Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Phase behavior and preparation of mesoporous silica in aqueous mixtures of fluorinated surfactant and hydrophobic fluorinated polymer

The phase behavior and formation of self-assemblies in the ternary water/fluorinated surfactant (C(8)F(17)EO(10))/hydrophobic fluorinated polymer (C(3)F(6)O)(n)COOH system and the application of those assemblies in the preparation of mesostructured silica have been investigated by means of phase study, small angle X-ray scattering, and rheology. Hexagonal (H(1)), bicontinuous cubic (V(1)) with Ia3d symmetry, and polymer rich lamellar (L(alpha)(')) are observed in the ternary diagram. C(8)F(17)EO(10) molecules are dissolved in polymer rich aggregates, whereas (C(3)F(6)O)(n)COOH molecules are practically insoluble in the surfactant lamellar phase due to packing restrictions. Hence, two types of lamellar phases exist: one with surfactant rich (L(alpha)) and the other with polymer rich (L(alpha)(')) in the water/C(8)F(17)EO(10)/(C(3)F(6)O)(n)COOH system. As suggested by rheological measurements, worm-like micelles are present in C(8)F(17)EO(10) aqueous solutions but a rod-sphere transition takes place by solubilization of (C(3)F(6)O)(n)COOH. C(8)F(17)EO(10) acts as a structure directing agent for the preparation of hexagonal mesoporous silica by the precipitation method. The addition of (C(3)F(6)O)(n)COOH induces the formation of larger but disordered pores.     

Optical oxygen sensor based on fluorescence change of pyrene-1-butyric acid chemisorption film on an anodic oxidation aluminium plate

An optical oxygen-sensing material based on the fluorescence intensity changes of pyrene-1-butyric acid (PBA) chemisorption film has been developed and characterised. The fluorescence intensity of PBA film decreased with increase of oxygen concentration. The I₀/I₁₀₀ value of PBA film is estimated to be 6.14±0.15 and large Stern-Volmer constant (K_SV=0.028±0.13 Torr⁻¹) is obtained. After irradiation for 24 h with 150 W tungsten lamp, little changes of oxygen-sensing properties were observed. These results indicate that PBA film is highly oxygen-sensitive and photostability device. The response times of the PBA chemisorption film were 10.0 s for switching from argon to oxygen, and 53.0 s for switching from oxygen to argon. Moreover, the optical sensor based on the PBA chemisorption film was applied to the measurement of oxygen concentration in aqueous solution.     

Chemoenzymatic synthesis of [3,9-C]-labeled NeuAc and KDN

The chemoenzymatic synthesis of ¹³C-labeled sialic acid (NeuAc) and 3-deoxy-d-glycero-d-galacto-2-nonulosonic acid (KDN) as useful molecular probes for studying the conformation of sialyl or KDN oligosaccharides attached to proteins was performed by using [6-¹³C]-ManNAc, [6-¹³C]-Man and [3-¹³C]-pyruvic acid sodium salt. In the synthesis of the compounds, 5,6-anhydro intermediates were found to easily provide not only 6-¹³C-labeled but also 5-, and 6-modified NeuAc and KDN analogs. Furthermore, it was demonstrated that identical results are obtained by NMR for both [3,9-¹³C]-NeuAc and 1:1 mixtures of [3-¹³C]- and [9-¹³C]-NeuAc.     

Molecular mechanics (MM3) calculations on lithium amide compounds

The MM3 force field has been extended to deal with the lithium amide molecules that are widely used as efficient catalysts for stereoselective asymmetric synthesis. The MM3 force field parameters have been determined on the basis of the ab initio MP2/6-31G* and/or DFT (B3LYP/6-31G*, B3-PW91/6-31G*) geometry optimization calculations. To evaluate the electronic interactions specific to the lithium amides derived from the diamine molecules properly, the Lewis bonding potential term for the interaction between the lithium atom and the nonbonded adjacent electronegative atom such as nitrogen was introduced into the MM3 force field. The bond dipoles were evaluated correctly from the electronic charges on the atoms calculated by fitting to the electrostatic potential at points selected. The MM3 results on the molecular structures, conformational energies, and vibrational spectra show good agreement with those from the quantum mechanical calculations.     

