Anionic polymerization of styrenic macromonomers of polyisoprene,polybutadiene, and polystyrene

Anionic polymerization and high‐vacuum techniques were used to prepare a series of well‐defined polyisoprene, polybutadiene, and polystyrene polymacromonomers. The procedure involved (1) the synthesis of styrenic macromonomers in benzene by the selective reaction of the corresponding macroanion with the chlorine of 4‐(chlorodimethylsilyl)styrene (CDMSS) and (2) the in situ anionic polymerization of the macromonomer without previous isolation. The synthesis of the macromonomers [polyisoprene macromonomer: 11 samples, weight‐average molecular weight (M_w) = 1000–18,000; polybutadiene macromonomer: 5 samples, M_w = 2000–4000; and polystyrene macromonomer: 2 samples, M_w = 1300 and 3600] was monitored by size exclusion chromatography with refractive index/ultraviolet detectors. Selectivity studies with CDMSS indicated that polybutadienyllithum had the highest selectivity, and polystryryllithium the lowest. From kinetic studies it was concluded that the polymerization half‐life times were longer but comparable to those of styrene, and they appeared to only slightly depend on the molecular weight of the macromonomer chain (at least for low degrees of polymerization of the polymacromonomer and for M_w < 7000 for the macromonomer side chain). Dependence on the polymerization degree of the polymacromonomer product was also observed. All the prepared polymacromonomers were characterized by size exclusion chromatography with refractive index, ultraviolet and two‐angle laser light scattering detectors, and NMR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1038–1048, 2005     

Electrosteric stability of styrene/acrylic acid copolymer latices under emulsion polymerization reaction conditions

Acrylic acid (AA) is used in many emulsion polymerization formulations to improve the colloidal stability during and after the production of latex products. Theoretically, the improved stability originates from electrostatic repulsion complemented with steric repulsion. The objective of this work was to study the contribution of AA to the colloidal stability of polystyrene and styrene/AA copolymer latices under simulated reaction conditions. The strength of electrostatic and steric repulsion forces as a function of the electrolyte concentration, pH, and temperature was investigated via coagulation experiments with monomer‐swollen latices in stirred tank reactors. Transmission electron microscopy pictures and dynamic light scattering measurements provided an understanding of the conditions and mechanisms leading to coagulation. The experiments demonstrated that the presence of surface‐bound carboxylic groups only improved the colloidal stability if the carboxylic groups were charged, that is, at a high pH. At a low pH, the copolymer latices were even less stable than the homopolymer latex, and this indicated that the addition of AA did not improve the colloidal stability of a growing polystyrene latex. With respect to emulsion polymerization process operations, insufficient mixing and a highly concentrated electrolyte feed were found to be sources of fouling and enhanced macroscopic coagulation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 726–732, 2005     

Reversible addition–fragmentation chain transfer polymerization of styrene under microwave irradiation

Reversible addition–fragmentation chain transfer (RAFT) polymerizations of styrene under microwave irradiation (MI), with or without azobisisobutyronitrile, were successfully carried out in bulk at 72 and 98 °C, respectively. The results showed that the polymerizations had living/controlled features, and there was a significant enhancement of the polymerization rates under MI in comparison with conventional heating (CH) under the same conditions. The polymer structures were characterized with ¹H and ¹³C NMR. The results showed the same structure for both polymers obtained by MI and CH. Successful chain‐extension experimentation further demonstrated the livingness of the RAFT polymerization carried out under MI. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6810‐6816, 2006     

Comparison of fuel cell performance of selected fluoropolymer and hydrocarbon based grafted copolymers incorporating acrylic acid and styrene sulfonic acid

Fuel cell tests have been carried out on ion exchange membranes produced by the radiation grafting of either acrylic acid or styrene monomers (followed by a sulphonation reaction) onto selected hydrocarbon and fluoropolymer films. Relationships between the membranes' intrinsic properties, composition, ion exchange capacity and equilibrium water content and their respective fuel cell performance have been established. Copyright © 2002 John Wiley & Sons, Ltd.     

Deformation of styrene—divinylbenzene copolymers and hypercrosslinked polystyrenes during solvent adsorption and desorption

An automated procedure was developed for monitoring fast changes in the size of spherical samples of polymers during their contact with a solvent or drying. The kinetics of bulk deformation in these processes was studied for a series of cross-linked polymers, viz., gel-type and porous styrene—divinylbenzene copolymers and poly(divinylbenzenes), and hypercrosslinked polystyrenes. Gel, macroporous, and hypercrosslinked polystyrenes are substantially different in the rate, mechanism, and degree of swelling, which is associated with the principal differences in their physical structures. An unusual effect of a sharp decrease followed by a temporary increase in the volume of porous polystyrene and poly(divinylbenzene) materials were observed during desorption (evaporation) of organic solvents. Water desorption is accompanied by an excessive bulk compression of porous granules giving rise to negative deformations, which gradually relax to the state equilibrium for the dry polymer. The results of dynamic desorption porometry (for water desorption) are indicative of a bimodal size distribution of micropores in hypercrosslinked polystyrene. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 467–476, March, 2007.     

甲基丙烯酸缩水甘油酯/苯乙烯固相接枝聚丙烯

以苯乙烯(St)为共单体，过氧化苯甲酰(BPO)为引发剂，采用固相接枝反应将甲基丙烯酸缩水甘油酯(GMA)接枝到聚丙烯(PP)大分子链上。研究了反应时间、单体用量、引发剂用量等因素对接枝率的影响。采用凝胶渗透色谱(GPE)测定了PP和接枝物PP-g-(GMA-St)的分子量和分子量分布。结果 表明固相接枝PP反应条件为[GMA／[St]=2，反应3．5h，加入GMA 10份，BPO 5份。St的加入有助于GMA与PP的接枝，同时在一定程度上抑制了PP的降解。     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

VINYL MONOMERS BEARING CHROMOPHORE MOIETIES AND THEIR POLYMERS——Ⅹ.INITIATION AND PHOTOCHEMICAL PROPERTIES OF p-(N,N-DIMETHYLAMINO)STYRENE AND ITS POLYMERS*

A vinyl monomer having an electron-donating moiety, p-(N,N-dimethylamino)styrenc (DMAS),was synthesized. It was combined with benzoyl peroxide (BPO) to form a redox initiation system to initiatethe polymerization of methyl methacrylate (MMA). UV spectra measurements show that DMAS enters thePMMA chain as well. Both DMAS and its polymer P(DMAS) display strong fluorescence, and thefluorescence can be quenched by electron-deficient compounds such as methacrylonitrile, fumaronitrile andmethyl methacrylate etc. Moreover, DMAS can also form charge transfer complex (CTC) with strongelectron acceptors such as tetracyanoethylene (TCNE). The difference between the photochemical propertiesof DMAS and P(DMAS) were explained in terms of molecular structure change and polymer conformationeffect in solution. In addition, the CTC and exciplex formation of DMAS or P(DMAS) with C_(60) were alsostudied.