Investigation of operational parameters for an industrial CFB combustor of coal, biomass and sludge

The combustion of coal and/or biomass （sludge, wood waste, RDF, etc.） in a circulating fluidized bed has been a commercial topper for over 20 years, and references to principles and applications are numerous and widespread although few data are presented concerning the operation of large scale CFB-units. The authors studied the CFB-combustion at UPM-Kymmene （Ayr）, a major paper mill relying for its steam production upon the combustion of coal （80-85 %）, wood bark （5-10%） and wastewater treatment sludge （5-10%）. The maximum capacity of the CFB is 58 MWth. A complete diagnostic of the operation was made, and additional tests were performed to assess the operating mode. The plant schematics, relevant dimensions and process data are given. To assess the operation of the UPM-CFB, it is important to review essential design parameters and principles of CFB combustors, which will be discussed in detail to include required data, heat balance and flowrates, operating versus transport velocity, kinetics and conversion （including the possible effect of the Bouduard reaction if carbon is present）. Since the residence time in the riser and the cyclone efficiency determine the burnout of circulating fuel-particles, the UPM-CFB was subjected to a stimulus response technique using nickel oxide as tracer. Results illustrate the efficiency of the cyclone separation and the number of recycle loops for particles of a given size. Results will also be used to assess the cyclone operation and efficiency and to comment upon expected and measured carbon conversion.     

纯铝在单轴应力循环作用下棘轮行为的试验研究

对纯铝进行了单轴应变控制和应力控制下的系统循环试验。对纯铝应变循环下的循环应变幅值、应变幅值历史、平均应变对循环特性的影响进行了揭示，对纯铝在非对称应力循环下的应力幅值、平均应力及其历史对循环蠕变〈即棘轮〉的影响进行了分析，得到了纯铝单轴循环行为的一些有意义的结果。     

论可积微分约束引入的循环积分

 对循环坐标和多余坐标间存在一类线性可积微分约束的力学系统，导出了循环积分的一般表 达式. 采用实例分析了产生循环积分的原因，并解释了该循环积分的物理意义.     

新型自然循环自动清洗式蒸发器及设计原理

以高效蒸发器为目标，旨在以自然循环替代高能耗的强制循环泵、以自动清洗取代加热面盐垢的周期性停车清洗．主要研究沸腾室内的不平衡汽化过程机理，提出动力温度的新概念，采用显热与汽化热转换平衡的研究方法，得到自然循环推动力的工程设计计算式，并且由此引出推动力强化的基本原则，进而获得中试的成功．还提出加热室必须采用能够低流速下自转清洗又高效传热强化的螺旋齿带，才能保障循环总阻力低于推动力．     

高温合金材料热机械疲劳实验技术

本文以ＡＩＳＩ３１６Ｌ不锈钢材料为例介绍了高温低周应变控制热机械疲劳（ＴｈｅｒｍｏｍｅｃｈａｎｉｃａｌＦａｔｉｇｕｅ）试验，温度循环和机械应变循环为相同频率，它们间的相位关系分为同相位和反相位两种．温度循环范围选为２５０～５００℃和２５０～６５０℃两种．通过计算机自动控制的实验系统所得到的试验数据，探讨了热机械疲劳应力－应变响应，裂纹萌发和扩展的性质，材料微观损伤分析和温度范围变化对疲劳性能和寿命的影响．对疲劳试验过程中循环回滞曲线的分析，给出了材料硬化阶段和循环稳定阶段的特性．     

循环载荷下砂质土的本构模型

提出了一个描述砂质土循环载荷条件下主要特性的本构模型，并且采用不同围压下多种加载途径的土力学实验确定了模型中的待定材料常数，由本构模型的增量工数值积分计算所得到的理论曲线与不同应力路径下实验曲线十分接近，经实验验证这种本构模型能广泛地应用土工问题的弹－塑性有限元分析中。     

NEW METHOD FOR LOW ORDER SPECTRAL MODEL AND ITS APPLICATION

In order to overcome the deficiency in classical method of low order spectral model, a new method for low order spectral model was advanced. Through calculating the multiple correlation coefficients between combinations of different functions and the recorded data under the least square criterion, the truncated functions which can mostly reflect the studied physical phenomenon were objectively distilled from these data. The new method overcomes the deficiency of artificially selecting the truncated functions in the classical low order spectral model. The new method being applied to study the inter-annual variation of summer atmospheric circulation over Northern Hemisphere, the truncated functions were obtained with the atmospheric circulation data of June 1994 and June 1998. The mechanisms for the two-summer atmospheric circulation variations over Northern Hemisphere were obtained with two-layer quasi-geostrophic baroclinic equation.     

阶梯压电层合梁的波动动力学特性

采用行波理论系统地研究了压电阶梯梁的自由振动分析以及强迫响应的分析方法. 基于分布 参数理论研究了压电阶梯梁的波传播特性，忽略柔性梁横向剪切和转动惯量的影响，给出了 梁的轴向和横向的简谐波解. 将压电阶梯梁离散化为单元，考虑压电片的刚度和质量的影响， 建立了节点散射模型. 应用位移连续和力平衡条件，推导了节点的波反射和波传递矩阵，在 此基础上，引入波循环矩阵的概念，给出波循环矩阵、波传递系数矩阵的确定方法. 应用波 循环矩阵可以有效地计算结构的固有频率. 另外，应用波传递系数研究了压电陶瓷作动器位 置对其驱动能力的影响. 得出两个主要结论：1)作动器靠近悬臂梁固定端将有较强的驱动 能力，悬臂梁边界反射行波产生弯曲消失波有利于增大压电波的模态传递系数；2)模态传 递系数与固有频率的灵敏度密切相关，波传递系数越大, 对应该处固有频率变化灵敏度越大. 另外，数值算例表明了行波方法比有限元方法具有更高的计算精度.     

拉-拉循环荷载作用下的界面脱粘研究

应用弹性力学和断裂力学基本理论，基于剪滞模型，研究了纤维增强复合材料中纤维与基体界面在拉-拉循环荷载作用下的疲劳脱粘特性。建立了描述疲劳裂纹扩展的等效Paris公式，得到了界面疲劳脱粘扩展速率、脱粘应力以及脱粘界面的摩擦系数与循环加载次数的关系式。通过数值模拟计算，进一步分析了界面疲劳脱粘的力学机理。本文分析，考虑了疲劳加载引起的脱粘界面的损伤及损伤分布的不均匀性。同时还考虑了材料泊松比的影响。     

Regimes of vortex shedding from an in-line oscillating circular cylinder in the uniform flow

A finite volume method for the time dependent viscous incompressible flow around an in-line oscillating circular cylinder at Reynolds number of 200, 855 is presented in this paper. The Navier-Stokes equations in a finite volume form are solved with a moving grid system, based on a time dependent coordinate transformation. To investigate the vortex-shedding characteristics behind the circular cylinder and the effects of Reynolds number and other non-dimensional parameters such as reduced amplitude and reduced frequency， several numerical schemes have been tested with different amplitude and frequency close to Sto and a harmonic at each Reynolds number. Present numerical results indicate several types of vortex shedding mode which is known mainly depending on the reduced frequency and also the reduced amplitude, which is called synchronization or lock-on.