FT合成沉淀Fe／Cu／K催化剂有效因子的计算Ⅰ．工业颗粒催化剂有效因子的计算

用包括水抑制作用的动力学方程，根据建立的反应扩散模型和ＦＴ合成化学计量关系，计算了工业原颗粒ＦＴ合成沉淀Ｆｅ／Ｃｕ／Ｋ催化剂在工业操作条件下的有效因子。根据不同的产物组成，建立了三种化学计量关系式，比较了气相反应和气液反应的有效因子，确立了ＦＴ合成沉淀Ｆｅ／Ｃｕ／Ｋ催化剂有效因子的计算方法。在ＦＴ合成反应条件下，产物蜡充满了催化剂的微孔，各组分在蜡中的扩散系数要比纯气相中的扩散系数小得多。在工况操作条件下（５２３Ｋ，２．５ＭＰａ，５００ｈ￣（－１），尾气循环比３．０），工业原颗粒（ｄ＿ｐ＝２．５ｍｍ，ｌ＿ｐ＝５～１０ｍｍ）催化剂的实际有效因子是纯气相反应的一半左右，计算的平均有效因子分别为０．４０和０．４２。     

Fischer-Tropsch synthesis over cobalt catalysts supported on modified SiO2 with mesoporous silica

SiO₂ was modified by hexagonal mesoporous silica to form a mixture with meso-/macroporous sizes and used as support of Co catalysts for Fischer-Tropsch synthesis in a slurry phase. A synergistic effect on the activity of Co catalyst was found. The catalytic properties are related to the state of surface Co and the character of support.     

CO加氢制备低碳烯烃Fe基、Co基催化剂研究进展

CO加氢制备低碳烯烃是非石油路线获得烯烃的重要反应,其反应路线有直接法和间接法。直接法制备低碳烯烃具有反应路线短、能源利用率高、经济高效等优势。综述了近年来Fe基催化剂、Co基催化剂在CO直接制备低碳烯烃中的研究进展。分析认为：费托合成过程产物选择性遵循Anderson-Schulz-Flory（ASF）分布规律,助剂和载体的使用一定程度提高Fe基、Co基催化剂的低碳烯烃选择性。     

助剂对Co/Al2O3催化剂浆态床费托合成反应性能影响

考察了ZrO₂、Ru或Pt助剂对Co/Al₂O₃催化剂结构及浆态床费托合成反应性能的影响。实验结果表明,添加ZrO₂助剂可阻止或降低难还原铝酸钴的形成、促进催化剂的还原、提高Co/Al₂O₃催化剂对费托合成反应的催化活性、降低甲烷选择性并提高C₅₊烃选择性。H₂-TPR表征结果表明,少量Ru或Pt助剂均能降低Co-ZrO₂/Al₂O₃催化剂中钴物种还原温度(Co₃O₄→CoO和CoO→Co⁰),提高催化剂的还原度,催化剂呈现出良好的CO加氢反应活性。此外,催化剂组分间浸渍次序对费托合成反应性能有重要影响,载体γ-Al₂O₃先浸渍Zr组分,可有效抑制难还原化合物形成;Co、Ru组分共浸渍加强了Co和Ru组分密切接触程度,更利于钴物种的还原;Co、Pt组分依次浸渍更利于活性组分的均匀分布,催化剂具有最佳的费托合成反应性能。     

焙烧及还原温度对 Co-Pt-ZrO2/γ-Al2O3催化剂费托合成反应性能的影响

采用浸渍法制备了Co-Pt-ZrO₂/γ-Al₂O₃催化剂,对其进行了BET、XRD和TPR等表征,并在浆态床反应器上考察了焙烧温度和还原温度对催化剂费托合成反应性能的影响。结果表明,焙烧温度过高,容易造成Co物种和载体间的相互作用增强,使部分氧化钴颗粒聚集或烧结,导致催化剂的F-T合成反应活性和C₅₊烃选择性降低。还原温度较低时,钴物种不能充分还原,CO加氢活性低,甲烷选择性高,重质烃选择性低;还原温度过高,则可能造成活性物种的烧结,反而降低了催化剂的活性和重质烃选择性。在原料气n(H₂)/n(CO)=2.0、483 K、2.4 MPa和空速3.6 L/(gcat·h)的条件下,31.08%Co～0.11%Pt～7.16%ZrO₂/Al₂O₃催化剂在673 K焙烧。纯H₂下653 K还原后,其费托性能最佳;CO转化率为27.0%,C₅₊的选择性为83.0%。     

还原温度对Fe-Mo催化剂性质及F-T合成性能的影响

研究了还原温度对Fe-Mo催化剂性质及费托(F-T)合成性能的影响。采用N₂物理吸附、X射线衍射、穆斯堡尔谱和H₂程序升温脱附技术对催化剂进行了表征。结果表明,随还原温度升高,金属铁晶粒粒径增大,金属铁上的H₂吸附量先升后降;催化剂还原度提高,反应态催化剂碳化铁含量递增。催化剂F-T合成性能在280 ℃、1.5 MPa、2 000 h^-1、合成气H₂/CO比为2.0条件下在固定床反应器中测试。反应结果表明,随还原温度提高,催化剂接近稳态时的活性和重质烃选择性(C₅⁺)先升后降,而甲烷选择性则先降后升。350 ℃还原催化剂具有最佳F-T合成反应性能。     

