Microporous Hypercross-linked Conjugated Quinonoid Chromophores of Anthracene: Novel Polymers for CO2 Adsorption

Microporous hypercross-linked conjugated quinonoid chromophores represent a novel class of amorphous polymers, synthesized by the reaction of anthracene with dimethoxy methane in the presence of FeCl3 catalyst. Their N2 adsorption isotherms confirm their microporous nature. Diffuse reflectance UV-Visible(DRS UV-Vis) spectroscopy confirms their matrix built with the conjugated quinonoids by their broad light absorption characteristics extending from 1000 nm to 200 nm with the absorbance maximum close to 400 nm. The catalyst cross-linked anthracene with ―CH2― bridges and subsequently dehydrogenating them to form quinonoids. Their Fourier transform infrared(FTIR) spectra showed their characteristic quinonoid vibrations between 1600 and 1700 cm-1. The synthesis of polymers was carried out at 30, 40, 50, 60, 70 and 80 ℃, but the quinonoid content of the polymer obtained at 80 ℃ was higher than that of the others. Their scanning electron microscopy(SEM) images showed microspheres of 1 to 5 μm size built with tiny particles. Their surfaces were not smooth. The polymer synthesized at 80 ℃ showed 5.1 wt% CO2 sorption at 25 ℃ and 0.1 MPa, but when it was recross-linked, the CO2 sorption increased to 8 wt%. Hence, hypercross-linked conjugated quinonoid chromophores of anthracene are good for sorption of CO2.     

Low band‐gap diketopyrrolopyrrole‐containing polymers for near infrared electrochromic and photovoltaic applications

Donor–acceptor type polymers bearing diketopyrrolopyrrole and 3,4‐ethylenedioxythiophene units are reported. The polymers are green and exhibit very low band‐gaps (1.19 eV) with strong and broad absorption (maxima of about 830 nm) in the near infrared (NIR) region in their neutral film states. The polymers display color changes between dark green and light blue with exceptional optical contrasts in the NIR regions of up to 78 and 63% as thin films and single‐layer electrochromic devices, respectively. Fast switching, good stabilities as well as high coloration efficiencies (743–901 cm² C^?1) were also observed. The polymers could also be potentially used as photovoltaic material, with a power conversion efficiency of up to 1.68%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1287–1295     

Facile synthesis of thermosensitive functional polyaspartamide derivatives by click chemistry

Biodegradable and thermosensitive polyaspartamide derivatives containing pendant azide groups P(Asp‐Az)_X‐HPAs were synthesized from poly(l ‐succinimide) via the ring‐opening reaction with 2‐azidoethylamine (Az) and 5‐hydroxypentylamine (HPA). Then hydrophobic phenethyl (PEA) and imidazole (IMZ) moieties were introduced successfully with very high reaction efficiency above 90% to the side chains of P(Asp‐Az)_X‐HPA by click reaction to obtain thermoresponsive polyaspartamide derivatives containing pendant aromatic rings P(Asp‐Az)_X‐HPA‐PEAs and the thermo/pH‐responsive polyaspartamide derivatives containing pendant imidazole rings P(Asp‐Az)_X‐HPA‐IMZs, respectively. The thermoresponsive behaviors of P(Asp‐Az)_X‐HPA‐PEAs and P(Asp‐Az)_X‐HPA‐IMZs were confirmed by dynamic light scattering (DLS) and transmittance measurements, and the cloud point can be tuned by designed amounts of azide groups and can be further adjusted by the grafting molar percentage of hydrophobic phenethyl or imidazole moieties to the side chains of P(Asp‐Az)_X‐HPA via click chemistry. The pH‐responsive behavior of P(Asp‐Az)_X‐HPA‐IMZs can also be tuned. These results indicate that the obtained polyaspartamide‐based functional polymers can be further functionalized with hydrophilic long PEG chain and/or targeted moieties via click chemistry for drug delivery. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1296–1303     

Synthesis and characterization of double hydrophilic block copolymers containing semi-rigid and flexible segments

3-Methyl-(E)-stilbene (3MSti) and 4-(diethylamino)-(E)-stilbene (DEASti) monomers are synthesized and polymerized separately with maleic anhydride (MAn) in a strictly alternating fashion using reversible addition-fragmentation chain transfer (RAFT) polymerization techniques. The optimal RAFT chain transfer agents (CTAs) for each copolymerization affect the reaction kinetics and CTA compatibilities. Psuedo-first order polymerization kinetics are demonstrated for the synthesis of poly((3-methyl-(E)-stilbene)-alt-maleic anhydride) (3MSti-alt-MAn) with a thiocarbonylthio CTA (methyl 2-(dodecylthiocarbonothioylthio)−2-methylpropionate, TTCMe). In contrast, a dithioester CTA (cumyl dithiobenzoate, CDB) controls the synthesis of poly((4-(diethylamino)-(E)-stilbene)-alt-maleic anhydride) (DEASti-alt-MAn) with pseudo-first order polymerization kinetics. DEASti-alt-MAn is chain extended with 4-acryloylmorpholine (ACMO) to synthesize diblock copolymers and subsequently converted to a double hydrophilic polyampholyte block copolymers (poly((4-(diethylamino)-(E)-stilbene)-alt-maleic acid))-b-acryloylmorpholine) (DEASti-alt-MA)-b-ACMO) via acid hydrolysis. The isoelectric point and dissociation behavior of these maleic acid-containing copolymers are determined using ζ-potential and acid–base titrations, respectively. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 219–227     

