电气材料铜及铜合金中痕量杂质砷元素的氢化物发生-原子荧光光谱法测定

本文建立了氢化物发生-原子荧光光谱法测定电气材料铜及铜合金中痕量杂质元素砷的方法。通过使用L-半胱氨酸与铜基体形成络合物,抗坏血酸充分预还原砷,消除了基体干扰,并实现了铜及铜合金中痕量杂质砷的准确测定。在经过优化的实验条件下,砷的检出限为0.12 ng·m L-1,线性相关系数优于0.999,相对标准偏差小于4%。用加标回收法测定实际样品,回收率在92%到103%之间。该法操作简便,灵敏度高,无需基体预分离。     

Cu3V2O8 Nanoparticles as Intercalation‐Type Anode Material for Lithium‐Ion Batteries

Cu₃V₂O₈ nanoparticles with particle sizes of 40–50 nm have been prepared by the co‐precipitation method. The Cu₃V₂O₈ electrode delivers a discharge capacity of 462 mA h g^?1 for the first 10 cycles and then the specific capacity, surprisingly, increases to 773 mA h g^?1 after 50 cycles, possibly as a result of extra lithium interfacial storage through the reversible formation/decomposition of a solid electrolyte interface (SEI) film. In addition, the electrode shows good rate capability with discharge capacities of 218 mA h g^?1 under current densities of 1000 mA g^?1. Moreover, the lithium storage mechanism for Cu₃V₂O₈ nanoparticles is explained on the basis of ex situ X‐ray diffraction data and high‐resolution transmission electron microscopy analyses at different charge/discharge depths. It was evidenced that Cu₃V₂O₈ decomposes into copper metal and Li₃VO₄ on being initially discharged to 0.01 V, and the Li₃VO₄ is then likely to act as the host for lithium ions in subsequent cycles by means of the intercalation mechanism. Such an “in situ” compositing phenomenon during the electrochemical processes is novel and provides a very useful insight into the design of new anode materials for application in lithium‐ion batteries.     

Aspartate‐Based CXCR4 Chemokine Receptor Binding of Cross‐Bridged Tetraazamacrocyclic Copper(II) and Zinc(II) Complexes

The CXCR4 chemokine receptor is implicated in a number of diseases including HIV infection and cancer development and metastasis. Previous studies have demonstrated that configurationally restricted bis‐tetraazamacrocyclic metal complexes are high‐affinity CXCR4 antagonists. Here, we present the synthesis of Cu²⁺ and Zn²⁺ acetate complexes of six cross‐bridged tetraazamacrocycles to mimic their coordination interaction with the aspartate side chains known to bind them to CXCR4. X‐ray crystal structures for three new Cu²⁺ acetate complexes and two new Zn²⁺ acetate complexes demonstrate metal‐ion‐dependent differences in the mode of binding the acetate ligand concomitantly with the requisite cis‐V‐configured cross‐bridged tetraazamacrocyle. Concurrent density functional theory molecular modelling studies produced an energetic rationale for the unexpected [Zn(OAc)(H₂O)]⁺ coordination motif present in all of the Zn²⁺ cross‐bridged tetraazamacrocycle crystal structures, which differs from the chelating acetate [Zn(OAc)]⁺ structures of known unbridged and side‐bridged tetraazamacrocyclic Zn²⁺‐containing CXCR4 antagonists.     

Regioselective Alkylative Carboxylation of Allenamides with Carbon Dioxide and Dialkylzinc Reagents Catalyzed by an N‐Heterocyclic Carbene–Copper Complex

