Surface passivation in n-type silicon and its application in silicon drift detector

Based on the surface passivation of n-type silicon in a silicon drift detector(SDD), we propose a new passivation structure of SiO2/Al2O3/SiO2 passivation stacks. Since the SiO2 formed by the nitric-acid-oxidation-of-silicon(NAOS)method has good compactness and simple process, the first layer film is formed by the NAOS method. The Al2O3 film is also introduced into the passivation stacks owing to exceptional advantages such as good interface characteristic and simple process. In addition, for requirements of thickness and deposition temperature, the third layer of the SiO2 film is deposited by plasma enhanced chemical vapor deposition(PECVD). The deposition of the SiO2 film by PECVD is a low-temperature process and has a high deposition rate, which causes little damage to the device and makes the SiO2 film very suitable for serving as the third passivation layer. The passivation approach of stacks can saturate dangling bonds at the interface between stacks and the silicon substrate, and provide positive charge to optimize the field passivation of the n-type substrate.The passivation method ultimately achieves a good combination of chemical and field passivations. Experimental results show that with the passivation structure of SiO2/Al2O3/SiO2, the final minority carrier lifetime reaches 5223 μs at injection of 5×10¹⁵ cm^-3. When it is applied to the passivation of SDD, the leakage current is reduced to the order of nA.     

激光能量对反钙钛矿GaCMn_3薄膜结构与物性的影响

本文采用脉冲激光沉积方法在LaAlO3(001)单晶衬底上制备了反钙钛矿GaCMn3薄膜,通过控制制备过程中脉冲激光的能量,研究了不同激光能量条件对GaCMn3薄膜结构与物理性能的影响.分别利用X射线衍射仪、原子力显微镜、超导量子干涉仪和物理性能测试系统,对所制备的薄膜的晶体结构、表面形貌和磁性、电输运性质进行了研究.结果表明,制备的样品均为具有多个晶面取向的反钙钛矿薄膜,且薄膜结构和物性明显随制备激光能量的变化而变化.当激光能量为450mJ时,制备的薄膜多晶面取向性最弱,结晶性和表面形貌最优良.实验所得的薄膜均表现出顺磁-铁磁-反铁磁相转变,然而转变过程比块材较平缓,同时薄膜的电阻率并未表现出块材中的突变特征,我们推测该现象很可能是由衬底的应力及衬底的晶格膨胀对薄膜反常晶格变化的抑制作用造成的.     

中学化学必修教材中“离子知识”的编排研究

电解质、电离、离子反应等一系列"离子知识"有其自身的发展逻辑,学生学习离子知识的进程并不同于科学发展的进程。人教版、苏教版《化学1》教材对于离子知识的编排都较好地符合知识的逻辑顺序、学生的认知顺序和学生的心理发展顺序相结合的要求。     

Tf2NH-catalyzed,highly regio-and stereo-selective synthesis of trisubstituted alkenes and indane derivatives from benzylic alcohols and alkenes

A reaction of benzylic alcohols with alkenes has been developed in the presence of bis(trifluoromethane)sulfonimide for the synthesis of trisubstituted alkenes and indane derivatives with high stereoselectivity.In general,benzylic alcohols react with 1,1-diaryl alkenes to afford trisubstituted alkenes,and the reaction with 1,2-disubstituted and trisubstituted alkenes affords indane derivatives through a [3 + 2] annulation reaction.     

激光熔覆Al2O3/Fe901复合涂层的强化机制及耐磨性

为提高金属材料表面涂层的耐磨性,采用激光熔覆工艺制备了Al_2O_3增强Fe901金属陶瓷复合涂层,研究了Al_2O_3陶瓷增强相对Fe基熔覆层组织与性能的影响。利用扫描电镜和X射线衍射仪检测了复合涂层的微观组织和物相;采用显微硬度仪和摩擦磨损试验机分析了复合涂层的显微硬度与耐磨性。结果表明:Fe901涂层的组织以柱状枝晶和等轴枝晶为主,添加的Al_2O_3可促使涂层组织转变为均匀的白色网状晶间组织及其包裹的细小黑色晶粒;复合涂层中的Al_2O_3陶瓷颗粒表面发生微熔,与Fe、Cr结合生成Fe3Al及(Al,Fe)4Cr金属间化合物,起到增加Al_2O_3陶瓷颗粒与金属黏结相结合强度的作用;当Al_2O_3陶瓷颗粒的质量分数为10%时,复合涂层的显微硬度较Fe901涂层增加了16.4%,复合涂层的摩擦磨损质量损失较Fe901涂层降低了50%;添加适量的Al_2O_3陶瓷有助于提高涂层的显微硬度及耐磨性。     

棒状LiZnPO4的低温合成与表征

LiZnPO₄的性能与其形貌密切相关,其合成常用的固相法和水热法均无控制其微观形貌的优势。 本文采用改进的沉淀法成功合成了具有棒状结构的LiZnPO₄。 利用热重-差热分析仪(TG-DSC)、X射线衍射仪(XRD)、傅里叶变换红外光谱(FTIR)以及场发射扫描电子显微镜(FE-SEM)等技术研究了LiZnPO₄形成过程、晶相组成、微观结构和形貌。 同时探究了合成方法、煅烧温度、煅烧时间、酸的种类对LiZnPO₄形貌的影响。 结果表明,相比较于固相法,以醋酸为原料的改进沉淀法不仅可以有效降低LiZnPO₄的合成温度至500 ℃,而且很容易控制棒状LiZnPO₄的形成。 在600 ℃下煅烧2 h后可以获得分散性良好、横截面为矩形、直径约为2 μm的规则棒状LiZnPO₄。 此外,对比颗粒状LiZnPO₄和棒状LiZnPO₄的光响应能力,发现棒状LiZnPO₄的光响应能力明显增强。