Comparison of Inductively Coupled Plasma with Classical Analytical Techniques in the Analysis of Southern Oregon Lithia Water: Inclusion of a Local Resource in the Undergraduate Chemistry Curriculum

Abstract

Lithia water, a community resource of local historical significance, is described as a central theme in the undergraduate analytical chemistry sequence. A statistical comparison of the classical determination of major cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and anions (HCO₃ ^?, Cl^?) reinforces statistical and charge‐balance concepts covered in analytical chemistry. Subsequent determination of these major cations by inductively coupled plasma (ICP) enables students to statistically evaluate the presence of bias between instrumental and classical methods. The effect of easily ionized elements on ICP calibration sensitivity and linearity via the use of cesium as an ionization suppressor is reported.     

The Use of Laser Induced Breakdown Spectroscopy (LIBS) to Study Catalyst Deactivation of V2O5/γ‐Al2O3 as Compared to Inductively Coupled Plasma Optical Emission Spectrometry

Laser Induced Breakdown Spectroscopy (LIBS) method is introduced as a novel approach in this work to study catalyst deactivation of V₂O₅/γ‐‐Al₂O₃ for gas‐phase dehydration of glycerol and producing acrolein. The LIBS results of V₂O₅/γ‐Al₂O₃ samples are compared with those data that are obtained by Inductively Coupled Plasma Optical Emission Spectrometry (ICP‐OES). Experimental data of LIBS data specify that line intensities of vanadium are decreased by deactivation of V₂O₅/γ‐Al₂O₃ catalyst. A comparison between the results of LIBS test as well as ICP‐OES analysis shows that the amount of vanadium is decreased in the catalyst. Moreover, coke formation changes the surface of the catalyst. The results of deactivation of V₂O₅/γ‐Al₂O₃ are also compared with Pd/C catalyst deactivation.     

Synergistic inhibition effect of 2-mercaptobenzothiazole and Tween-80 on the corrosion of brass in NaCl solution

The corrosion inhibition of brass in 0.2 M NaCl in the presence of 2-mercaptobenzothiazole (MBT) and polyoxyethylene sorbitan monooleate (Tween-80) has been investigated using potentiodynamic polarization, X-ray photoelectron spectroscopy and inductively coupled plasma analysis. Analysis of the results revealed that the addition of MBT and Tween-80 inhibits the corrosion of brass in 0.2 M NaCl. Potentiodynamic polarization measurements showed that MBT acts as a mixed-type inhibitor and Tween-80 as an anodic inhibitor. Corrosion inhibition occurs through adsorption of the inhibitor on brass surface without modifying the corrosion mechanism. The adsorption of MBT and Tween-80 both follow Langmuir adsorption isotherm. Potentiodynamic polarization results suggested that the mixture of MBT and Tween-80 acts as a mixed-type inhibitor. Inhibition efficiency of 79.0 and 62.5% were obtained in the presence of optimum concentration of MBT and Tween-80, respectively. The addition of the mixture of MBT and Tween-80 enhanced the inhibition efficiency to 94.0% and showed a synergism of inhibition. XPS analysis indicated that MBT adsorbed on brass surface along with Tween-80 in the presence of the mixture of MBT and Tween-80. The results of solution analysis using ICP showed that the mixture of MBT and Tween-80 effectively controlled the dezincification of brass.     

An integrated spectroscopic approach to investigate pigments and engobes on pre‐Roman pottery

Painted Canosa ceramics were examined to identify the nature of the pigments employed and their manufacturing technology. A multi‐technique approach was used, comprising Raman microspectroscopy and laser ablation hyphenated to inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS). The analysed samples were mainly produced for burial in tombs and were not intended for everyday use. They belong to the period between the end of the mid‐7th century and the first half of the 4th century BC, and were excavated from the Toppicelli archaeological district near the suburbs of Canosa (Puglia, Italy). Forty‐eight pottery fragments were available for this study. No handling of the samples was required for the Raman study, and it was possible to excise the pigmented layer in such a way that the lacunae were not distinguishable to the naked eye due to the micrometric size of the laser spot as far as LA‐ICP‐MS is concerned. Their combination turned out to be quite useful for the investigation of these archaeological materials: the chemical nature of the white, red, brown and black pigments employed in the pottery manufacture was investigated. Iron and manganese compounds were identified as the red and brown/black main colouring substances, respectively; on the other hand, whites and engobes (whitish slips) were based on kaolinite. This set of colouring substances is of importance, as it enabled the artisan to obtain in one oxidising firing cycle brown, black and red paints. Finally, the finding of manganese black in these Canosa potsherds confirms that Canosa was an important centre connecting the near East to central Italy and Europe since the pre‐Roman age. Copyright © 2010 John Wiley & Sons, Ltd.     

