Effects of Post-Thermal Treatment on Quality of SiC Grown by PVT Method

We report the effects of post-thermal treatment on the quality of 2-inch 6H-SiC wafer cut from a crystal boule grown by physical vapour transportation method. The full widths at half maximum of x-ray diffraction rocking curves measured on sites across the 2-inch wafer become narrower, indicating the quality improvement after a three-step post-thermal treatment. It is found that the most common defects such as micropipes and inclusions can be significantly reduced after the treatment. Our results show that the post-thermal treatment is an effective route to improve the quality of SiC single crystals.     

Er3+和Yb3+共掺氟氧化物微晶玻璃的研究

制备了Er3 、Yb3 共掺的SiO2-A12O3-PbF2-CdF2系统玻璃,并进行相应的微晶化热处理,研究了氟氧化物微晶玻璃中Er3 离子的上转换发光特性.研究结果表明:原始玻璃经热处理后得到的β-PbF2相氟氧化物微晶玻璃,Er3 和Yb3 所在局域基质声子能量的降低,使微晶玻璃中Er3 上转换发光强度显著提高,而微晶化后Er3 、Yb3 离子局域环境发生变化,导致微晶玻璃中Er3 离子的绿光上转换荧光强度较强,而红光上转换荧光强度相对较弱.     

热处理对V-4Ti合金氦的滞留与热解吸行为的影响

钒合金由于其低中子诱导的放射性和良好的高温性能被认为是未来聚变堆很有希望的第一壁和结构材料。因为氦可以通过放电清洗和中子嬗变产生，氦的滞留与热释放行为将是钒合金在聚变堆应用的重要课题。A．V．Veen领导的研究小组用1keV的氦离子注入到10^13-10^14He／cm^2的剂量研究了钒合金的氦俘获和热解吸机理以及预退火处理的影响。两群热解吸峰被发现，他们认为一个对应于氦，空位一杂质链，另一个对应于氦，带有钒合金原有的缺陷，如细小的析出物所俘获。既然钒合金原有的缺陷与退火处理有关，热处理对氦在钒合金中的滞留的影响是可以预期的，并且已被实验所证实。     

医疗和危险废物高温洁净热处理及环境力学

结合2003年中国的突发危害公众健康的事件，分析了医疗、化学战剂及危险废物的分类、特性，比较了各种高温热处理技术的基本要求，方法分类和设备特点，包括：各类焚烧炉、热解炉和等离子体裂解装置．还对前处理工艺要求，尾气处理工艺等进行了分析讨论，讨论了防止二次污染的技术手段，特别介绍了二噁英等高危险性产物的特性．还介绍了发达国家的医疗废物和危险废物的管理、处置和二次污染防治等情况．     

热处理条件对双粉工艺中Bi—2212粉末的相组成影响

实验研究了Bi-2212粉末在空气，8％O2和纯O2种处理的相组成特征，指出通过改变热处理温度和气氛可控制前驱粉中对2223成相影响较大的(Bi，Pb)-2212相，Ca2PbO4相，2201相和14：24AEC等相。     

负载有MTiO_3(M=Sr或Ba)的TiO_2纳米棒复合材料的制备和表征

以Sr(OH)2或Ba(OH)2和TiO2纳米带为前驱物,通过水热反应直接制得了立方相MTiO3(M=Ba或Sr)纳米粒子负载的TiO2纳米复合材料。采用XRD,SEM,TEM,HRTEM和UV-Vis等测试手段对产物的组成、物相、形貌、结构和光学性质进行了详细表征。结果表明,Sr(OH)2或Ba(OH)2的加入量或反应时间皆对MTiO3纳米粒子负载量有较大影响,在一定程度上,氢氧化物加入量增多以及反应时间延长,纳米粒子负载量就会增大;无论是纯TiO2纳米带还是复合纳米棒,其吸收和发射光谱基本相同。对罗丹明B可见光催化降解实验结果证实,这些纳米复合材料皆有较高的光催化活性,远高于P-25的光降解活性。     

Effect of heat treatment on electronic phase in underdoped La2-xSrxCuO4 single crystal

Superconducting La1.937Sr0.063CuO4 crystals grown by the travelling-solvent floating-zone technique were thermally treated under various temperatures and oxygen pressures for moderately adjusting the oxygen content. The response of intrinsic electronic property of the crystals to the change of hole density in La2-xSrxCuO4 in the vicinity of the magic doping of x= 1/16 （= 0.0625） is studied in detail by magnetic measurements under various fields up to 1 T. It is found that when the superconducting critical temperature （Tc） increases with the oxygen content, there appears also a new subtle electronic state that can be detected from the differential curves of diamagnetic susceptibility dx/dT of the crystal sample. In contrast with the intrinsic state, the new subtle electronic state is very fragile under the magnetic fields. Our results indicate that a moderate change in oxygen doping does not significantly modify the intrinsic electronic state originally existing at the magic doping level.     

Magnetic domain structures of precipitation-hardened SmCo 2：17-type sintered magnets： Heat treatment effect

The typical magnetic domains of Sm（CObalFe0.25Cuo.07Zr0.02）7.4 magnets quenched through various heattreatment steps have been revealed by using magnetic force microscopy （MFM）. For the specimens in which the nominal c-axis is perpendicular to the imaging plane, the domain configurations change from plate-like for the as-sintered magnet to corrugation and spike-like for the homogenized one, and then to a coarse and finally to a finer domain structure when isothermally aged at 830℃ and then annealed at 400℃. However, only plate-like domains can be detected on the surfaces with the nominal c-axis parallel to the imaging plane. The finer domain （so-called interaction domain） is a characteristic magnetic domain pattern of the SmCo 2：IT-type magnets with high coercivities. Domain walls in a zigzag shape are revealed by means of MFM in final bulk SraCo 2：17-type sintered magnets.     

高压及热处理对氮碳薄膜激光诱导荧光效应的影响

应用激光激发荧光光谱实验对经热处理后及高压条件下的氮碳薄膜荧光光谱进行了测量分析。实验显示,热处理效应和高压效应均导致薄膜荧光疚降有者表现为不可恢复,后者为可恢复即卸压后荧光效率的恢复,表明导致荧光光谱效率低的微观机制不同,为氮碳薄膜荧光模型提供了新的实验证据。