新型三噻吩衍生物的合成及其液晶性能

近晶A相;新型三噻吩衍生物的合成及其液晶性能     

环肽合成方法的研究进展

介绍了纯环肽与杂环肽合成的方法、策略及其优缺点,列举了一些常用缩合试剂,探讨了反应溶液浓度、线型肽前体化合物的结构及构象等因素对环化反应的影响.     

飞秒激光脉冲整形技术及其应用

通过频域上控制飞秒激光脉冲幅度、相位和偏振在时域上可以获得几乎任意形状的飞秒激光脉冲,这种飞秒激光脉冲整形技术可为研究光与原子分子非线性相互作用提供一种全新实验技术手段.本文介绍飞秒激光脉冲整形发展历史、技术方法、控制方式及其相关应用,并展望飞秒激光脉冲整形技术未来的发展方向.     

氧化镁两步法制备阻燃型氢氧化镁

以氯化镁焙烧生成的氧化镁为原料,采用两步法即先水化后水热的方法制备出六方片状氢氧化镁。考察了水化时间、水热时间和温度及水热添加剂氢氧化钠浓度对氢氧化镁材料形貌的影响。研究表明,水化时间超过3 h,氧化镁水化率基本不变,水热温度越高对晶体形貌改善越大,水热时间的延长可促进晶体粒径及厚度的增加,但是对晶体的宽厚比改变不大。水热添加剂氢氧化钠浓度的增加可明显地提高晶体结晶度,减小晶体微观内应变,提高粉体分散性。     

Adsorption behavior of mercury and precious metals on cross-linked chitosan and the removal of ultratrace amounts of mercury in concentrated hydrochloric acid by a column treatment with cross-linked chitosan.

Cross-linked chitosan was synthesized with chitosan and ethylene glycol diglycidyl ether. The adsorption behavior of trace amounts of metal ions on the cross-linked chitosan was systematically examined by packing it in a mini-column, passing a metal solution through it and measuring metal ions in the effluent by ICP-MS. The cross-linked chitosan adsorbed mercury and precious metals (Pd, Pt, and Au) at pH values from acidic to neutral. Especially, mercury in concentrated hydrochloric acids could be adsorbed on cross-linked chitosan quantitatively by an anion-exchange mechanism in the form of a stable chloride complex. This method was applied to the removal of mercury from commercially available hydrochloric acid; more than 97% of mercury was removed, and the residual mercury in the hydrochloric acid (Grade: for trace analysis) was found to be 0.15 ppb. Mercury adsorbed on the cross-linked chitosan could be easily desorbed with an eluent containing I M hydrochloric acid and 0.05 M thiourea. The thus-refreshed cross-linked chitosan could be repeatedly used for the removal of mercury in hydrochloric acid.     

大长径比ZnS纳米线的制备、结构和生长机理

通过碳热辅助化学气相沉积法, 以Au作为催化剂, 在较低温度(800 益)制备了ZnS纳米线, 其尺寸均匀, 表面光滑, 直径约为40 nm, 具有很大的长径比, 是典型的单晶纤锌矿六方结构. 高分辨透射电镜和选区电子衍射分析表明, 纳米线的生长方向为[1100], 与已报道的生长方向不同. 纳米线的生长是由气-液-固(vapor-liquid-solid)机理控制的.     

Use of the beta-phase of poly(9,9-dioctylfluorene) as a probe into the interfacial interplay for the mixed bilayer films formed by sequential spin-coating

Spin-coating one polymer solution on another spin-cast polymer film is believed to result in unfavorable interfacial mixing. Here, we show some results to demonstrate that some interesting properties will be obtained in such mixed bilayer films formed by sequential spin-coating. Poly(9-vinylcarbazole) and poly(9,9-dioctylfluorene-2,7-diyl) were chosen as the first and second polymer layers, respectively. By varying the initial thickness of the first layer, some interesting variations were observed. The spectroscopic features of beta-phase polyfluorene were utilized to reflect the variations at the complicated interface. Morphologies were also presented to illustrate that the variations of spectroscopic features were accompanied with some interesting morphological changes. On the basis of these results, a schematic model was proposed to gain insight into the mixed interface formed by sequential spin-coating. Polymer light-emitting devices based on such films were also investigated.     

几种吸附材料去除主流烟气中的挥发性醛酮类化合物

研究了分别添加活性炭、竹炭、海泡石、壳聚糖的卷烟复合滤咀对主流烟气中挥发性醛酮类化合物和其他有害物质(如焦油、一氧化碳等)的吸附效果.研究结果表明:壳聚糖滤嘴的吸附性能大干活性炭,竹炭和海泡石;活性炭的吸附性能优于竹炭和海泡石.对于焦油,海泡石的吸附作用最大,竹炭、活性炭有一定的吸附,壳聚糖则无明显影响.壳聚糖对于烟气...     

SrAl2O4∶Eu2+，Dy3+长余辉材料发光性能与温度依赖研究

对SrAl₂O₄∶Eu²⁺,Dy³⁺长余辉材料在100~500 K温度之间的发光性能进行研究。实验结果表明,材料的荧光及余辉强度在特定温度区间内呈线性变化,在热释峰所在温度范围具有较好的发光性能。其变化规律表明SrAl₂O₄∶Eu²⁺,Dy³⁺长余辉材料内部陷阱中电子的释放包括瞬时释放和延时释放两种类型,其中电子瞬时释放进而跃迁发光是荧光的组成部分,延时释放产生的跃迁则导致余辉发光。陷阱和电子的复合与陷阱中电子释放过程均随温度升高而增强,但温度过高时会发生热猝灭。材料荧光强度与余辉强度在特定温度区间内随温度呈线性变化关系表明其可以作为一种光纤温度传感材料。     

磁敏传感器竞争免疫法检测牛奶中的氯霉素残留量

利用直接竞争免疫原理和巨磁致电阻效应,建立了磁敏生物传感器检测氯霉素的方法。制备氯霉素半抗原芯片,依次加入待测样品、生物素化抗体、链霉亲和素磁颗粒偶联物,使之发生竞争免疫反应,再利用传感器检测芯片上结合的磁颗粒数目。通过对检测条件的优化,建立了氯霉素浓度与磁颗粒数目的标准工作曲线。本方法的检测范围为0.05～100.0μg/L;检出限为50 ng/L;用于牛奶检测,回收率为95.97%～99.36%;批内相对标准偏差为0.8%～3.9%,批间相对标准偏差为1.1%～1.7%;与ELISA方法的一致相关系数达到0.98。本方法可在30 min内快速完成定量检测,为快速多靶标磁敏竞争免疫检测体系的建立提供了可行性。