1-脱氢松香酰基-3-芳酰胺基硫脲及其1,3,4-噻二唑类衍生物的合成及抑菌活性

脱氢松香酸;脱氢松香酰基芳酰胺基硫脲;芳基脱氢松香酰胺基噻二唑;抑菌活性     

气压对激光烧蚀Al等离子体中粒子速度的影响

在背景气压为8× 10-3— 100Pa范围内 ,通过测量脉冲激光烧蚀平面Al靶产生的等离子体辐射谱的时间分辨特征 ,比较空间不同点辐射的飞行时间轮廓的相对延迟 ,从而得到辐射粒子速度及其空间分布 .利用绝热膨胀的理论和激波模型分别对背景气压小于 0 .6Pa的结果和 5Pa时的结果作了分析 ,并得出激波的波面基本上为柱对称. With the ambient gas pressure in the range from 8×10 -3 to 10 2 Pa, Q-switched YAG laser ablates plane aluminum target and plasma are produced. Optical emission spectroscopy is used to carry out time-resolved analysis of atomic particles. Using the resonance transition of Al I 396.1 nm (3p 2P-4s 2S), the spatiol velocity distribution of Al I has been obtained under the laser energies of 160 mJ/pulse when the ablating size is about 200 μm. The velocity is at the order of 10 6 cm/s...     

参数激励与强迫激励联合作用下非线性振动系统的分叉

本文利用多尺度法研究了参数激励与强迫激励联合作用下非线性振动系统的分叉问题,给出了分叉集和八种分叉响应曲线。     

利用氢化物发生-冷阱捕集-原子吸收光谱联用技术测定雄黄染毒大鼠血中砷的含量

采用氢化物发生-冷阱捕集-原子吸收光谱法(HG-CT-AAS)测定了雄黄染毒大鼠血中不同形态砷的含量.结果表明,雄黄在大鼠体内的代谢产物为无机砷、一甲基胂酸和二甲基胂酸,其中二甲基胂酸是主要代谢产物;3种形态砷的精密度、准确度、回收率及线性关系良好.     

几何光学实验中一现象的理论分析和验证

1引言 在用物距像距法测量凸透镜的焦距实验中,从理论上讲在不同的物距范围内,下述两种调节方法均易从像屏上得到清晰像:(1)物和透镜固定(令物距大于焦距),调节像屏成像;(2)物和像屏固定(令二者间距满足成实像的条件),调节透镜成像.     

1-脱氢松香酰基-3-取代硫脲以及5-(脱羧脱氢松香-4-基)-3-芳氨基- 1H-1,2,4-三唑化合物的合成与生物活性

以广西的优势资源松香为原料, 脱氢松香酸与亚硫酰氯、硫氰化钾分别在回流条件下反应6 h和1.5 h, 得到脱氢松香酰异硫氰酸酯, 产率52%; 然后与胺在加热回流条件下反应1.5 h, 得到11种1-脱氢松香酰基-3-取代硫脲4, 产率63%～94%; 4a～4f 分别与水合肼在搅拌下回流反应3～6 h, 得到6种5-(脱羧脱氢松香-4-基)-3-芳氨基-1H-1,2,4-三唑化合物5, 产率70%～94%; 所有化合物的结构均经IR, 1H NMR, 13C NMR和元素分析确认. 初步生物活性测试表明, 4e, 4f, 4j, 5b对枯草杆菌抑菌率较高, 特别是4j在浓度为50 mg/L时就达到较好效果; 4b, 4h, 4i, 5e在100 mg/L时对大肠杆菌的抑菌效果较好.     

TiCl_4共引发异丁烯正离子聚合合成反应活性聚异丁烯

由H2O/TiCl4/甲醇或乙醚体系引发异丁烯在二氯甲烷与己烷混合溶剂中进行正离子聚合,探讨甲醇用量、聚合时间等因素对正离子聚合以及产物分子量、分子量分布和末端基结构的影响,并在此基础上探讨TiCl4共引发混合C4馏分中异丁烯选择性正离子聚合以制备活性聚异丁烯的可行性.结果表明,含氧试剂对聚合反应起到明显的调节作用,可适当稳定碳正离子活性中心,降低链增长速率,降低聚合产物的分子量(Mn=1600~4600),使分子量分布明显变窄(Mw/Mn=1.35~2.05),并可调节大分子链末端基结构及其含量.降低聚合体系中微量单体浓度以及适当延长聚合反应时间,均有利于提高聚异丁烯大分子链末端α-双键结构含量.通过TiCl4共引发异丁烯正离子聚合制备出末端α-双键含量可以达到70%以上的低分子量高反应活性聚异丁烯.此外,该引发体系还可引发混合C4馏分原料中异丁烯进行高选择性正离子聚合,得到Mn=2000、Mw/Mn=2.59、端基α-双键含量为38.9%的聚异丁烯.     

Study of preparation and adsorption properties of imidacloprid mesoporous surface molecularly imprinted polymerEI北大核心CSCD

Imidacloprid mesoporous surface molecularly imprinted polymer (MIP) was rapidly synthesized by one[1]step method, with imidacloprid as template molecule, methacrylic acid (MAA) as functional monomer, azodiisobutyronitrile (AIBN) as initiator and ethylene glycol dimethacrylate (EGDMA) as crosslinker. The characterization of MIP was completed by SEM, TEM, FT-IR, and nitrogen adsorption-desorption isotherms. The adsorption conditions were optimized. At the imidacloprid concentration of 100 µg/mL, MIP reached adsorption saturation and the adsorption time was shorter than that of the corresponding non-imprinted polymer (NIP), with the saturated adsorption value of 3.628 mg/g, and the imprinting factor of 1.27, indicating that the mesoporous structure and surface imprinting improved the mass transfer rate of imidacloprid in the adsorption process, so as to improving the adsorption capacity. In addition, under the same conditions, the adsorption capacity of MIP for imidacloprid was higher than acetamiprid, thiacloprid and thiamethoxam, indicating that MIP had better specific recognition ability. The imidacloprid mesoporous surface MIP can be prepared simply and rapidly, which may be a potential material in the field of sample pretreatment and rapid detection. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

从机理和动力学角度分析和优化硝化反应条件

从芳香化合物的硝化反应出发,使用动力学手段对反应机理进行处理,推导出可能的速率方程,讨论反应底物的结构对决速步骤的影响,分析反应的影响因素,探讨优化反应的方法.针对在反应体系中加入脱水剂提出新的机理假设,推导出速率方程并讨论了其合理性.该讨论作为一个用物理化学原理优化有机反应条件的优秀案例,用以加强学生对有机化学反应的理解.