Effect of defects on the electronic structure of a PbI2/MoS2 van der Waals heterostructure: A first-principles study

PbI2/MoS2,as a typical van der Waals(vdW)heterostructure,has attracted intensive attention owing to its remarkable electronic and optoelectronic properties.In this work,the effect of defects on the electronic structures of a PbI2/MoS2 heterointerface has been systematically investigated.The manner in which the defects modulate the band structure of PbI2/MoS2,including the band gap,band edge,band alignment,and defect energy-level density within the band gap is discussed herein.It is shown that sulfur defects tune the band gaps,iodine defects shift the positions of the band edge and Fermi level,and lead defects realize the conversions between the straddling-gap band alignment and valence-band-aligned gap,thus enhancing the light-absorption ability of the material.     

Advances in high carbon dioxide separation performance of poly(ethylene oxide)-based membranes

Poly(ethylene-oxide)(PEO)-based membranes have attracted much attention recently for CO2 separation because CO2 is highly soluble into PEO and shows high selectivity over other gases such as CH4 and N2.Unfortunately,those membranes are not strong enough mechanically and highly crystalline,which hinders their broader applications for separation membranes.In this review discussions are made,as much in detail as possible,on the strategies to improve gas separation performance of PEO-based membranes.Some of techniques such as synthesis of graft copolymers that contain PEO,cross-linking of polymers and blending with long chains polymers contributed significantly to improvement of membrane.Incorporation of ionic liquids/nanoparticles has also been found effective.However,surface modification of nanoparticles has been done chemically or physically to enhance their compatibility with polymer matrix.As a result of all such efforts,an excellent performance,i.e.,CO2 permeability up to 200 Barrer,CO2/N2 selectivity up to 200 and CO2/CH4 selectivity up to 70,could be achieved.Another method is to introduce functional groups into PEO-based polymers which boosted CO2 permeability up to 200 Barrer with CO2/CH4 selectivity between 40 and 50.The CO2 permeability of PEO-based membranes increases,without much change in selectivity,when the length of ethylene oxide is increased.     

基于双状态Χ~2检测和快速强跟踪AUKF的组合导航算法

针对GNSS/SINS/摄影测量组合导航中某个子系统发生故障时,整个导航系统易受到故障数据污染的问题,提出了一种基于快速强跟踪AUKF的双状态卡方(Χ~2)检测数据融合方法。首先,采用快速强跟踪AUKF算法进行滤波;然后,引入卡方检验通过检测UKF子滤波器输出的状态向量来定位故障参数;最后,采用强跟踪滤波准确跟踪状态矢量突变以增强系统鲁棒性,并根据自适应因子实时调整预测协方差阵以修正增益矩阵,使滤波结果不受异常信息的干扰。将提出的改进算法与常规算法分别应用于无人机着陆导航系统,结果显示:与传统UKF相比,提出的算法得到的位置误差减少了62.6%以上;与强跟踪UKF相比,导航误差也至少减小了32.6%。     

地表高程对大气CO2反演的影响

从大气辐射传输模型正演和反演两个角度,探究CO_2观测时地表高程的敏感性。SRTM地表高程数据表明,在北京附近的平原地区,卫星指向不准导致的地表高程均值的误差较小,在偏移量为0.1～10.0km的情况下,误差极大值约为10m;而在北京附近山区以及平原与山区交界区内,地表高程均值的误差较大,误差极大值分别为713.98,515.61m。CO_2反演结果表明:高程值每变化100m,CO_2柱浓度偏差为3.29×10~(-6);在大气CO_2高精度反演中,地表高程偏差是一个关键因素。     

基采用时频区域检测的雷达信号盲分选算法

为了解决欠定条件下密集雷达信号分选问题,提高雷达信号盲分选算法精度,提出了一种采用时频区域检测的雷达信号盲分选算法,首先利用短时傅立叶变换将混合信号映射至时频平面进行处理,然后通过聚类算法估计出混合矩阵,从而反解出源信号矩阵,进而估计出每一雷达源信号,能够在信号的时频平面投影相交且欠定的条件下,实现信号分选功能.仿真实验结果表明:提出的算法相比于传统的类MUSIC算法及其衍生的相关改进算法具有更高的分选精度和算法收敛性,且估计得到的源信号时域波形更优,体现了其有效性和优越性.     

σ2 Hessian方程的Pogorelov型C2 内估计及应用

提出利用拉格朗日乘子法重新证明σ2算子的最优凹性,并定义了一个凸锥Γ3?=λ=(λ1,λ2,?,λn)∈Rn:σ1(λ)>0,σ2(λ|i)>0,1≤i≤n。利用σ2算子的最优凹性，给出了σ2Hessian方程Pogorelov型C2内估计，进而证明了σ2(D2u(x))=1,x∈Rn的满足二次多项式增长条件的Γ3?-凸整解为二次多项式。     

AR(2)模型自相关函数计算公式的回顾

本文基于AR(2)模型的Yule-Walker方程组,利用二阶线性常系数递推关系的一般理论,导出了AR(2)过程自相关函数计算公式.     

Er3+单掺、Er3+/Yb3+共掺杂Ca12Al14O32F2的 制备及上转换发光性质

利用高温固相法成功制备了Er~(3+)单掺、Er~(3+)/Yb~(3+)共掺杂Ca_(12)Al_(14)O_(32)F_2上转换发光样品。在980 nm激光激发下,Er~(3+)单掺和Er~(3+)/Yb~(3+)共掺杂样品均呈现出较强的绿光(528,549 nm)和较弱的红光(655 nm)发射,分别归因于Er~(3+)离子的~2H_(11/2),~4S_(3/2)→~4I_(15/2)和~4F_(9/2)→~4I_(15/2)能级跃迁。随着Er离子浓度的增加,单掺杂样品上转换发光强度先增大后减小,最佳掺杂浓度为0.8%。共掺杂Yb~(3+)后,Er~(3+)的发光强度明显增大。还原气氛下合成的样品上转换发光强度增大约两倍,可能和笼中阴离子基团变化有关。发光强度和激发光功率的关系表明所得上转换发射为双光子吸收过程,借助Er~(3+)-Yb~(3+)体系能级结构详细讨论了上转换发射的跃迁机制。