Recent progress in bipolar electropolymerization methods toward one-dimensional conducting polymer structures

Recent studies on electropolymerization methods toward one-dimensional conducting polymer structures are summarized in this review. In particular, advanced techniques for templated electropolymerization of aromatic monomers, in which migration of monomers into nanopores of the template is highly enhanced by using electrophoretic effect, are described. For templateless approach, electric field–driven bipolar electropolymerization of 3,4-ethylenedioxythiophene monomer is introduced as a strong tool to fabricate the corresponding conducting polymer fibers and films grown in the direction of an applied electric field.     

Coronenetetraimide‐Centered Cruciform Pentamers Containing Multiporphyrin Units: Synthesis and Sequential Photoinduced Energy‐ and Electron‐Transfer Dynamics

A series of coronenetetraimide (CorTIm)‐centered cruciform pentamers containing multiporphyrin units, in which four porphyrin units are covalently linked to a CorTIm core through benzyl linkages, were designed and synthesized to investigate their structural, spectroscopic, and electrochemical properties as well as photoinduced electron‐ and energy‐transfer dynamics. These systems afforded the first synthetic case of coroneneimide derivatives covalently linked with dye molecules. The steady‐state absorption and electrochemical results indicate that a CorTIm and four porphyrin units were successfully characterized by the corresponding reference monomers. In contrast, the steady‐state fluorescence measurements demonstrated that strong fluorescence quenching relative to the corresponding monomer units was observed in these pentamers. Nanosecond laser flash photolysis measurements revealed the occurrence of intermolecular electron transfer from triplet excited state of zinc porphyrins to CorTIm. Femtosecond laser‐induced transient absorption measurements for excitation of the CorTIm unit clearly demonstrate the sequential photoinduced energy and electron transfer between CorTIm and porphyrins, that is, occurrence of the initial energy transfer from CorTIm (energy donor) to porphyrins (energy acceptor) and subsequent electron transfer from porphyrins (electron donor) to CorTIm (electron acceptor) in these pentamers, whereas only the electron‐transfer process from porphyrins to CorTIm was observed when we mainly excite porphyrin units. Finally, construction of high‐order supramolecular patterning of these pentamers was performed by utilizing self‐assembly and physical dewetting during the evaporation of solvent.     

Asymmetric Total Synthesis of ent‐Pyripyropene A

An asymmetric total synthesis of ent‐pyripyropene A was achieved by a convergent synthetic route. We used our originally developed Ti^III‐catalyzed radical cyclization to construct an AB‐ring portion that consisted of a trans‐decalin skeleton with five contiguous stereogenic centers. The coupling between the AB‐ring and the DE‐ring portions, and a subsequent C‐ring cyclization, led to the total synthesis of ent‐pyripyropene A. An evaluation of the insecticidal activity of ent‐pyripyropene A against two aphid species revealed that ent‐pyripyropene A was 35–175 times less active than naturally occurring pyripyropene A. This result indicated that the biological target of pyripyropene A recognizes the absolute configuration of pyripyropene A.     

Olefin Polymerization Catalyzed by Double‐Decker Dipalladium Complexes: Low Branched Poly(α‐Olefin)s by Selective Insertion of the Monomer Molecule

Dipalladium complexes of a cyclic bis(diimine) ligand with a double‐decker structure catalyze polymerization of ethylene and α‐olefins and copolymerization of ethylene with 1‐hexene. The polymerization of 1‐hexene yields a polymer that is mainly composed of the hexamethylene unit formed by 2,1‐insertion of the monomer into the palladium–carbon bond, followed by chain‐walking (6,1‐insertion). The polymerization of 4‐methyl‐1‐pentene proceeds by 2,1‐insertion with a selectivity of 92–97 %, and affords the polymer with methyl and 2‐methylhexyl branches. 2,1‐Insertion occurs selectively in all of the polymerization reactions of α‐olefins catalyzed by the dipalladium complexes. Ethylene polymerization with the catalyst at 100 °C lasts over 24 h, whereas the monopalladium–diimine catalyst loses its activity within 8 h at 60 °C. Polyethylene obtained by the dipalladium catalyst is less‐branched and has a higher molecular weight compared to that of the monopalladium catalyst under the same conditions. Copolymerization of ethylene with 1‐hexene affords solid products with melting points and molecular weights that vary depending on the polymerization time, suggesting formation of a block and/or gradient copolymer.     

Directing/Protecting‐Group‐Free Synthesis of Tetraaryl‐Substituted Pyrazoles through Four Direct Arylations on an Unsubstituted Pyrazole Scaffold

A directing/protecting‐group‐free synthesis of 1,3,4,5‐tetraaryl‐substituted pyrazoles was achieved through four transition metal‐catalyzed direct arylations. Various pyrazoles with four different aryl rings were obtained using readily available reagents from an unsubstituted pyrazole. Two aryl‐substituted pyrazoles showed intense violet fluorescence, high quantum yields (Φ_f=0.68, 0.64), and large Stokes shifts (19000, 15200 cm^?1).     

