发展固态量子信息与计算的实验研究

量子计算与量子信息是21世纪基础和应用科学研究的一大挑战.要实现实用意义上的量子信息和量子计算,必须解决量子比特系统的可拓展性问题.基于现代半导体技术的固态量子系统,其应用和最终产业化的可行性较高.然而,固态量子体系受周边环境的影响比较严重,控制其退相干,维持其量子状态的难度更高.实验固态量子计算的研究是个新的领域,尚无实用的技术和方法. 文章介绍了中国科学院物理研究所固态量子信息和计算实验室近几年来新开辟的自旋、冷原子、量子点(包括原子空位)、功能氧化物和关联体系等固态量子信息的新载体和同量子计算与量子信息相关的科学与技术难题的实验研究.     

原子核单粒子共振态的研究进展

共振是自然界普遍存在的有趣现象。在核物理领域,存在许多奇特现象,共振在其中扮演着重要角色。介绍了近期发展的RMF-CSM、RMF-CGF和RMF-CMR方法及其对原子核单粒子共振态的研究。给出了120Sn,31Ne等核的单粒子共振态的能量和宽度及其随质量数、形变的变化规律,分析了19C,31Ne和39Mg等核的晕形成的物理机制和在N=20附近能级反转的原因。特别是新发展的RMF-CMR方法,在描述稳定核和奇特核方面都取得了成功,支持Zr同位素存在巨晕的预言。Resonance is an interesting phenomenon in nature. In nuclear physics, resonance plays an important role in the formation of many exotic phenomena. This paper introduces the recently developed RMF-CSM, RMFCGF, and RMF-CMR methods and their researches on nuclear single-particle resonances. The energies and widths of the single-particle resonant states in 120Sn and 31Ne and their evolution to mass number and deformation are given. In addition, the physical mechanism of the halo formation in 19C, 31Ne and 39Mg and the cause of energy level inversion near N=20 are analyzed. In particular, the newly developed RMF-CMR approach has been successful in describing stable and exotic nuclei and supports the prediction that Zr isotopes exist in a giant halo.     

荧光法研究牛血清白蛋白与三羟基苯基荧光酮-钼(Ⅵ)配合物探针的作用机理

用荧光光谱法研究了三羟基苯基荧光酮(TH-PF)-钼(Ⅵ)配合物与牛血清白蛋白的结合反应。探讨了TH-PF-Mo(Ⅵ)配合物对蛋白质内源荧光的猝灭机理,并测定了不同温度下的结合常数,温度为25 ℃时,荧光猝灭法测得该反应的结合常数为K=4.78×104 L·mol-1,温度为40 ℃时,荧光猝灭法测得该反应的结合常数为K=3.72×104 L·mol-1。根据Frster非辐射能量转移理论,确定了给体-受体之间的作用距离和能量转移效率(E=0.314),并根据热力学参数确定了TH-PF-Mo(Ⅵ)配合物与牛血清白蛋白之间的作用力类型,以静电引力为主。     

A digital filtering scheme for SQUID based magnetocardiography

Considering the properties of slow change and quasi-periodicity of magnetocardiography (MCG) signal, we use an integrated technique of adaptive and low-pass filtering in dealing with two-channel MCG data measured by high $T_{\rm c}$ SQUIDs. The adaptive filter in the time domain is based on a noise feedback normalized least-mean-square (NLMS) algorithm, and the low-pass filter with a cutoff at 100Hz in the frequency domain characterized by Gaussian functions is combined with a notch at the power line frequency. In this way, both relevant and irrelevant noises in original MCG data are largely eliminated. The method may also be useful for other slowly varying quasi-periodical signals.     

