膜流动电位测试中Ag-AgCl电极的制备及稳定性研究

膜的动电特性研究中,往往采用流动电位方法。该方法中,Ag-Ag Cl测试电极的质量是影响测试准确性的关键要素。本文采用正交试验设计和方差分析,着重考察电解法制备Ag-Ag Cl电极过程中,电流强度(I)、氯化时间(t)、电解质溶液浓度(CHCl)、电极来源(n)、烘烤温度(T)、活化电极溶液浓度(CKCl)等因素对Ag-Ag Cl电极稳定性的影响。得到Ag-Ag Cl电极的最优制备参数为:电流密度3.0m A/cm2,氯化时间50min,盐酸浓度0.1mol·L-1,烘烤温度120℃,活化电极溶液(KCl)浓度0.001mol·L-1;最显著影响因素为电极来源,显著影响因素为氯化时间和烘烤温度。对最优条件组合下制备的AgAg Cl电极,进行了稳定性实验,结果表明:制备的电极具有较好的稳定性,24h内电极电位漂移量小于0.10mv,7天内电极电位漂移量小于0.2mv;在聚偏氟乙烯中空纤维超滤膜流动电位测试中,流动电位与流动压差具有良好的线性和可重复性,回归曲线R20.99,变化规律符合Helmholtz-Smoluehowski公式,可以较好满足膜的流动电位测试要求。     

A sign-function receiving scheme for sine signals enhanced by stochastic resonance

To address the problem that it is difficult to detect an intermediate frequency (IF) signal at the receiving end of a communication system under extremely low signal-to-noise ratio (SNR) conditions, we propose a stochastic resonance (SR)-enhanced sine-signal detection method based on the sign function. By analyzing the SR mechanism of the sine signal and combining it with the characteristics of a dual-sequence frequency-hopping (DSFH) receiver, a periodic stationary solution of the Fokker-Planck equation (FPE) with a time parameter is obtained. The extreme point of the sine signal is selected as the decision time, and the force law of the electromagnetic particles is analyzed. A receiving structure based on the sign function is proposed to maximize the output difference of the system, and the value condition of the sign function is determined. In order to further improve the detection performance, in combination with the central-limit theorem, the sampling points are averaged N times, and the signal-detection problem is transformed into a hypothesis-testing problem under a Gaussian distribution. The theoretical analysis and simulation experiment results confirm that when N is 100 and the SNR is greater than 20 dB, the bit-error ratio (BER) is less than 1.5×10^-2 under conditions in which the signal conforms to the optimal SR parameters.