费托合成反应中纳米铁催化剂上La和Ba助剂的协同效应(英文)

Effect of promoters such as Barium and Lanthanum has been investigated on the conventional nanostructured iron catalyst in Fischer-Tropsch synthesis (FTS). The nanosized iron-based catalysts were prepared by a microemulsion method with the general formulation of 100Fe/4Cu, 100Fe/4Cu/2La, 100Fe/4Cu/ 1La/1Ba, and 100Fe/4Cu/2Ba. The phase, structure, and morphology of the catalysts were characterized by X-ray diffraction, N2 adsorption, transmission electron microscopy, temperature-programmed desorption of CO2, and temperature- programmed reduction. The results indicated that the addition of promoters could improve the activity of Fe catalysts for FTS and WGS (water-gas shift reaction) and lower the gas fraction at the outlet. In addition, both Ba- and La-promoted Fe catalysts exhibit the highest activity due to the synergetic effect.     

无溶剂路线制备分子筛封装的钴基催化剂及其在费托合成制汽油反应中的应用（英文）

自2012年浙江大学肖丰收教授(J.Am.Chem.Soc.,2012,134,15173-15176)首次提出无溶剂法合成分子筛以来,该路线已备受关注.无溶剂合成分子筛方法具有废液少、产率高、安全系数高等优点.本文针对合成气经费托路线(FTS)一步法制备富含异构烷烃汽油馏分的研究,通过无溶剂研磨法制备了分子筛封装金属催化剂.一般来说,烷烃异构化催化剂的性能主要取决于分子筛的孔道结构及其酸性,其次是分子筛晶粒大小、结晶度和表面性质等因素.本文对比了三种具有相同拓扑结构的MFI分子筛(Silicalite-1,HZSM-5和NaZSM-5)对汽油和异构烷烃选择性的影响规律.结果显示,在CO转化率(~30%)近似相同的情况下,具有最弱酸性的Silicalite-1封装的Co颗粒表现出最高的汽油选择性(~70%)和异构烷烃选择性(~30.7%).这意味着正构烷烃异构化反应只需要弱酸即可实现,较强的酸性则会使其发生过度裂解反应.Py-IR谱图显示,Silicalite-1在1445 cm-1附近的L酸是区别于NaZSM-5和HZSM-5的一个重要酸性位,可作为FTS路线制备富含异构烷烃汽油的一个关键参数.另外,与封装型(Co@MFI)催化剂相比,浸渍型催化剂(Co/MFI)的汽油选择性明显偏低,可能与金属活性位与分子筛酸性位之间的距离有直接关系.因此,无溶剂合成分子筛是一条具有前景和适宜放大的催化剂合成路线.对于合成气经费托路线制取富含异构烷烃汽油反应,正构烷烃在分子筛催化剂上的裂解和异构化之间的竞争反应是核心问题.未来有待突破的研究方向包括:(1)多支链异构烷烃的合成,目前对于有效调控多支链烷烃的生成关注较少;(2)反应路线的设计,合成气经甲醇路线,联合甲醇制汽油(MTG)反应获得异构烷烃;(3)裂解反应的抑制;(4)分子筛孔道/笼对异构烷烃选择性的调控机制.     

Deactivation studies of nano-structured iron catalyst in Fischer-Tropsch synthesis

A nano-structured iron catalyst for syngas conversion to hydrocarbons in Fischer-Tropsch synthesis (FTS) was prepared by micro-emulsion method. Compositions of bulk iron phase and phase transformations of carbonaceous species during catalyst deactivation in FTS reaction were characterized by temperature-programmed surface reaction with hydrogen (TPSR-H2), and XRD techniques. Many carbonaceous species on surface and bulk of the nano-structured iron catalysts were completely identified by combined TPSR-H2 and XRD spectra and which were compared with those recorded on conventional co-precipitated iron catalyst. The results reveal that the catalyst deactivation results from the formation of inactive carbide phases and surface carbonaceous species like graphite, and it will be increased when the particle size of iron oxides was reduced in FTS iron catalyst.     

Fischer-Tropsch synthesis by nano-structured iron catalyst

Effects of nanoscale iron oxide particles on textural structure, reduction, carburization and catalytic behavior of precipitated iron catalyst in Fischer-Tropsch synthesis (FTS) are investigated. Nanostructured iron catalysts were prepared by microemulsion method in two series. Firstly, Fe2O3, CuO and La2O3 nanoparticles were prepared separately and were mixed to attain Fe/Cu/La nanostructured catalyst (sep-nano catalyst); Secondly nanostructured catalyst was prepared by co-precipitation in a water-in-oil microemulsion method (mix-nano catalyst). Also, conventional iron catalyst was prepared with common co-precipitation method. Structural characterizations of the catalysts were performed by TEM, XRD, H2 and CO-TPR tests. Particle size of iron oxides for sep-nano and mix-nano catalysts, which were determined by XRD pattern (Scherrer equation) and TEM images was about 20 and 21.6 nm, respectively. Catalyst evaluation was conducted in a fixed-bed stainless steel reactor and compared with conventional iron catalyst. The results revealed that FTS reaction increased while WGS reaction and olefin/paraffin ratio decreased in nanostructured iron catalysts.