogies are studied to predict the noise from three concep- tual configurations of three-dimensional high-lift low-noise wings. The approaches refer to the Kirchhoff method, the Ffowcs Williams and Hawkings （FW-H） method of the permeable integral surface and the Curle method that is known as a special case of the FW-H method. The first two approaches are used to compute the noise generated by the core flow region where the energetic structures exist. The last approach is adopted to predict the noise specially from the pressure perturbation on the wall. A new way to con- struct the integral surface that encloses the core region is proposed for the first two methods. Considering the local properties of the flow around the complex object-the actual wing with high-lift devices-the integral surface based on the vorticity is constructed to follow the flow structures. The surface location is discussed for the Kirchhoff method and the FW-H method because a common surface is used for them. The noise from the core flow region is studied on the basis of the dependent integral quantities, which are indicated by the Kirchhoff formulation and by the FW-H formulation. The role of each wall component on noise contribution is analyzed using the Curle formulation. Effects of the volume integral terms of Lighthill＇s stress tensors on the noise pre-diction are then evaluated by comparing the results of the Curle method with the other two methods.     

A DFT study of CO<Subscript>2</Subscript> electrochemical reduction on Pb(211) and Sn(112)

Electrochemical reduction of CO2 has the benefit of turning greenhouse gas emissions into useful resources. We performed a comparative study of the electrochemical reduction of CO2 on stepped Pb(211) and Sn(112) surfaces based on the results of density functional theory slab calculations. We mapped out the potential energy profiles for electrochemical reduction of CO2 to formate and other possible products on both surfaces. Our results show that the first step is the formation of the adsorbed formate(HCOO*) species through an Eley-Rideal mechanism. The formate species can be reduced to HCOO- through a oneelectron reduction in basic solution, which produces formic acid as the predominant product. The respective potentials of forming HCOO* are predicted to be -0.72 and -0.58 V on Pb and Sn. Higher overpotentials make other reaction pathways accessible, leading to different products. On Sn(112), CO and CH4 can be generated at -0.65 V following formate formation. In contrast, the limiting potential to access alternative reaction channels on Pb(211) is -1.33 V, significantly higher than that of Sn.     

M-矩阵线性互补问题模系多分裂迭代方法的收敛性

首先证明了M-矩阵的H-相容分裂都是正则分裂,反之不成立.这表明对于M-矩阵而言,其正则分裂包含H-相容分裂.然后针对系数矩阵为M-矩阵的线性互补问题,建立了两个收敛定理:一是模系多分裂迭代方法关于正则分裂的收敛定理;二是模系二级多分裂迭代方法关于外迭代为正则分裂和内迭代为弱正则分裂的收敛定理.