A review of bioanalytical methods for chronic lymphocytic leukemia drugs and metabolites in biological matrices

Quantitation of drugs used for the treatment of chronic lymphocytic leukemia in various biological matrices during both pre-clinical and clinical developments is very important, often in routine therapeutic drug monitoring. The first developed methods for quantitation were traditionally done on LC in combination with either UV or fluorescence detection. However, the emergence of LC with mass spectrometry in tandem in early 1990s has revolutionized the quantitation as it has provided better sensitivity and selectivity within a shorter run time; therefore it has become the choice of method for the analysis of various drugs. In this article, an overview of various bioanalytical methods (HPLC or LC–MS/MS) for the quantification of drugs for the treatment of chronic lymphocytic leukemia, along with applicability of these methods, is given.     

Synthesis of Heat-resistant Polymers by Thiol–Ene Reaction of N-Allylmaleimide Copolymers Using Glycoluril Crosslinkers with Rigid Molecular Structures

We carried out the thermal curing of the copolymers of N-allylmaleimide (AMI) and 2-ethylhexyl acrylate (2EHA) using 1,3,4,6-tetra(2-mercaproethyl)glycoluril ( G1 ), 1,3,4,6-tetra(3-mercaptopropyl)glycoluril ( G2 ), 1,3,4,6-tetraallylglycoluril ( G3 ), triallylisocyanurate (TAIC), and pentaerythritol tetrakis(3-mercaptobutyrate) (PEMB) as the crosslinkers. Based on the results for the analysis of thiol–ene reactions monitored by IR spectroscopy, it was confirmed that the curing rate significantly depended on the combination of the used crosslinkers. The insoluble fraction after curing was more than 90% for the systems using the glycoluril crosslinkers, while the conversion of the allyl groups was suppressed due to the rigid structure of these crosslinkers. The heat resistance and the mechanical properties of the crosslinked polymers were investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. For the products cured using the glycoluril crosslinkers, the glass transition temperature (T_g) and the maximum temperature of thermal decomposition (T_max) were 54–59 °C and 395–409 °C, respectively, being higher than those for the cured product prepared with PEMB and TAIC as the conventional crosslinkers. The elasticity (75–139 MPa), the maximum strength (3.0–4.1 MPa), and the adhesion strength (6.7–10.7 MPa) for the polymers cured with the glycoluril crosslinkers, determined by the mechanical tensile and single lap-shear adhesion tests, were higher than those for cured materials produced with PEMB. Thus, the thermal and mechanical properties of the maleimide copolymers were efficiently enhanced by crosslinking using the rigid glycoluril compounds. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 923–931     

In Situ Metal-Assisted Ligand Modification Induces Mn4 Cluster-to-Cluster Transformation: A Crystallography,Mass Spectrometry,and DFT Study

Dehydration of (S,S)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethane-1,2-diol (H₄L) to (Z)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethenol) (H₃L′) was found to be metal-assisted, occurs under solvothermal conditions (H₂O/CH₃OH), and leads to [Mn^II₄(H₃L)₄Cl₂]Cl₂ ⋅ 5 H₂O ⋅ 5 CH₃OH ( Mn₄L₄ ) and [Mn^II₄(H₂L′)₆(μ₃-OH)]Cl ⋅ 4 CH₃OH ⋅ H₂O ( Mn₄L′₆ ), respectively. Their structures were determined by single-crystal XRD. Extensive ESI-MS studies on solutions and solids of the reaction led to the proposal consisting of an initial stepwise assembly of Mn₄L₄ from the reactants via [MnL] and [Mn₂L₂] below 80 °C, and then disassembly to [MnL] and [MnL₂] followed by ligand modification before reassembly to Mn₄L′₆ via [MnL′], [MnL′₂], and [Mn₂L′₃] with increasing solvothermal temperature up to 140 °C. Identification of intermediates [Mn₄L_xL′_6−x] (x=5, 4, 3, 2, 1) in the process further suggested an assembly/disassembly/in situ reaction/reassembly transformation mechanism. These results not only reveal that multiple phase transformations are possible even though they were not realized in the crystalline state, but also help to better understand the complex transformation process between coordination clusters during “black-box” reactions.     

基于有序介孔碳的氯离子选择性电极的制备及其在手持传感系统中的应用

以有序介孔碳(OMC)球为离子-电子转换层,制备了固态氯离子选择性电极,构建了基于离子敏感的场效应晶体管(ISFET)的手持式传感系统,用于检测人体血清中的氯离子。优化了OMC前驱体的碳化温度,探究了OMC形貌结构对电极传感性能的影响;电极柔性化制备后考察了其在手持系统中对氯离子的检测效果。结果表明,最优条件下,电极在5.12×10^-4~1.02 mol/L的浓度范围呈现线性响应,响应斜率为60 mV/decade。该柔性电极在手持传感系统中展现出高灵敏度和重现性,可用于人体血清样品中氯离子的检测,其回收率为96.3%~104.9%。     

Influence of moisture and CO2 on the material behavior of thermoplastic elastomers for beer bottle closures

