Directed segregation in compartmentalized bi-disperse granular gas

A bi-disperse granular gas in an asymmetrical two-compartment system is studied experimentally.The presence of asymmetry within the range of our experimental parameters results in a directed segregated state and a directed clustering state.This deterministic system does not depend on the initial conditions.A modified flux model based on Lohse’s flux model for bi-disperse granular gases is derived.The modified flux model explains qualitatively the experimental results.     

Dynamic control of retrieval contrast in a ∧-type atomic system

We propose an efficient scheme for optimizing the optical memory of a sequence of signal light pulses in a system of ultracold atoms in ∧ configuration.The memory procedure consists of write-in,storage,and retrieval phases.By applying a weak microwave field in the storage stage,additional phase-dependent terms are included,and the contrast of the output signal pulses can be dynamically controlled（enhanced or suppressed） through manipulating the relative phase φ between optical and microwave fields.Our numerical analysis shows that the contrast is enhanced to the most extent when φ = 1.5π.In addition,the contrast is in proportion to the Rabi frequency of the microwave field with a certain relative phase.     

顺序注射HG-AFS法测定富硒农产品中无机硒和有机硒

本文建立了顺序注射氢化物发生原子荧光法测定硒的分析方法.探讨了富硒农产品中无机硒和有机硒的分离及提取方法.优化了仪器的工作条件,考察了KBH4浓度和酸介质浓度对硒原子荧光强度的影响.方法的线性范围为1～100μg/L,检出限为0.02μg/L,无机硒的回收率为95.0%～104.0%.     

硅胶-氧化铝层析柱-气相色谱法测定沉积物中邻苯二甲酸酯类有机物

建立了硅胶-氧化铝层析柱净化分离,GC—MS、GC—FID定性定量分析沉积物样品邻苯二甲酸酯类有机污染物Phthalate esters（PAEs）的方法。比较了Florisil、硅胶、氧化铝和硅胶-氧化铝层析柱对PAEs分离特征;优化了硅胶-氧化铝层析柱净化分离PAEs的条件。方法线性范围0．05～500μg/g,回收率75.3％～113．6％,相对标准偏差2．74％～12．2％,检出限0．29～1．2ng／g。内标法定量,应用于珠江口沉积物样品中PAEs测定,获得满意的结果。     

踏过等比数列的“层峦叠障”

等比数列的概念与性质、等比数列求和问题一直是高考的重要考点,可是,由于考生对概念和性质理解不透彻、考虑不全面、忽略题中的隐含条件等原因,常常出现“会而不对,对而不全”令人痛心的现象．制约学生数学成绩的提高,本文结合笔者多年的教学实践,精选学生在考试中的几个易错问题,有针对性地帮你识破命题者精心设计的陷阱,帮你踏过等比数列的“层峦叠障”,以期达到授人以渔的目的,助你成功．     

一种灵活的基于身份的签名方案

在基于身份的密钥提取过程中,使密钥生成器在私钥中嵌入随机数,从而使得密钥提取具有较好的灵活性,使得用户对一个身份可具备多个私钥,这无疑会增加密钥使用的安全性;基于这种新的密钥提取思路,给出一个基于身份的签名体制,新的密钥提取方式使得它具有更好的安全性和灵活性;新的基于身份的签名体制中具有最少对运算,因此,与类似的方案相比,其具备较好的计算效率;新签名体制的安全性依赖于k-合谋攻击问题(k-CAAP)的困难性,其在适应性选择消息和ID攻击下具备强不可伪造性,并且其安全性证明具有紧规约性.     

窄脉宽激光诱导背向选择性去除金属薄膜制备微电路(特邀)EI北大核心CSCD

为了在透明基板上制备出导电性能良好的微电路,研究了窄脉宽激光正向和背向选择性去除金属薄膜制备的微结构形貌特征,开展了纳秒激光选择性去除Cu薄膜(厚度为150 nm)的实验和温度场仿真研究,揭示了正、背面去除的烧蚀机理和材料的喷射机制。实验结果表明,当激光脉冲能量为0.270~0.542μJ,扫描速度为2 mm/s时,激光诱导背向去除金属薄膜在加工质量方面优于正向加工,其去除几何精度高,轮廓边缘平整,几乎没有溅射。采用优化后的纳秒激光加工工艺参数,激光脉冲能量为0.403μJ,扫描速度2 mm/s,扫描线间距为3μm,制备出均匀分布的铜阵列图案。在相同参数下对玻璃基板上的铜薄膜背向选择性去除,得到具有良好导电性和粘附性的微电路。     

Three-dimensional simulation method of multipactor in microwave components for high-power space application

Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain method and the panicle tracing method, such an algorithm is self-consistent and accurate since the interaction between electromagnetic fields and particles is properly modeled. In the time domain aspect, the generation of multipactor can be easily visualized, which makes it possible to gain a deeper insight into the physical mechanism of this effect. In addition to the classic secondary electron emission model, the measured practical secondary electron yield is used, which increases the accuracy of the algorithm. In order to validate the method, the impedance transformer and ridge waveguide filter are studied. By analyzing the evolution of the secondaries obtained by our method, multipactor thresholds of these components are estimated, which show good agreement with the experimental results. Furthermore, the most sensitive positions where multipactor occurs are determined from the phase focusing phenomenon, which is very meaningful for multipactor analysis and design.     

基于LBIST的纠检错电路验证方法与实现

基于逻辑内建自测试的设计原理,提出了一种针对纠检错电路进行功能自测试的方法,根据纠检错电路具有固定纠检错能力的特点,无需存储海量的比较数据,也不需要设计响应特征分析器对结果数据进行压缩处理,针对具体的纠检错电路,通过增加特别设计的注错逻辑可实现任意类型的故障注入,并根据注错信息可对结果进行预测,通过与预期结果比较,可达到验证的目的;最后,以(40,2)海明编码与解码电路为例,实现了其功能自测试结构,并对所有2⁴⁰-1种故障进行了注入与验证;结果表明使用本文的验证方法,可实现纠检错电路的自动化随机验证。