Regular two-dimensional molecular array of photoluminescent Anderson-type polyoxometalate constructed by Langmuir-Blodgett technique

A regular two-dimensional photoluminescent array of Anderson-type polyoxometalates (POMs) was constructed as built-up Langmuir-Blodgett (LB) films. LB films of hexatungstoantimonate (SbW(6)) and -manganate (MnW(6)) were successfully fabricated by using dimethyldioctadecylammonium (DODA) as cationic partner, while hexamolybdochromate (CrMo(6)) was unsuccessful. Specular X-ray reflectivity (SXR) and grazing incidence X-ray diffraction (GIXD) measurements revealed that both SbW(6)/DODA and MnW(6)/DODA LB films exhibited well-ordered layers consisting of periodic arrangement of the planar-structured Anderson-type molecules. Surprising periodicity was observed in SbW(6)/DODA LB film, in which the distance between SbW(6) and DODA layers was 4.40 nm, and SbW(6) anions would form a two-dimensional square lattice with a length of 1.4 nm. SbW(6)/DODA LB films exhibited photoluminescence at 77 K, while emission spectra were observed at room temperature for SbW(6) solid.     

Selection of DNA aptamers recognizing small cell lung cancer using living cell-SELEX

We applied Systematic Evolution of Ligands by EXponential enrichment using Small Cell Lung Cancer (SCLC) cells. A DNA aptamer was identified and evaluated by fluorescent confocal microscopy and flow cytometry. Our results showed that the DNA aptamer binds to molecules that exist predominantly on target SCLC cell surfaces compared with other types of SCLC cells.     

High-performance fluorescent particles prepared via miniemulsion polymerization

Highly fluorescent polymer particles were prepared with Eu beta-diketonates complex as a fluorophore by miniemulsion polymerization technique. Eu beta-diketonates complex has a long decay time, a large Stokes shift, and very narrow emission bands in comparison with other organic fluorescent compounds. Aqueous miniemulsion was prepared by mixing monomer, crosslinker, hydrophobe, and Eu beta-diketonates complex and then putting the mixture into an aqueous solution of surfactant, followed by ultrasonication. An aqueous solution of initiator was added to the miniemulsion to obtain fluorescent polymer particles, which were monodispersed without aggregation. Particle size was decreased to deca-nano scale by increasing the amount of surfactant. Fluorescent intensity was increased by using Eu beta-complex coordinated with additional ligand. Further fluorescence quantum yields and fluorescent properties in the presence of DNA were investigated to the confirm superiority of Eu beta-diketonates complexes in polymer particles.     

Formation and recovery of a cell sheet by a particle monolayer with the surface roughness

We studied the topographical effect of roughness displayed by a closely packed particle monolayer on formation of a cell monolayer (cell sheet). Particle monolayers were prepared by Langmuir-Blodgett deposition using particles, which were 527nm (SA053) and 1270nm (SA127) in diameter. Human umbilical vein endothelial cells (HUVECs) were seeded at a high density (2.0 x10(5)cells/cm(2)) onto particle monolayers. It was found that cells gradually became into contact with adjacent cells on the SA053 monolayer and the formed cell sheet could be readily detached from the particle monolayer by gentle pipetting. On the other hand, cells adhering onto the tissue culture polystyrene (TCPS) and the SA127 particle monolayer were difficult to peel off. At a low cell seeding density (5.0x10(4)cells/cm(2)), pre-coating with bovine plasma fibronectin (FN) allowed cell growth on an SA053 particle monolayer, and a confluent monolayer was able to be peeled as a cell sheet from the particle monolayer just by pipetting. By immunostaining of human fibronectin, we found that fibronectin was secreted and concentrated onto the substrate side of a cell sheet. The obtained cell sheet adhered and grew on the TCPS again within 20min.     

Fabrication of mesoporous ZnO nanosheets from precursor templates grown in aqueous solutions

Mesoporous ZnO nanosheets were successfully prepared by pyrolytic transformation of zinc carbonate hydroxide hydrate, Zn₄CO₃(OH)₆·H₂O. The nanosheets were initially formed as assemblies on glass substrates during chemical bath deposition (CBD) in aqueous solutions of urea and zinc acetate dihydrate, zinc chloride, zinc nitrate hexahydrate, or zinc sulfate heptahydrate at 80°C. It was key to induce heterogeneous nucleation of Zn₄CO₃(OH)₆·H₂O by promoting a gradual hydrolysis reaction of urea and controlling the degree of supersaturation of zinc hydroxide species. Morphology of Zn₄CO₃(OH)₆·H₂O was largely influenced by the anions present in the CBD solutions. The Zn₄CO₃(OH)₆·H₂O nanosheets were transformed into wurtzite ZnO by heating at 300°C in air without losing the microstructural feature.