Renewability is not Enough: Recent Advances in the Sustainable Synthesis of Biomass‐Derived Monomers and Polymers

Taking advantage of the structural diversity of different biomass resources, recent efforts were directed towards the synthesis of renewable monomers and polymers, either for the substitution of petroleum‐based resources or for the design of novel polymers. Not only the use of biomass, but also the development of sustainable chemical approaches is a crucial aspect for the production of sustainable materials. This review discusses the recent examples of chemical modifications and polymerizations of abundant biomass resources with a clear focus on the sustainability of the described processes. Topics such as synthetic methodology, catalysis, and development of new solvent systems or greener alternative reagents are addressed. The chemistry of vegetable oil derivatives, terpenes, lignin, carbohydrates, and sugar‐based platform chemicals was selected to highlight the trends in the active field of a sustainable use of renewable resources.     

Fabrication and microstructural characterization of functionally graded porous acrylonitrile butadiene styrene and the effect of cellular morphology on creep behavior

The ability to control material properties in space and time for functionally graded viscoelastic materials makes them an asset where they can be adapted to different design requirements. The continuous microstructure makes them advantageous over conventional composite materials. Functionally graded porous structures have the added advantage over conventional functionally graded materials of offering a significant weight reduction compared to a minor drop in strength. Functionally graded porous structures of acrylonitrile butadiene styrene (ABS) had been fabricated with a solid‐state constrained foaming process. Correlating the microstructure to material properties requires a deterministic analysis of the cellular structure. This is accomplished by analyzing the scanning electron microscopy images with a locally adaptive image threshold technique based on variational energy minimization. This characterization technique of the cellular morphology is analyst independent and works very well for porous structures. Inferences are drawn from the effect of processing on microstructure and then correlated to creep strain and creep compliance. Creep is strongly correlated to porosity and pore sizes but more associated to the size than to porosity. The results show the potential of controlling the cellular morphology and hence tailoring creep strain/compliance of ABS to some desired values. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 795–803     

Poly(trimethylene carbonate)/Poly(malic acid) Amphiphilic Diblock Copolymers as Biocompatible Nanoparticles

Amphiphilic polycarbonate–poly(hydroxyalkanoate) diblock copolymers, namely, poly(trimethylene carbonate) (PTMC)‐b‐poly(β‐malic acid) (PMLA), are reported for the first time. The synthetic strategy relies on commercially available catalysts and initiator. The controlled ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) catalyzed by the organic guanidine base 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD), associated with iPrOH as an initiator, provided iPrO?PTMC?OH, which served as a macroinitiator in the controlled ROP of benzyl β‐malolactonate (MLABe) catalyzed by the neodymium triflate salt (Nd(OTf)₃). The resulting hydrophobic iPrO?PTMC‐b‐PMLABe?OH copolymers were then hydrogenolyzed into the parent iPrO?PTMC‐b‐PMLA?OH copolymers. A range of well‐defined copolymers, featuring different sizes of segments (M_n,NMR up to 9300 g mol^?1; Ð_M=1.28–1.40), were thus isolated in gram quantities, as evidenced by NMR spectroscopy, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, and contact angle analyses. Subsequently, PTMC‐b‐PMLA copolymers with different hydrophilic weight fractions (11–75 %) self‐assembled in phosphate‐buffered saline upon nanoprecipitation into well‐defined nano‐objects with D_h=61–176 nm, a polydispersity index <0.25, and a negative surface charge, as characterized by dynamic light scattering and zeta‐potential analyses. In addition, these nanoparticles demonstrated no significant effect on cell viability at low concentrations, and a very low cytotoxicity at high concentrations only for PTMC‐b‐PMLA copolymers exhibiting hydrophilic fractions over 47 %, thus illustrating the potential of these copolymers as promising nanoparticles.     

N‐bromo‐hydantoin grafted polystyrene beads: Synthesis and nano‐micro beads characteristics for achieving controlled release of active oxidative bromine and extended microbial inactivation efficiency

N‐bromo‐hydantoin and N‐bromo‐5,5′‐dimethylhydantoin conjugated polystyrene beads were synthesized from chloromethyl polystyrene beads which differ in their particles size, crosslinking, nano‐micro porosity, and tunnels size on the surface, in order to study the effect of these parameters on oxidative halogen release and resultant activity, for water purification applications. The synthesized beads were characterized using elemental analysis, FT‐IR, solid state ¹³C‐NMR, and scanning electron microscope (SEM). The conjugation yield and kinetics in different solvents and bromine loading capacity were studied. The N‐bromoamine polystyrene beads were tested for water decontamination according to NSF 231 protocol. The release of active bromine was analyzed by spectrophotometer using a DPD‐1 kit and also studied the antimicrobial activity against Escherichia coli and MS2 phages. Bead's nano‐micro characteristics were found critical for oxidative halogen release control: rate stabilization and modulation, extension and also influences antimicrobial activity. The synthesized beads exhibited extended and stable release of bromine, 6 and 4 log reduction for E. coli and MS2, respectively for 250 L of passing contaminated water. Thus, N‐halamine hydantoins conjugated polystyrenes, chemically or kinetically release modified should have applications as disinfectants in water purification systems as well as medical field. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 596–610