C02（CO）8催化苯乙烯氢酯基化制α-苯基丙酸酯研究

以Co2（CO）8为催化剂,对苯乙烯与CO及甲醇氢酯基化反应制α-苯基丙酸甲酯的反应进行了研究,并根据实验结果提出了可能的催化反应机理．考察了催化剂用量、配体、溶剂、CO压力及反应温度等因素对氢酯基化反应的影响．结果表明：以甲苯为溶剂,在n（Co2（CO）8）／n（苯乙烯）=0．06,吡啶为配体且n（吡啶）／n（Co）=2,CO压力6．0MPa、反应温度95℃的较佳条件下反应12h,苯乙烯的转化率接近100％,α-苯基丙酸甲酯的收率达到89．07％,异正比24．35．     

Poly(sodium styrene sulfonate)-b-poly(methyl methacrylate) diblock copolymers through direct atom transfer radical polymerization: Influence of hydrophilic–hydrophobic balance on self-organization in aqueous solution

A series of poly(sodium styrene sulfonate)-b-poly(methyl methacrylate), PSSNa-b-PMMA, amphiphilic diblock copolymers have been synthesized through atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in N,N-dimethylformamide/water mixtures, starting from a PSSNa macroinitiator. The kinetics of the polymerization was followed by ¹H NMR, while the chemical composition of the copolymers was verified by a variety of techniques, such as ¹H NMR, FTIR and TGA. The MMA content of the copolymers ranges from 0 up to 60 mol%, while the number–average molecular weight of the PSSNa macroinitiator was 9000 g/mol. The self-association of the diblock copolymers in aqueous solution was compared to the respective behavior of similar random P(SSNa-co-MMA) copolymers through optical density measurements, pyrene fluorescence probing, dynamic light scattering and surface tension measurements. It is shown that the diblock copolymers form micellar structures in water, characterized by an increasing hydrophobic character and a decreasing size as the length of the PMMA block increases. These micelle-like structures turn from surface inactive to surface active as the length of the PMMA block increases. Moreover, contrary to the MMA-rich random copolymers, the respective diblock copolymers form water insoluble polymer/surfactant complexes with cationic surfactants such as hexadecyltrimethyl ammonium bromide (HTAB), leading to materials with antimicrobial activity.     

基于HEA封端聚氨酯大孔树脂颗粒的合成、表征及水声声学性能

制备了丙烯酸-β-羟乙酯（HEA）封端的聚氨酯（PUA）大分子单体,采用正庚烷作致孔剂,用悬浮聚合法合成了聚氨酯-苯乙烯（PUA-St）及聚氨酯-苯乙烯-甲基丙烯酸乙酯-二乙烯基苯（PUA-St-EMA-DVB）AB-交联共聚物大孔树脂颗粒。SEM表明：合成的PUA-St-EMA-DVB颗粒含有规整的、孔径较大的孔洞,...     

苯乙烯阴离子高温本体聚合引发机理的新发现(二)

采用创建的一种研究方法,以正丁基锂(n-BuLi)为引发剂,研究了苯乙烯(St)在60℃至140℃下的阴离子本体聚合.结果表明,低温下(＜20℃)以六元缔合结构形式存在的非活性正丁基锂在高温下(≥60℃)会转化为活性种.随机分布在该六元结构上的平均1.3个离子对可以引发St的阴离子聚合.然而从六元缔合结构上增长出的超分...     

Metal-free and base-free decarboxylation of substituted cinnamic acids in a deep eutectic solvent

Abstract

A metal-free and base-free strategy was developed in DES to synthesize styrenes for the first time by decarboxylation of cinnamic acid derivatives, which provided a renewable and cost efficiently protocol to access various styrenes including those with functional groups such as 4-vinylphenol and 1-chloro-4-vinylbenzene.     

Hydroarylation of arenes with styrenes using Montmorillonite K-10 as an efficient,selective, and recyclable catalyst

Abstract

Hydroarylation of styrene and its derivatives with arenes and heteroarenes was studied using Montmorillonite K-10 as an efficient, environmentally benign, economical, greener, and recyclable catalyst. The reaction gives 1,1-diarylalkanes with a very high selectivity and excellent yields in short time with greater substrate compatibility.     

P-Al/NaX结构和酸碱性位调控对甲苯甲醇侧链烷基化性能影响

采用水热法原位合成了P-Al/NaX催化剂,然后通过浸渍NaOH对其进行酸碱性调控,并探究了它在甲苯甲醇侧链烷基化反应中的催化性能。结合X射线衍射（XRD）、X射线光电子能谱（XPS）、N₂吸附-脱附等表征及催化活性数据发现,原位负载P、Al后,合成的磷铝硅酸盐（Na₁₃Al₂₄Si₁₃P₁₁O₉₆·H₂O）结构展现出较好的甲苯甲醇侧链烷基催化活性;随着NaOH负载量的增加,乙苯和苯乙烯的选择性呈先上升后下降的趋势,当负载质量分数为9%的NaOH时,苯乙烯选择性为45.84%,乙苯和苯乙烯的收率之和达到63.08%。这可能是由于NaOH的负载有利于催化剂表面碱性的提高和酸性的降低,而高的强碱性位和弱酸性位数量有利于甲苯甲醇侧链烷基化反应的进行。     

One-pot synthesis of stilbenes by dehydrohalogenation-Heck olefination and multicomponent Wittig-Heck reaction

A variant of olefination reaction involving in situ generation of styrene by either one-pot dehydrohalogenation-Heck or one-pot multicomponent Wittig-Heck reaction is developed.     

Evaluation of the interaction parameter for poly(ε‐caprolactone)/poly(styrene‐co‐acrylonitrile) blends

In this article, the miscibility of poly(ε‐caprolactone) (PCL) with poly(styrene‐co‐acrylonitrile) (SAN) containing 25 wt % of acrylonitrile is studied from both a qualitative and a quantitative point of view. The evidences coming from thermal analysis (differential scanning calorimetry) demonstrate that PCL and SAN are miscible in the whole range of composition. The Flory interaction parameter χ_1,2 was calculated by the Patterson approximation and the melting point depression of the crystalline phase in the blends; in both cases, negative values of χ_1,2 were found, confirming that the system is miscible. The interaction parameter evaluated within the framework of the mean field theory demonstrates that the miscibility of PCL/SAN blends is due to the repulsive interaction between the styrene and acrylonitrile segments in SAN. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Stereospecific styrene polymerization and ethylene–styrene copolymerization with titanocenes containing a pendant amine donor

A series of monocyclopentadienyl titanium complexes containing a pendant amine donor on a Cp group ( A = CpTiCl₃, B = Cp^NTiCl₃, C = Cp^NTiCl₂TEMPO, for Cp = C₅H₅, Cp^N = C₅H₄CH₂CH₂N(CH₃)₂, and TEMPO = 2,2,6,6‐tetramethylpiperidine‐N‐oxyl) are investigated for styrene homopolymerization and ethylene–styrene (ES) copolymerization. When activated by methylaluminoxane at 70 °C, complexes with the amine group ( B and C ) are active for styrene homopolymerization and afford syndiotactic polystyrene (sPS). The copolymerizations of ethylene and styrene with B and C yield high‐molecular weight ES copolymer, whereas complex A yields mixtures of sPS and polyethylene, revealing the critical role that the pendant amine has on the polymerization behavior of the complexes. Fractionation, NMR, and DSC analyses of the ES copolymers generated from B and C suggest that they contain sPS. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1579–1585, 2010