载体对Au-Pd双金属催化剂加氢脱硫性能的影响

研究了Al_2O_3,TiO_2-Al_2O_3等载体对Au-Pd双金属催化剂的噻吩加氢脱硫性能的影响,并运用XRD,TPD,BET,TPR等手段对Au-Pd双金属催化剂进行了表征.结果表明,Au-Pd/TiO_2-Al_2O_3催化剂有较好的噻吩加氢脱硫反应活性和稳定性,与Au-Pd/Al_2O_3催化剂相比,Au-Pd/TiO_2-Al_2O_3催化剂有较高的酸密度和酸强度、活性表面积、H_2及CO的吸附量.     

噻吩加氢脱硫和四氢萘催化加氢反应中的载体和助剂的影响

 为了更好地认识加氢脱硫和催化加氢反应中的载体影响和助剂效应，在同样的催化剂制备方法及反应条件下，研究了噻吩加氢脱硫（HDS）和四氢萘催化加氢（HYD）反应．结果表明，对于无助剂的Mo和W催化剂，载体对催化活性的影响顺序为TiO2－Al2O3＞ZrO2＞Al2O3．助剂的添加改变了催化剂活性顺序．Ni助剂催化剂的活性明显高于Co助剂催化剂．ZrO2担载的添加Ni的Mo和W催化剂分别获得了最佳的HDS和HYD活性．然而，添加Pt的Mo和W催化剂其HDS和HYD活性仅是Pt与Mo（W）二者的加和，Pt与Mo（W）之间没有协同效应．先将担载的Mo和W预硫化再将助剂引入体系的催化剂制备方法可以避免Ni和Co过早硫化形成类硫化镍（或硫化钴）物相，与采用螯合物分子方法制备的催化剂间有一定的相似性．     

赖氨酸修饰壳聚糖磁性超微载体的制备和表征

本文设计并合成了良好水溶性的赖氨酸修饰壳聚糖,并对制备工艺进行了优化.产物通过红外(FTIR)和核磁(1H-NMR)进行了表征,并将其作为壳层材料制备了赖氨酸修饰壳聚糖磁性超微载体.通过光电能谱(XPS)、透射(TEM)、激光粒度仪、X射线衍射(XRD)、磁性能测试(VSM)对载体进行了表征.结果表明,制备的赖氨酸修饰壳聚糖磁性超微载体表面带有大量的氨基(-NH2),粒径分布较为均一(100nm左右),形貌较为规则,并具有良好的超顺磁性,因而该载体具有更加良好的性能.     

玻璃基质微流控芯片用于DNA片段的分离和C677T基因突变的快速检测

基于微加工方法,在一般实验条件下,成功地制备了玻璃芯片。利用水溶性聚合物对玻璃通道进行动态修饰,从而抑制了DNA分子的吸附作用,并成功地用于DNA片段的分离和四氢叶酸还原酶基因(MTHFR)中C677T的突变检测。     

基团的电子效应与单取代苯对位^1H,^13C的化学位移

基团的电子效应与单取代苯对位１Ｈ、１３Ｃ的化学位移＊韩长日冯娇杨钟照平（海南师范学院化学系海口５７１１５８）关键词１Ｈ的化学位移１３Ｃ的化学位移基团电负性共轭效应引言在１Ｈ、１３Ｃ核磁共振谱中，化学位移值的大小主要取决于屏蔽作用的大小，而屏蔽作用的大...     

Synthesis of Thiourea Derivatives on Soluble Polymeric Support

A modified poly(ethylene glycol) (PEG) has been developed as the soluble polymeric supports for liquid phase synthesis of novel thiourea derivatives.In each step of the sequence,the PEG-bound products were precipitated in cold Et2O and the unreacted materials and by-products were removed by simple filtration.The progress of reaction,purity of the isolation and the structure of the PEG-bound products were easily monitored by TLC,IR and ^1H NMR spectra.Representative thiourea derivatives were obtained in moderate yields with excellent purity from this modified PEG-bound product by the cleavage with 50% TFA/H2O.     

CO2部分氧化乙烷制乙烯Pd—Cu／MoO3—SiO2催化剂的研究

用化学吸附－红外光谱、化学吸附－程序升温脱附（ＴＰＤ）和微型反应技术研究了Ｐｄ－Ｃｕ／ＭｏＯ３－ＳｉＯ２（ＭｏＳＯ）催化剂对ＣＯ２和乙烷的吸附活化和部分氧化反应性能．结果表明，乙烷以Ｃ—Ｈ键中的Ｈ吸附于ＭｏＳＯ载体表面ＭｏＯ键的端基氧上；Ｐｄ－Ｃｕ／ＭｏＳＯ催化剂对ＣＯ２有良好的化学吸附活化性能，ＣＯ２的吸附除有线式吸附态和剪式吸附态外，还有一种新的卧式吸附态；Ｐｄ－Ｃｕ／ＭｏＳＯ催化剂的晶格氧参与了化学反应．探讨了在Ｐｄ－Ｃｕ／ＭｏＳＯ催化剂上ＣＯ２的部分氧化乙烷反应机理     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

Ti2(OMe)4/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换法制备了SiO2负载的Ti2(OMe)4双核桥联配合物催化剂，用IR、TPD和微反技术考察了催化剂的表面构造及CO2和CH3OH在催化剂表面上的化学吸附和反应性能。结果表明：双核桥联配合物Ti2(OMe)4以Ti-O-Si键锚定在SiO2表面上；CO2在催化剂表面存在桥式和甲氧碳酸酯基两种吸附态，其中甲氧碳酸酯基吸附态是生成DMC的关键物种；CH3OH在催化剂上只有一种分子吸附态。在150℃以下，CO2和CH3OH在Ti2(OMe)4/SiO2催化剂表面上高选择地生成碳酸二甲酯。     

邻苯二胺合钴氧合反应的研究Ⅰ 水溶液中配合物及其氧合配合物稳定常数的测定

自１９３８年Tsumaki报道犤１犦氧载体以来，这方面的研究已有很大进展犤２犦，只是理论研究居多。氧载体的氧合常数是氧载体研究中的一个重要参数，它的测定是氧载体研究中的一项重要内容，用pH电位法测定氧载体的氧合常数已有研究报道犤２～４犦，作者在研究中发现，邻苯二胺合钴（o－Phdn－Co）配合物在固相和水溶液中与O２反应时表现出很大差异，其反应产物的组成比分别为液相配合物Co∶O２＝２∶１，而固相配合物Co∶O２＝１∶２，为究其成因和进行理论探讨，有必要先测定其氧合常数。由于o－Phdn－Co配合物的配位常数也未见文献…