非线性弹性基础上矩形板热后屈曲分析

给出非线性弹性基础上矩形板在均匀和非均匀（抛物型）热分布作用下的后屈曲分析。采用摄动——Ｇａｌｅｒｋｉｎ混合法给出完善和非完善矩形板热屈曲载荷和热后屈曲平衡路径。数值计算结果表明，非线性弹性基础上矩形板具有不稳定的热后屈曲平衡路径，且对初始几何缺陷是敏感的     

ON THE GENERAL EQUATIONS OF AXISYMMETRIC PROBLEMS OF IDEAL PLASTICITY

In this paper, introducing a velocity potential, we reduce the fundamental equations of axisymmetric problems of ideal plasticity to two nonlinear partiCal differential equations. From these equations we discuss compatibilitg of Harr-Kármán hypothesis with von Mises yield criterion and the associated flow law.     

带压电层的混合层合板的自由振动和动力响应

基于Reddy高阶剪切变形理论和广义Kármán型方程,用双重Fourier级数展开法求得了四边简支带压电层的混合层合剪切板的自由振动及动力响应的解析解,分析中考虑了热/机/电荷载共同作用,并讨论了温度变化、控制电压、铺层方式对固有频率及动力响应的影响。     

PERTURBATION ANALYSIS FOR THE POSTBUCKLING OF RECTANGULAR ORTHOTROPIC PLATES

In this paper,applying perturbation method to von Kármán-type onlinear largedeflection equations of orthotropic plates by taking deflection as perturbation parameter.the postbuckling behavior of simply supported rectangular orthotropic plates under in-plane compression is investigated.Two types of in-plane boundary conditions are nowconsidered and the effects of initial imperfections are also studied.Numerical results arepresented for various cases of orthotropic composite plates having different elasticproperties.It is found that the results obtained are in good agreement with those ofexperiments.     

湿热环境中复合材料层合圆柱薄壳屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响。基于细观力学模型复合材料性能与湿度和温度变化有关。壳体控制方程基于经典层合壳理论,并包括湿热效应。壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径。分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响。数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为。讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响。     

Postbuckling of pressure-loaded shear deformable laminated cylindrical panels

IntroductionInrecentyears,fiber_reinforcedcompositelaminatedpanelshavebeenwidelyusedintheaerospace,marine ,automobileandotherengineeringindustries .Theproblemofbucklingandpostbucklingofcylindricalpanelsunderaxialcompressionortorsionhasbeenextensivelystudied .Incontrast,theliteratureoncylindricalpanelsunderpressureloadingisrelativelyspares.Thesestudiesincludealinearbucklinganalysis (Singeretal.[1]) ,anonlinearbucklinganalysi(YamadaandCroll[2 ]) ,anelastoplasticbucklinganalysisusingreducedstif…     

KRMN-TYPE EQUATIONS FOR A HIGHER-ORDER SHEARDEFORMATION PLATE THEORY AND ITS USE IN THE THERMAL POSTBUCKLING ANALYSIS

I.IntroductionCompositelaminatedplatesareu'idel}'usedinthenuclear.petrochemicalandaerospaceindustries.Theseplatesmayhavesignificantalldunavoidableinitialgeometricimperfections.Duetoboundaryconstraints.varyingtemperatureend'ironmentst}'picall}'inducestress…     

非完善加筋圆柱壳在外压和热荷载共同作用下的后屈曲

基于壳体屈曲的边界层理论,本文给出有限长加筋圆柱壳在侧向外压和均布热荷载共同作用下的后屈曲分析。分析中同时考虑壳体非线性前屈曲变形,大挠度和初始几何缺陷的影响。肋条的处理采用“平均刚度”法。采用奇异摄动方法导得壳体屈曲载荷关系曲线和后屈曲平衡路径,并给出完善和非完善,纵向加筋或环向加筋圆柱壳数值算例。     

Elasto-plastic analysis for the buckling and postbuckling of rectangular plates under uniaxial compression

Full-range analysis for the buckling and postbuckling of rectangular plates under in-plane compression has been made by perturbation technique which takes deflection as itsperturbation parameter.In this paper the effects of initial geometric imperfection on the postbuckling behaviorof plates have been discussed.It is seen that the effect of initial imperfection on the inelasticpostbuckling of plates is sensitive.By comparison,it is found that the theoretical results ofthis paper are in good agreement with experiments.     

Buckling and postbuckling behavior of antisymmetrically angle-ply laminated composite plates

The buckling and postbuckling behaviors of perfect and imperfect antisymmetricallyangle-ply laminated composite plates under uniaxial compression have been studied byperturbation technique which takes deflection as its perturbation parameter.In this paper,the effects of in-plane boundary conditions,angles,total number oflayers and initial geometric imperfection on the postbuckling behavior of laminated plateshave been discussed.