Upper Limit of Nitrogen Content in Carbon Materials

Nitrogen‐doped carbon materials (NDCs) play an important role in various fields. A great deal of effort has been devoted to obtaining carbon materials with a high nitrogen content; however, much is still unknown about the structure of the nitrogen‐doped materials and the maximum nitrogen content possible for such compounds. Here, we demonstrate an interesting relationship between the N/C molar ratio and the N content of NDCs. The upper limit for the nitrogen content of NDCs that might be achieved was estimated and found to strongly depend on the carbonization temperature (14.32 wt % at 1000 °C and 21.66 wt % at 900 °C), irrespective of the precursor or preparation conditions. Simulations suggest that, especially in the carbon architectures obtained at high temperatures, nitrogen atoms are always located on separate hexagon moieties in a graphitic configuration, thereby yielding a critical N/C molar ratio very close to the value estimated from the experimental results.     

Carbazole Dendrimers as Solution‐Processable Thermally Activated Delayed‐Fluorescence Materials

Recently, thermally activated delayed fluorescence (TADF) materials have received increasing attention as effective emitters for organic light‐emitting diodes (OLEDs). However, most of them are usually employed as dopants in a host material. In this report, carbazole dendrimers with a triphenyl‐s‐triazine core are reported, which are the first solution‐processable, non‐doped, high‐molecular‐weight TADF materials. The dendrimers were obtained by a new and facile synthetic route using the tert‐butyldimethylsilyl moiety as a protecting group. All dendrimers showed TADF in toluene. Measurements of the temperature‐dependent luminescence lifetime revealed that spin‐coated neat films also showed TADF with moderate quantum yields. OLED devices incorporating these dendrimers as spin‐coated emitting layers gave external quantum efficiencies of up to a 3.4 %, which suggests that this device is harvesting triplet excitons. This result indicates that carbazole dendrimers with attached acceptors are potential TADF materials owing to their polarized electronic structure (with HOMO–LUMO separation).     

Superstructure in the Metastable Intermediate‐Phase Li2/3FePO4 Accelerating the Lithium Battery Cathode Reaction

LiFePO₄ is an important cathode material for lithium‐ion batteries. Regardless of the biphasic reaction between the insulating end members, Li_xFePO₄, x≈0 and x≈1, optimization of the nanostructured architecture has substantially improved the power density of positive LiFePO₄ electrode. The charge transport that occurs in the interphase region across the biphasic boundary is the primary stage of solid‐state electrochemical reactions in which the Li concentrations and the valence state of Fe deviate significantly from the equilibrium end members. Complex interactions among Li ions and charges at the Fe sites have made understanding stability and transport properties of the intermediate domains difficult. Long‐range ordering at metastable intermediate eutectic composition of Li_2/3FePO₄ has now been discovered and its superstructure determined, which reflected predominant polaron crystallization at the Fe sites followed by Li⁺ redistribution to optimize the Li? Fe interactions.     

Viscosity of particle filled polymer melts

Summary Viscosities of particle filled polymer melts were measured at fairly low shear rate. Particles were glass beads, glass balloons, and silas balloons. Polymers were polyethylene and polystyrene. Flow curves were superimposed with respect to concentration of filler. The relative viscosity defined as the ratio of viscosity of filled polymer to that of unfilled polymer at the same shear stress is obtained as an asymptotic value even for highly filled material. The relation between relative viscosity and volume fraction of filler was represented by the equations derived byMaron andPierce orMooney. Only the distribution of particle size had influence on relative viscosity at a defined filler concentration. Yield stresses were estimated, and found to increase exponentially in the range of volume fraction from 0.1 to 0.5.

---

Zusammenfassung Viskositäten von Polymerschmelzen, die mit Teilchen gefüllt worden waren, wurden bei mittleren Schergeschwindigkeiten bestimmt. Als Teilchen wurden Voll- und Hohlkugeln aus Glas, sowie sog. silas balloons, als Polymere Polyäthylen und Polystyrol verwendet. Die Fließkurven für verschiedene Füllstoffkonzentrationen wurden überlagert. Die relative Viskosität, definiert als das Verhältnis der Viskositäten von gefülltem und ungefülltem Polymer bei gleicher Schubspannung, besitzt einen asymptotischen Wert selbst für hoch gefülltes Material. Die Beziehung zwischen relativer Viskosität und Füllstoff-Volumenkonzentration läßt sich durch eine vonMaron undPierce oder eine vonMooney abgeleitete Gleichung beschreiben. Nur die Teilchengrößenverteilung hat bei einer definierten Füllstoffkonzentration einen Einfluß auf die relative Viskosität. Fließspannungen werden abgeschätzt und dafür in einem Konzentrationsbereich zwischen 0,1 und 0,5 ein exponentieller Anstieg gefunden.

---

---

With 13 figures and 2 tables