单端泵浦光纤放大器获得4 kW单模窄谱激光输出

窄谱光纤激光器在光束合成等领域有着广泛的应用,然而模式不稳定效应的出现严重限制着窄谱光纤激光器的功率提升。提出并验证了采用新型981 nm稳波长泵浦方案,能够应用于窄谱激光放大并提升模式不稳定效应阈值,通过采用单端后向泵浦结构,将单模窄谱光纤放大器功率提至4 kW以上。实验中采用白噪声相位调制展宽单频激光作为窄谱种子,主放大级分别采用稳波长976 nm和981 nm两种泵浦源单端后向泵浦。在采用976 nm泵浦源泵浦时,窄谱激光最高放大至3.4 kW,出现典型的模式不稳定效应特征,功率提升受到限制。在采用981 nm泵浦源泵浦时,窄谱激光最高放大至4.05 kW,且并未出现模式不稳定效应,输出光束质量M2因子为1.3,进一步功率提升仅受限于泵浦功率。通过优化激光器设计、结合双向泵浦结构,有望实现更高功率的窄谱光纤激光输出。     

基于动态磁聚焦的CT球管飞焦点研究

作为CT设备的核心器件,CT球管采用动态磁聚焦技术以利于大电流输出时小焦点的实现。飞焦点技术可以多角度记录每次扫描的每个投影,提高采样率,从而大幅改善图像清晰度,提高成像质量。当CT球管为1 A大电流输出时,采用CST软件对双磁四极透镜关键参数进行模拟仿真及优化,满足焦点目标尺寸为0.2 mm×0.6 mm的同时具备飞焦点功能。     

基于周期极化化学计量比掺氧化镁钽酸锂晶体的高效率、单程、连续外腔倍频

利用长度为20mm的周期极化化学计量比掺氧化镁钽酸锂晶体（PP-MgO: SLT），实现了转换效率为11.8%的单程连续外腔准相位匹配（QPM）倍频，此时1064nm基频光的输入功率为7.69W，获得的532nm倍频光的输出功率为905mW。实验中可以发现，在不同的基频光聚焦条件和输入功率下，对应最大倍频输出的晶体温控炉的设定温度也要随之改变。此外，对允许角和允许温度也进行了研究，实验结果和理论结果符合的很好。     

Experimental 511 W Composite Nd：YAG Ceramic Laser

We demonstrate a 511 W laser diode pumped composite Nd：YAG ceramic laser. The optical pumping system is consisted of five laser diode stacked arrays arranged in a pentagonal shape around the ceramic rod whose size is φ6.35×144mm. When the pumping power is 1600 W, the cw laser output up to 511 W at 1064nm can be obtained with a linear piano-piano cavity, and the optical-to-optical efficiency is 31.9%. To our knowledge, this is the highest value of laser output by using a newly invented composite Nd：YAG ceramic rod as the gain medium.     

Light-Gradient-Induced Spiral Wave Drifts in a Belousov-Zhabotinsky Reaction

The dynamic behaviour of spiral tip in the light-sensitive Belousov-Zhabotinsky reaction under the influence of an externally applied light gradient was experimentally studied. The gradient causes different drifts for different spiral patterns. The centre of the spiral wave moved toward the region of lower light intensity. The direction of an additional perpendicular drift depended on the chirality of the spiral wave. The dependences of the drifting angle and the drifting velocity on light gradient have been measured.     

High-Average-Power Nanosecond Quasi-Phase-Matched Single-Pass Optical Parametric Generator in Periodically Poled Lithium Niobate

A pulsed nanosecond optical parametric generator (OPG) in periodically poled lithium niobate (PPLN) crysal is presented. The pump laser is an acousto-optically Q-switched Nd:YVO4 laser with the maximum average power of 6.58 W. When the repetition rate is 50kHz and the pulse width of the pump source is 80ns, the maximum average total output power of the single-pass PPLN OPG is about 1.9 W, which includes 1.322 W of 1.536μm signal radiation. The length of the PPLN crystal is only 38.7mm (at room temperature) with a grating period of 28.93μm (at room temperature). The 1.502-1.536μm signal radiation and 3.652-3.465μm idler radiation are obtained by adjusting the PPLN crystal temperature from 155℃ to 250℃.     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

Power distribution in Yb~(3+)-doped double-cladding fiber laser

The distribution of pump light and signal light in Yb3+-doped double-cladding fiber laser is analyzed based on a rate equation model. Numerical simulation results are obtained. The numerical solution of the rate equation is shown to be in excellent agreement with the experimental data.     

Power distribution in Yb3+-doped double-cladding fiber laser

The distribution of pump light and signal light in Yb3+-doped double-cladding fiber laser is analyzed based on a rate equation model.Numerical simulation results are obtained.The numerical solution of the rate equation is shown to be in excellent agreement with the experimental data.     

High power all-solid-state quasi-continuous-wave tunable Ti:sapphire laser system

This paper reports a high power, all-solid-state, quasi-continuous-wave tunable Ti:sapphire laser system pumped by laser diode (LD) pumped frequency-doubled Nd:YAG laser. The maximum tuned output power of 4.2 W (797 nm) and tuned average power of 3.7 W were achieved when fixing the Ti:sapphire broadband output power at 5.0 W and applying 750-850 nm broadband coated mirror.