The alkylative carboxylation of allenamide catalyzed by an N‐heterocyclic carbene (NHC)–copper(I) complex [(IPr)CuCl] with CO₂ and dialkylzinc reagents was investigated. The reaction of allenamides with dialkylzinc reagents (1.5 equiv) and CO₂ (1 atm.) proceeded smoothly in the presence of a catalytic quantity of [(IPr)CuCl] to afford (Z)‐α,β‐dehydro‐β‐amino acid esters in good yields. The reaction is regioselective, with the alkyl group introduced onto the less hindered γ‐carbon, and the carboxyl group introduced onto the β‐carbon atom of the allenamides. The first step of the reaction was alkylative zincation of the allenamides to give an alkenylzinc intermediate followed by nucleophilic addition to CO₂. A variety of cyclic and acyclic allenamides were found to be applicable to this transformation. Dialkylzinc reagents bearing β‐hydrogen atoms, such as Et₂Zn or Bu₂Zn, also gave the corresponding alkylative carboxylation products without β‐hydride elimination. The present methodology provides an easy route to alkyl‐substituted α,β‐dehydro‐β‐amino acid ester derivatives under mild reaction conditions with high regio‐ and stereoselectivtiy.     

Microwave-Assisted Azide-Alkyne Cycloaddition in Water Using a Heterogeneous Cu-Catalyst

Several triazoles have been synthesized. They were obtained by a Cu-catalyzed cycloaddition of azides and alkynes. The reaction takes place in aqueous media under microwave irradiation using a copper catalyst based on porous glass. The products have been characterized by infrared, gas chromatography–mass spectrometry, ¹H NMR, and ¹³C NMR in addition to melting = point determination. Furthermore the in situ building of some azides and alkynes and the influence of the used metal species was investigated.     

新型含氮配体多核铜配合物的合成、晶体结构及其性能研究

以1,10-邻菲罗啉(phen)为配体,采用溶剂蒸发法在水中分别合成了羟基桥连和氯离子桥连的两个新型的含氮配体多核铜离子配合物[Cu4(phen)4(H2O)2(OH)4·(NO3)4·2H2O(1)和Cu2(phen)2Cl4(2)],其结构经元素分析和X-射线单晶衍射表征。1属三斜晶系,空间群P-1,晶胞参数a=10.143 0(9),b=11.900 1(11),c=12.629 9(13),α=111.060(2)°,β=91.070 0(10)°,γ=110.920(2)°,Z=1,V=1 309.8(2)3,F(000)=692。2属单斜晶系,空间群Cc,晶胞参数a=9.860 9(8),b=17.852 9(13),c=13.412 3(15),β=106.583(11)°,Z=4,V=2 263.0(4)3,F(000)=1 256。用荧光光谱和热分析分别研究了1和2的荧光性质和热稳定性,结果表明:在310 nm激发波长激发下,与phen相比,1和2的荧光发射峰分别发生红移和蓝移,λem分别位于451 nm和374 nm。1和2的初始分解温度分别为298℃和300℃。     

Alkyne–azide cycloaddition catalyzed by a dinuclear copper(I) complex

A novel dinuclear copper complex Cu^I₂(pip)₂ was used as a catalyst for alkyne–azide cycloaddition (CuAAC) reaction. High yields (95–99%) were obtained for various substrates at a low loading of 0.2 mol %. The unique structure, high stability of the dinuclear structure in solution, and easy preparation make this complex not only a high-efficiency catalyst but also a model for understanding the mechanism of the CuAAC reaction.     

Synthesis and Crystal Structure of an Anionic Linear Trinuclear Copper(Ⅱ) Complex Containing 2-Thenoyltrifluoroacetonato and Acetato Ligands

A novel anionic trinuclear linear copper(Ⅱ) complex {[Et3NH][Cu1.5(CH3COO)-(TTA)3]}2(1,TTA = 2-thenoyltrifluoroacetonate) has been synthesized in a direct reaction involving copper(Ⅱ) acetate monohydrate,TTA and excess triethylamine base in dichloromethane solvent.Green colored X-ray quality crystals of 1 were grown from n-hexane solvent at room temperature.The data were collected at 100 K.Compound 1 crystallizes in the monoclinic P21/n space group(a = 11.2141(8),b = 19.0965(13),c = 17.3680(14) ,β = 90.225(2)°,V = 3719.3(5) 3,Mr = 1840.14,Dc = 1.643 Mg/m3,F(000) = 1866,μ = 1.129 mm-1 and Z = 2).The asymmetric unit of 1 contains two copper atoms,one of which lies on a crystallographic inversion center with 50% occupancy.