Chemical characterisation of bioactive compounds in Medicago sativa growing in the desert of Oman

Medicago sativa Linn growing in Omani desert were chemically characterised using flame photometry, inductively coupled plasma, gas chromatography–mass spectrometry and high performance liquid chromatographic (HPLC) analysis. HPLC analyses were performed to determine the phenolics and flavonoids present in M. sativa. The major compounds detected in M. sativa leaves were protchaechenic acid (3.22%), hydroxyl benzoic acid (1.05%), β-Phenyl caffate (0.97%) and kaempherol (0.89%). Pterostilbene, a cholesterol-lowering compound, was detected in M. sativa.     

Alternative organic solvents for HILIC separation of cisplatin species with on-line ICP-MS detection

Several low volatile organic solvents were evaluated as organic modifiers in eluents for HILIC separations of cisplatin species to optimize the on-line coupling of HILIC to inductively coupled plasma MS (ICP-MS). The aim was to identify a solvent giving low solvent vapor loading of the ICP, to maximize analyte sensitivity and minimize carbon depositions on instrumental parts, while retaining chromatographic performance. The best overall performance of the HILIC-ICP-MS system for the analysis of cisplatin was achieved using 1,4-dioxane as eluent, yielding high retention and an HILIC type retention mechanism, at the expense of a 50% drop in column efficiency due to the higher viscosity of 1,4-dioxane compared to the more commonly used HILIC solvent ACN. Using 1,4-dioxane as solvent in HILIC provides the best compromise between carbon deposition and separation efficiency among a series of high-boiling water-miscible solvents tested.     

微波消解/ICP-AES法测定污水处理厂污泥中的重金属

采用微波消解/电感耦合等离子发射光谱法(ICP-AES)测定了城市污水处理厂污泥中Cd、Cr、Cu、Mn、Mo、Ni、Pb、Zn等8种重金属元素,并优化了ICP仪器工作参数及微波消解条件.方法的检出限为0.001～0.01mg/L.相对标准偏差为2.0%～9.2%(n=7),回收率为85.3%～105.0%.     

ICP-MS as a novel detection system for quantitative element-tagged immunoassay of hidden peanut allergens in foods

A novel ICP-MS-based ELISA immunoassay via element-tagged determination was devised for quantitative analysis of hidden allergens in food. The method was able to detect low amounts of peanuts (down to approximately 2 mg peanuts kg⁻¹ cereal-based matrix) by using a europium-tagged antibody. Selectivity was proved by the lack of detectable cross-reaction with a number of protein-rich raw materials.     

Coprecipitation with calcium hydroxide for determination of iron in fish otoliths by collision cell ICP-MS

A method has been described for the determination of iron from fish otoliths containing high levels of calcium by collision cell technology (CCT) ICP-MS. Iron (Fe) in otolith solutions was quantitatively coprecipitated with small amounts of calcium hydroxide by adding 1.0 M sodium hydroxide solution. The performance of CCT-ICP-MS pressurized with He/H(2) cell gas was investigated on the elimination of Ca-based spectral interferences at m/z 54, 56 and 57. Molecular ion interferences at m/z 54 and 56 were reduced by 2 orders of magnitude. However, the interferences at m/z 57 increased by the same amount in the presence of Ca in solutions owing to the formation of (40)Ca(16) OH(+) through reactions with H(2) in collision cell, indicating that (57)Fe was not suitable for the determination of Fe from otoliths. Results for (56)Fe suffered significantly from interferences of Ca-based molecular ions when the Ca concentration in solution exceeded 100 microg ml(-1), for which matrix-matched calibration was required for accurate determination. CCT with the aid of He/H(2) cell gas proved to be very effective in eliminating the interferences ((40)Ar(14)N(+) and (40)Ca(14)N(+)) at m/z 54. Presence of Ca up to 300 microg ml(-1) had virtually no effect on the ion signals of (54)Fe, which with low background signals, afforded accurate determination of Fe from otoliths by using aqueous external standards.