Metal closures with a polymer-based sealing for beer bottles have been known since the late nineteen-sixties. However, to what extent which parameter of the polymer sealing gasket plays a role in closure performance to keep the beer quality to a highest level possible is not fully understood. For this purpose three thermoplastic elastomer (TPE) liners were investigated by differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectrometry, dynamical mechanical analysis (DMA), scanning electron microscopy (SEM) and surface roughness in order to understand the effect of relative humidity (RH) and carbon dioxide (CO₂) on their physical and chemical properties as well as their macromolecular structures. The TPEs’ viscoelasticity in the frequency domain under different isothermal conditions was evaluated. RH and CO₂ were effective for changes in thermomechanical and surface properties. Liner C was found to have lower seal performance attributed to its relatively higher crystallinity, stiffness, weaker bond structure and rougher surface. Vibrations can lead to seal leakage in Liner B due to its higher damping behavior during production and transportation. Liner A outperforms others due to stabile behavior within the operational temperature range.     

碱金属盐催化1,2,4-三唑与α,β-不饱和酮及二酰亚胺的氮杂Michael反应

发展了一种高效的碱金属盐催化1,2,4-三唑与α,β-不饱和酮及α,β-不饱和二酰亚胺的氮杂Michael加成反应的新方法,以中等到优异的产率得到目标产物.该方法原料易得,底物普适性好,反应条件温和,易实现克级规模的制备.产物容易转化为相应的γ-氨基醇.     

Reduced graphene oxide supported copper oxide nanocomposites: An efficient heterogeneous and reusable catalyst for the synthesis of ynones, 1,3-diynes and 1,5-benzodiazepines in one-pot under sustainable reaction conditions

A greener and efficient method for the synthesis of ynones and 1,3-diynes using copper oxide nanoparticles (CuONPs) doped reduced graphene oxide (CuO@rGO) catalyst under palladium, ligand and solvent free conditions have been developed. The catalyst was subsequently utilized for the synthesis of biologically active 1,5-benzodiazepines in one pot via sequential addition of acyl chlorides, terminal alkynes and o-phenylenediamines. The methodology initially involves in situ formation of ynones which react with o-phenylenediamines in presence of ethanol to afford a wide variety of benzodiazepines. Mild reaction conditions, good to an excellent yield of the products, cheap and recyclable catalyst make this methodology environmentally benign and sustainable.     

Enhanced electronic and nonlinear optical responses of C24N24 cavernous nitride fullerene by decoration with first row transition metals; A computational investigation

The electronic (energy gap and work function) as well as electrical properties (dipole moment, polarizability, and first hyperpolarizabilities) of the first-row transition metals decorated C₂₄N₂₄ cavernous nitride fullerene were explored using DFT calculations. The transition metals are decorated at N4 cavity of C₂₄N₂₄ fullerene. According to our spin polarized computations, the most stable spin state monotonically increases to sextet for Mn@C₂₄N₂₄ and thereafter dropped off gradually to singlet state for Zn@C₂₄N₂₄ system. The findings demonstrate that transition metals can remarkably decrease the HOMO-LUMO energy gap and work function values up to 63% and 21% of bare C₂₄N₂₄, respectively. As can be seen, when the Sc and Ti metals are located above the N4 cavity of fullerene, systems of enhanced static hyperpolarizabilities (β₀) are delivered. These findings might provide an effective strategy to design high performance eletcro-optical materials based on carbon- nitride fullerene.     

单斜氧化锆表面水合和脱水的动态模拟

常用的氧化物负载金属催化剂通常在水相中制备，且在使用前常常需要经过煅烧. 因此，氧化物载体表面的水合和脱水过程对于负载型金属催化剂的真实建模至关重要. 通过第一性原理分子动力学模拟，本文考察了温和温度下无水单斜氧化锆(111)表面在显式溶剂水中的演化. 在模拟过程中，所有的双重配位桥位氧位点很快被溶剂水质子化，形成酸性羟基(HO_L)，并在锆原子上留下碱性羟基(HO^*). 这些碱性羟基(HO^*)可以与表面未解离的吸附水分子(H₂O^*$)进行活跃的质子交换，进而在表面自由扩散. 在273 K到373 K的温度范围下，第一性原理分子动力学水相模拟可以得到一种较为确定的、有代表性的平衡水合单斜氧化锆(111)表面，其表面锆原子上覆盖度(θ)为0.75. 随后，为了模拟低于800 K的温和煅烧温度下的表面脱水过程，本文使用密度泛函理论计算了表面水分子的逐步脱附自由能. 通过获得表面的脱水相图，总结了不同煅烧温度下有代表性的、部分水合的单斜氧化锆(111)表面(0.25≤θ<0.75). 这些水合单斜氧化锆(111)表面具有重要的理论意义，可以方便快捷地被应用于氧化锆催化剂及氧化锆负载金属催化剂的真实建模与模拟.     

Stability of Multiplier Ideal Sheaves

Chinese Annals of Mathematics, Series B - In the present article, the authors find and establish stability of multiplier ideal sheaves, which is more general than strong openness.