Experiment studies on the polarized gamma-rays generation at KEK-ATF

Polarized positrons can be created through electron-positron pair creation from circularly polarized gamma-rays. Laser-Compton scattering is an effcient method to generate circularly polarized gamma-rays. A high finesse 2-mirror optical stacking cavity had been installed on the straight section of the electron storage ring at KEK-ATF. A 1064 nm circularly polarized pulsed laser beam was stacked in the cavity. Polarized gamma-rays with a maximum energy of 28.3 MeV were produced via inverse Compton scattering of the enhanced laser pulse off an electron beam of 1.28 GeV. The number of generated gamma photons per collision was estimated by a photon detector. It was found that the experimental result was in agreement with the simulated value.     

BEPCII丝靶束流截面测量系统

To monitor the beam profile at the end of the linac non-destructively, a wire scanner as a new diagnostic instrument was designed, manufactured and installed in 2007. Since then, several measurements have been carried out using this device. This paper describes the whole system of the wire scanner and the testing results.     

聚邻氨基苯硫酚/纳米金复合膜分子印迹传感器测定2, 4-二氯苯酚

在2,4-二氯苯酚(2,4-DCP)存在下, 在金电极表面自组装邻氨基苯硫酚(oATP)并电聚合oATP/金纳米粒子, 制得2,4-DCP印迹复合膜电化学传感器.采用循环伏安法和交流阻抗技术对传感器制备过程进行了表征, 以K₃Fe(CN)₆为探针, 间接对2,4-DCP进行定量分析.结果表明, 2,4-DCP在5.0×10^-8~1.2×10^-4 mol/L 浓度范围内与K₃Fe(CN)₆示差脉冲伏安曲线的峰电流呈线性关系(R²=0.9964), 检出限为1.5×10^-8 mol/L(S/N=3).该印迹传感器可在几种氯代酚干扰下选择性测定2,4-DCP.利用该传感器对环境水样进行加标回收检测, 回收率为95.2%~109.3%.     

二阶非线性中立型时滞微分方程的振动性

考虑二阶非线性中立型时滞分方程[a(t)|(z(t) p(t)x(t-τ))‘|^a-1(x(t) p(t)x(t-τ))‘]‘ q(t)|x(t-σ）|^a-1x(t-σ)=0(*)本文获得了方程（*)所有解振动的充分条件,推广并改进了[1]的结果。     

一种新的X射线脉冲星信号模拟方法

由于无法在地面直接观测到X射线脉冲星信号, 且空间飞行探测耗时长, 成本高, 模拟具有真实物理特征的X射线脉冲星信号对X射线脉冲星信号处理方法及导航方案的验证具有重要意义. 本文提出了一种利用太阳系质心处脉冲星信号模型和航天器轨道信息, 建立航天器处实时光子到达速率函数, 再利用尺度变换法产生光子到达时间序列的脉冲星信号模拟新方法. 该方法真实还原了脉冲星信号的频率缓变特性, 考虑了动态探测环境下的相对论效应, 且避免了现有模拟航天器处光子序列方法中的迭代过程, 产生非齐次泊松光子到达时间序列的运算量也低于常用的齐次泊松过程筛选法和反函数递推法. 数值仿真从频率特性、流量特性、轮廓相似度及与实测数据的接近程度四个方面验证了该模拟方法的正确性.     

Progress on the construction of the 100 MeV/100 kW electron linac for the NSC KIPT neutron source

IHEP, China is constructing a 100 MeV/100 kW electron Linac for NSC KIPT, Ukraine. This linac will be used as the driver of a neutron source based on a subcritical assembly. In 2012, the injector part of the accelerator was pre-installed as a testing facility in the experimental hall #2 of IHEP. The injector beam and key hardware testing results met the design goal. Recently, the injector testing facility was disassembled and all of the components for the whole accelerator have been shipped to Ukraine from China by the ocean shipping. The installation of the whole machine in KIPT will be started in June, 2013. The construction progress, the design and testing results of the injector beam and key hardware are presented.     

利用微分学证明不等式的几种典型证法

通过对几道不等式证明题的分析,文中总结了利用微分学证明不等式的常用方法,有助于学生加深对微分学知识的理解,激发学生的学习兴趣,也有利于学生发散思维培养及提高解决问题的能力.     

α-呋喃甲醛缩对硝基苯胺对Hg2+的识别研究

设计合成了荧光传感分子α-呋喃甲醛缩对硝基苯胺(FFNA),通过红外(IR)光谱和核磁共振谱(1H NMR)表征了其结构.并应用荧光光谱研究其在水中对过渡金属离子的响应.结果表明,FFNA的荧光发射光谱对Hg2+表现出高的选择性响应,对Zn2+、Ni2+和Cd2+等金属离子响应则很弱;初步探讨了受体分子与Hg2+结合模式与荧光猝灭原因.     

RF-thermal-structural-RF coupled analysis on atravelling wave disk-loaded a ccelerating structure

The travelling wave (TW) disk-loaded accelerating structure is one of the key components in normal conducting (NC) linear accelerators, and has been studied for many years. In the design process, usually after the dimensions of each cell and the two couplers are finalized, the structure is fabricated and tuned, and then the whole structure RF characteristics are measured by using a vector network analyzer. Before fabrication, the whole structure characteristics (including RF, thermal and structural ones) are less simulated due to the limited capability of currently available computers. In this paper, we described a method for performing RF-thermal-structural-RF coupled analysis on a TW disk-loaded structure using only one PC. In order to validate our method, we first analyzed and compared our RF simulation results on the 3 m long BEPCⅡ structure with the corresponding experimental results, which shows very good consistency. Finally, the RF-thermal-structure-RF coupled analysis results on the 1.35 m long NSC KIPT linac accelerating structure are presented.     

20 cm氙离子推力器放电室性能优化

束流离子生产成本和推进剂利用率是表征离子推力器放电室性能的重要参数。在考虑不改变放电室几何结构、磁场分布并保持离子推力器比冲和效率的前提下,利用一维经验分析模型对兰州空间技术物理研究所研制的LIPS-200离子推力器放电室性能进行了优化分析,以实现推力器的推力从40 mN提高到60 mN的目标要求。分析结果表明,提高放电室推进剂流率至2.06 mg/s,放电室内放电电流维持在6.9 A,放电室内平均氙离子密度达到2.1671017 m-3时,可以保证引出1.2 A的束流,推力器达到60 mN的推力。与之对应的推进剂利用率为92%,束流离子生产成本约为188.515 W/A,相比推力40 mN时,推进剂利用率为88%、束流离子生产成本为188.29 W/A的情况,放电室性能有所提高。另外,放电室性能优化过程中其鞘层电位始终保持在3.80~6.65 eV范围内。