飞秒激光-金属薄膜靶相互作用中靶前后超热电子能谱的比较

采用电子谱仪测量了飞秒激光-金属薄膜靶相互作用中靶前和靶后产生的超热电子能谱.结果显示：靶前超热电子能谱的峰出现在约430 keV处，靶后超热电子能谱的峰出现在约175 keV处；靶前超热电子的有效温度分别为218 keV和425 keV，靶后超热电子能谱出现“软化”现象，其有效温度分别为96 keV和347 keV.靶前和靶后超热电子能谱明显不同是由于超热电子输运穿越过密等离子体和冷材料的靶，并在靶后建立Debye鞘，鞘电场使靶后超热电子能谱峰向低能端移动，鞘电场和自生磁场导致靶后超热电子能谱产生“软化”，估算出的鞘电场小于激光电场.     

Excited atomic state of Li

An optical transition of 3489 A has been shown to arise from Li using beam foil spectroscopic technique. The mean life of the state emitting this radiation has been measured to be 2.23 ä 0.08 n sec.     

辐射烧蚀铝箔数值模拟研究

 利用一维多群辐射输运程序RDMG数值模拟神光II条件下辐射烧蚀铝箔的实验研究,详细描述了X光在铝箔中的辐射输运过程,清楚地显示了辐射热波在铝箔中的传播,给出铝等离子体温度密度的时空分布、铝箔背面出射的X光能谱及出射X光各能区能流随时间的变化,分析出射X光的能区对测量结果的影响,对神光II条件下辐射烧蚀铝箔的厚度范围进行初步的探讨。数值结果与实验结果相吻合。     

低压化成铝箔磷酸处理的研究与应用

对铝电解电容器低压化成箔作表面磷酸处理,研究了磷酸浓度、温度和作用时间对铝箔比容和耐水合升压时间的影响,优化最佳工艺条件,明显提高了铝电解电容器低压化成箔的性能,并应用于生产线.     

Hydrodynamics of a biologically inspired tandem flapping foil configuration

Numerical simulations have been used to analyze the effect that vortices, shed from one flapping foil, have on the thrust of another flapping foil placed directly downstream. The simulations attempt to model the dorsal–tail fin interaction observed in a swimming bluegill sunfish. The simulations have been carried out using a Cartesian grid method that allows us to simulate flows with complex moving boundaries on stationary Cartesian grids. The simulations indicate that vortex shedding from the upstream (dorsal) fin is indeed capable of increasing the thrust of the downstream (tail) fin significantly. Vortex structures shed by the upstream dorsal fin increase the effective angle-of-attack of the flow seen by the tail fin and initiate the formation of a strong leading edge stall vortex on the downstream fin. This stall vortex convects down the surface of the tail and the low pressure associated with this vortex increases the thrust on the downstream tail fin. However, this thrust augmentation is found to be quite sensitive to the phase relationship between the two flapping fins. The numerical simulations allows us to examine in detail, the underlying physical mechanism for this thrust augmentation.      

气体爆轰波在声学吸收壁下游的再加强过程

实验研究了爆轰波在声学吸收段下游发生的再恢复过程。利用声学吸收段首先将一个稳定的爆轰波衰减,于是产生一个非稳定爆轰波,速度降为 45% ~60?J。该非稳定爆轰波传出声学吸收段后再次加强,并在距声学吸收段出口端一定距离处突然发展成超驱动爆轰。实验利用烟迹技术捕捉了爆轰波从发生衰减到再次加强的全过程,获得了爆轰波再加强距离随初压变化的实验规律。由此,本文建立了再加强段内加速传播火焰的理论模型,称为激波 -爆燃波复合态,并解释了火焰加速和超驱动爆轰形成的机理。     

激光驱动飞片的线面成像VISAR测速技术

以激光驱动飞片速度场诊断为例,展示线面同时成像任意反射面速度干涉仪(VISAR)技术在超高速碰撞研究中的应用前景。将传统VISAR改为成像干涉结构,用变像管扫描相机和高速光电分幅相机分别记录作为信号载体的梳状干涉条纹随时间的变化,实现靶面一条线上各点速度历程和多个时刻二维靶面上所有点速度相对分布的测量。所研制的线面同时成像VISAR具有10μm的空间分辨和约15m/s的速度分辨能力。用其测量了激光驱动铝膜飞片的速度场,直观给出飞片的演化发展过程。实验结果表明,线面同时成像VISAR技术可以为激光驱动飞片、超高速碰撞等领域的理论研究和数值模拟提供有效比对实验数据。     

涂碳铝箔对磷酸铁锂电池性能影响研究

本文研究了使用涂碳铝箔作为正极集流体磷酸铁锂电池的性能。研究对比了使用普通铝箔和涂层铝箔的10 Ah软包磷酸铁锂电池的主要性能。研究表明：使用涂层铝箔不但可以提高磷酸铁锂材料的粘结性,而且使用导电涂层可以有效降低正极材料和集流体的接触内阻,从而减小电池内阻,提高电池倍率性能。与使用普通铝箔作为集流体相比,通过使用涂碳铝箔可以使得电池的内阻降低65%左右,但是,磷酸铁锂正极材料的克容量却偏低约5~10 mAh·g^-1,首次效率也偏低4%左右;在快速放电15C倍率下,使用涂碳铝箔的电芯比使用普通铝箔容量提高约15%左右,10C放电倍率下,平台增加0.3~0.4 V;使用涂碳铝箔电芯的常温自放电率较高,但容量恢复率也较高;550周循环下,使用涂碳铝箔可以使得电池的循环性能提高约1%。而在电池低温性能方面,使用涂碳铝箔对低温性能并无改善。     

A method for determining foil thicknesses in TEM by using convergent beam electron diffraction under weak beam conditions

In the present work, convergent beam electron diffraction was studied in zirconium (a material of intermediate atomic number) at 300 keV, under weak beam diffraction conditions. For a particular thickness, the details in an observed low order disc were matched to those calculated using the multibeam dynamical theory. This presents the possibility of determining foil thickness over a wide range, with an estimated experimental accuracy of ≈7% or less. In contrast to other convergent beam techniques, the present method, which uses weak beam conditions, can employ commonly-occurring low order reflections to extract thicknesses.

A simple equation based on the two beam approximation, is derived to determine foil thickness (to within ≈ 10%) without resorting to detailed image matching. This equation can be used for a rough estimate of foil thickness while carrying out TEM observations.     

强激光和超薄等离子体薄膜相互作用产生高次谐波

通过一维粒子（particle in cell,简称PIC）模拟，研制了超薄等离子体薄膜在两列旋转方向相反的圆偏振激光脉冲作用下的高次谐波辐射。在10^21W/cm^2强度的激光作用下，可以获得200次以上的高次谐波。当激光脉冲宽度较短时，由于等离子体薄膜被压缩所导致的多普勒频移对高次谐波产生了显著的频率调制。而这种多普勒频移可以通过对抽运光脉冲引入频率啁啾来补偿。