X-ray observations of tungsten wire array Z-pinch implosions on QiangGuang-1 facility

Z-pinch experiments with two arrays consisting, respectively, of 32 4-μm- and 6-μm-diameter tungsten wires have been carried out on QiangGuang-1 facility with a current rising up to 1.5MA in 80ns. At early time of implosion, x-ray framing images show that the initial emission comes from the central part of arrays, and double clear emission rings, drifting to the anode and the cathode at 5×10⁶cm/s and 2.4×10⁷cm/s respectively, are often produced near the electrodes. Later, in a 4-μm-diameter tungsten wire array, filamentation caused by ohmic heating is prominent, and more than ten filaments have been observed. A radial inward shift of arrays starts at about 30\,ns earlier than the occurrence of the x-ray peak power for both kinds of arrays, and the shrinkage rate of emission region is as high as 1.7×10⁷cm/s in a 4-μm-diameter tungsten wire array, which is two times higher than that in a 6-μm one. Emission from precursor plasmas is observed in implosion of 6-μm-diameter tungsten wire arrays, but not in implosion of a 4-μm-diameter tungsten wire array. Whereas, in a 4-μm-diameter tungsten wire array, the soft x-ray emission shows the growth of m=1 instability in the plasma column, which is caused by current. The reasons for the discrepancy between implosions of 4-μm- and 6-μm-diameter tungsten wire arrays are explained.     

Preparation and tribological properties of DLC/Ti filmby pulsed laser arc deposition

This paper reports that DLC (diamond like carbon)/Ti and DLC films were prepared by using pulsed laser arc deposition. R-ray diffraction, Auger electron spectroscopy, Raman spectroscopy, atomic force microscopy, nanoindenter, spectroscopic ellipsometer, surface profiler and micro-tribometer were employed to study the structure and tribological properties of DLC/Ti and DLC films. The results show that DLC/Ti film, with $I(D)/I(G)$ 0.28 and corresponding to 76{\%} sp$^{3}$ content calculated by Raman spectroscopy, uniform chemical composition along depth direction, 98 at{\%} content of carbon, hardness 8.2 GPa and Young's modulus 110.5 GPa, compressive stress 6.579 GPa, thickness 46~nm, coefficient of friction 0.08, and critical load 95mN, exhibits excellent mechanical and tribological properties.     

四苯基卟啉蒽醌化合物的质子化热力学

表观质子化常数;电子吸收光谱;PM3;四苯基卟啉蒽醌化合物的质子化热力学     

四-(二甲氨基苯基)卟啉及其金属配合物的合成及光谱性能研究

以丙酸、乙酸、硝基苯为溶剂一步法合成了四-(二甲氨基苯基)卟啉(T(DMAP)P),并采用氯仿-N,N二甲基甲酰胺为溶剂合成了其与Zn2+,Mn2+,Tb3+三种离子的配合物,考察了溶剂种类、温度、时间对反应的影响,探讨了卟啉与金属盐反应两者用量的最佳比例,在较温和条件下合成了卟啉金属配合物,避免了高温合成金属卟啉不稳定现象。利用元素分析,IR,UV-Vis等方法确定了目标化合物的组成和结构。考察了不同浓度及温度下卟啉配合物的电导率并计算了其摩尔电导率。实验结果发现,卟啉与铽离子配合物摩尔电导率远大于锌、锰配合物。实验研究了不同金属离子对反应的影响,重点考察了卟啉及其金属配合物的分子光谱性能的差异。与四苯基卟啉相比,T(DMAP)P及其金属配合物UV-Vis光谱均发生红移,探讨了该现象产生的原因。     

黄花倒水莲皂甙Reinioside C在大鼠体内代谢产物的鉴定

为了探讨五环三萜皂甙ReiniosideC在大鼠体内代谢产物的结构,单剂量口服ReiniosideC,5h后放血处死,用制备型高效液相色谱方法对血液和各脏器进行提取分离,从大肠内容物和粪中,分离得到了7种代谢产物.用FAB-MS,¹H NMR和¹³C NMR方法鉴定了它们的结构.     

CTAB对四-(4-N-甲基吡啶)卟啉SERS谱的影响

研究了阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)对四-(4-N-甲基吡啶)卟啉(H2TMPyP)及其银配合物(AgTMPyP)在Ag胶中的表面增强拉曼散射(SERS)谱的影响.SERS光谱表明,吸附于Ag胶粒的H2TMPyP与衬底银原子结合形成AgTMPyP,加入CTAB后,部分AgTMPyP表面络合物还原为H2TMPyP.相似的去金属化反应也出现在AgTMPyP/Ag胶/CTAB体系中.CTAB的加入使SERS谱带强度明显增加.AgTMPyP的去金属化被认为是由于CTAB的存在使Ag胶颗粒表面附近微环境发生改变.