单晶硅晶格间距的测量技术进展及应用

单晶硅晶格间距是许多重要物理常数测量的基础。本文介绍了硅晶格间距测量技术的发展历程,包括X射线干涉仪直接测量和晶格比较仪间接测量两种方法,以及影响测量结果不确定度的关键因素。得益于晶格间距测量的进展,在纳米尺度,硅晶格间距被国际计量局(BIPM)批准成为新的米定义复现形式。最后介绍了硅晶格在计量学中的应用,以及基于硅晶格实现纳米几何量测量的溯源体系的研究趋势。     

基于5-磺基水杨酸的单、双核铜(Ⅱ)三元混配配合物的合成及晶体结构

以5-磺基水杨酸和咪唑衍生物为配体合成了单核、双核结构的三元混配Cu(Ⅱ)配合物:[Cu(H₂biim)(Hssal)(H₂O)₂]·H₂O(1)和{[Cu(MeHbiim)(Hssal)(H₂O)]·0.5H₂O}₂(2)(H₃ssal=5-磺基水杨酸,H₂biim=2,2’-联咪唑,MeHbiim=N-甲基-2,2’-联咪唑),并利用元素分析、红外光谱、紫外-可见光谱、X-射线单晶衍射及热重分析等技术手段对其结构进行了表征。单晶结构解析表明配合物1属于单斜晶系,P2₁／C 空间群,Cu(Ⅱ)离子与1个5-磺基水杨酸根、2个水分子以及1个联咪唑分子形成五配位四角锥构型的单核配合物结构。配合物2属于正交晶系,P2(1)2(1)2(1)空间群,双核Cu(II)离子分别处于五配位四角锥和四配位平面四边形的几何构型的配位环境中,与配合物1不同,5-磺基水杨酸采取μ₂双-单齿配位模式。荧光光谱分析表明配合物2具有较强的荧光性。     

棒状PANI/TiO2纳米复合材料的制备及光催化性能研究

通过共混法和原位氧化聚合法成功制备了棒状聚苯胺/TiO2纳米复合材料,通过SEM、XRD、FT-IR、TGA、TEM、紫外-可见漫反射光谱等测试对其进行表征.并以罗丹明B溶液为模拟污染物,在可见光条件下,棒状PANI/TiO2纳米复合材料的催化降解效率与纯PANI和TiO2相比明显提高.另外,对两种不同方法合成的PANI/TiO2纳米复合材料的光催化性能进行对比,结果表明原位氧化聚合法制得的复合材料,由于TiO2在复合材料中的均匀分布及其与PANI的协同效应,光催化降解率可达91.11;.     

CoP纳米片制备及其电催化产氢性能的研究

高稳定性的催化剂对于规模化电催化产氢起着关键的作用.因此,采用简单的方法合成CoP纳米片,其表现出优越电催化活性和稳定性. CoP纳米片采用水热法和在氩气中磷化法制备的,纳米片的厚度为100～300 nm.CoP纳米片在0.5 M H2SO4的电解质中,表现出良好的电化学产氢性能,起始过电为～75 mV,塔菲尔斜率为～39. 67 mV/decade,当电流密度为10 mA· cm-2,过电压为～125 mV,经过1000次的循环后,保持良好的稳定性能.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

改性二氧化硅纳米颗粒提高二氧化碳泡沫稳定性的研究

通过纳米二氧化硅的硅烷化改性, 使其在高矿化度盐水中可以稳定存在的前提下, 研究了改性纳米颗粒与阳离子表面活性剂十二烷基三甲基氯化铵混合体系的溶液稳定性及协同稳定CO₂泡沫的效果. 研究结果表明, 无机盐离子对改性纳米颗粒与阳离子表面活性剂间的静电吸引力具有屏蔽作用, 且矿化度越高, 屏蔽效果越明显, 从而混合溶液更易于在高盐水中稳定; 纳米颗粒表面的活性剂吸附层受二者浓度的影响, 进而影响了颗粒的亲/疏水性; 当混合体系中的表面活性剂浓度低于临界胶束浓度(CMC)时, 混合溶液与CO₂的界面张力高于单独活性剂溶液, 而当活性剂浓度高于CMC时, 对CO₂-溶液界面张力几乎无影响, 最低界面张力可降至6 mN/m左右; 改性纳米颗粒的加入可以进一步提高CO₂体相泡沫半衰期一倍以上, 但受二者浓度比例的影响; 纳米颗粒的加入有效提高了多孔介质中泡沫的表观黏度, 最大增幅由20 mPa·s增至55 mPa·s左右, 泡沫黏度增加接近3倍, 增强了CO₂泡沫驱的封堵作用.     

大斯托克斯位移远红光至近红外荧光探针用于检测肝损伤过程中过氧化亚硝酸盐的动态变化

肝损伤是影响公众健康的重大问题之一, 已经引起了人们越来越多的关注. 而过表达的过氧化亚硝酸盐(ONOO^?)在肝损伤等疾病的发病机制中起着重要作用, 被认为是一种与早期肝损伤密切相关的生物活性分子. 因此, 为了探究ONOO^?在肝损伤过程中的作用, 开发可以实现肝损伤过程中ONOO^?高选择性和实时检测的分析方法具有重要意义. 本文报道了一种具有大斯托克斯位移的远红光至近红外(FR-NIR)ONOO^?荧光探针. 由于该探针具有大的斯托克斯位移, 可以有效消除光谱重叠和自吸收的干扰, 从而显著提高成像的信噪比. 此外, 该探针对ONOO^?具有高的灵敏度(检出限为25.8 nmol/L)和良好的选择性, 被成功用于药物诱导肝损伤过程中ONOO^?信号的成像检测.     

可用于连续识别Cu^2+和阴离子、中性分子荧光探针的研究进展

铜(Cu)含量的高低直接影响着生命体的正常运转和自然体系的平衡.检测铜离子的方法多种多样,其中具有较高敏感度和选择性的荧光化学传感器应用更加广泛.综述了以Cu^2+为基的荧光化学传感器通过"替换"法实现了对阴离子S^2-, CN^-, H2PO4^-, PPi和I^-以及中性分子ATP、ADP和生物硫醇等的连续识别的研究进展.     

基于PSO-HJ算法的多无人机协同航迹规划方法

针对多无人机协同航迹求解计算量大、难以收敛等问题,提出了一种基于粒子群优化和Hook-Jeeves (PSO-HJ)搜索算法相融合的多无人机时间协同三维航迹规划方法。首先,建立了单无人机航迹规划求解模型。然后,通过对适应度评价函数值低的粒子引入Hooke-Jeeves搜索算法,提高了粒子多样性,改善了航迹规划算法收敛性;对不满足约束的粒子引入约束违反度函数,基于比较准则提出了一种新的粒子评价机制,促进粒子搜索位于约束边界的最优解,加快了航迹规划算法的计算效率。最后,设计了一种多无人机时间协同航迹规划求解算法,利用PSO-HJ算法先分别求解单无人机航迹信息,通过多无人机集中航迹规划层协调到达时间实现协同航迹规划。仿真结果表明,PSO-HJ算法的精度比量子粒子群(QPSO)算法精度提高了20.85%,比PSO算法精度提高了58.14%,更适用解决实际复杂的多机协同规划问题。