Use of experiment and an inverse method to study interface heat transfer during solidification in the investment casting process

A technique to determine the thermal boundary conditions existing during the solidification of metallic alloys in the investment casting process is presented. Quantitative information about these conditions is needed so that numerical models of heat transfer in this process produce accurate results. In particular, the variation of the boundary conditions both spatially and temporally must be known. The method used involves the application of a new inverse heat conduction method to thermal data recorded during laboratory experiments of aluminium alloy solidification in investment casting shell moulds. The resultant heat transfer coefficient for the alloy/mould interface is calculated. An experimental programme to determine requisite mould thermal properties was also undertaken. It was observed that there is significant variation of the alloy/mould heat transfer coefficient during solidification. It is found to be highly dependent on the alloy type and on the vertical position below the initial free surface of the liquid metal. The aluminium casting alloys used in this study were 413, A356, 319 (Aluminum Association designations), and commercially pure aluminium. These alloys have significantly different freezing ranges. In particular, it was found that alloys with a high freezing range solidify with rates of heat transfer to the mould which are very sensitive to metallostatic head.     

On the equivalence of quadratic optimization problems commonly used in portfolio theory

In the paper, we consider three quadratic optimization problems which are frequently applied in portfolio theory, i.e., the Markowitz mean–variance problem as well as the problems based on the mean–variance utility function and the quadratic utility. Conditions are derived under which the solutions of these three optimization procedures coincide and are lying on the efficient frontier, the set of mean–variance optimal portfolios. It is shown that the solutions of the Markowitz optimization problem and the quadratic utility problem are not always mean–variance efficient.     

Risk analysis with contractual default. Does covenant breach matter?

Mergers and acquisitions (M&A), private equity and leveraged buyouts, securitization and project finance are characterized by the presence of contractual clauses (covenants). These covenants trigger the technical default of the borrower even in the absence of insolvency. Therefore, borrowers may default on loans even when they have sufficient available cash to repay outstanding debt. This condition is not captured by the net present value (NPV) distribution obtained through a standard Monte Carlo simulation. In this paper, we present a methodology for including the consequences of covenant breach in a Monte Carlo simulation, extending traditional risk analysis in investment planning. We introduce a conceptual framework for modeling technical and material breaches from the standpoint of both lenders and shareholders. We apply this framework to a real case study concerning the project financing of a 64-million euro biomass power plant. The simulation is carried out on the actual model developed by the financial advisor of the project and made available to the authors. Results show that both technical and material breaches have a statistically significant impact on the net present value distribution, and this impact is more relevant when leverage and cost of debt increase.     

Simultaneous optimization of capacity and planned lead time in a two-stage production system with different customer due dates

We consider a two-stage make-to-order manufacturing system with random demands, processing times, and distributed customer due dates. The work to each stage is released based on a planned lead time. A general approach to minimize total inventory holding and customer order tardiness cost is presented to find the optimal manufacturing capacities and planned lead times for each manufacturing stage. Expressions are derived for work-in process inventories, finished-goods-inventory and expected backorders under the assumption of a series of M/M/1 queuing systems and exponentially distributed customer required lead times. We prove that the distribution of customer required lead time has no influence on the optimal planned lead times whenever capacity is predefined but it influences the optimal capacity to invest into. For the simultaneous optimization of capacity and planned lead times we present a numerical study that shows that only marginal cost decreases can be gained by setting a planned lead time for the upstream stage and that a considerable cost penalty is incurred if capacity and planned lead time optimization are performed sequentially.     

Robust portfolios that do not tilt factor exposure

Robust portfolios reduce the uncertainty in portfolio performance. In particular, the worst-case optimization approach is based on the Markowitz model and form portfolios that are more robust compared to mean–variance portfolios. However, since the robust formulation finds a different portfolio from the optimal mean–variance portfolio, the two portfolios may have dissimilar levels of factor exposure. In most cases, investors need a portfolio that is not only robust but also has a desired level of dependency on factor movement for managing the total portfolio risk. Therefore, we introduce new robust formulations that allow investors to control the factor exposure of portfolios. Empirical analysis shows that the robust portfolios from the proposed formulations are more robust than the classical mean–variance approach with comparable levels of exposure on fundamental factors.     

Investment strategies and compensation of a mean–variance optimizing fund manager

This paper introduces a general continuous-time mathematical framework for solution of dynamic mean–variance control problems. We obtain theoretical results for two classes of functionals: the first one depends on the whole trajectory of the controlled process and the second one is based on its terminal-time value. These results enable the development of numerical methods for mean–variance problems for a pre-determined risk-aversion coefficient. We apply them to study optimal trading strategies pursued by fund managers in response to various types of compensation schemes. In particular, we examine the effects of continuous monitoring and scheme’s symmetry on trading behavior and fund performance.     

Optimal investment–reinsurance with delay for mean–variance insurers: A maximum principle approach

This paper is concerned with an optimal investment and reinsurance problem with delay for an insurer under the mean–variance criterion. A three-stage procedure is employed to solve the insurer’s mean–variance problem. We first use the maximum principle approach to solve a benchmark problem. Then applying the Lagrangian duality method, we derive the optimal solutions for a variance-minimization problem. Based on these solutions, we finally obtain the efficient strategy and the efficient frontier of the insurer’s mean–variance problem. Some numerical examples are also provided to illustrate our results.     

指数保费准则下的最优投资和比例再保险

该文研究了保险公司的最优投资和比例再保险问题,其中假定保险公司的盈余过程为一个带扩散扰动的经典风险过程.假定再保险的保费按照指数保费原理来计算,这使得所研究的随机控制问题成为非线性的.该文同时考虑了最大化终端财富指数效用和最大化调节系数两类问题,并给出了最优值函数和相应的最优策略的解析表达.此外,该文还分析了再保险公司的风险厌恶和保险公司的不确定性参数对最优策略的影响.     

The mathematics of Ponzi schemes

A first order linear differential equation is used to describe the dynamics of an investment fund that promises more than it can deliver, also known as a Ponzi scheme. The model is based on a promised, unrealistic interest rate; on the actual, realized nominal interest rate; on the rate at which new deposits are accumulated and on the withdrawal rate. Conditions on these parameters are given for the fund to be solvent or to collapse. The model is fitted to data available on Charles Ponzi’s 1920 eponymous scheme and illustrated with a philanthropic version of the scheme.     

基于回收期的科技创新项目决策模型分析

回收期方法是一种常用的评价方法.本文通过实物期权思想,对在不确定性下的科技创新项目,论证了回收期方法是合理的,通过本文的计算分析可知,较短的回收期隐含着较少的等待价值,也隐含着较高的单位资本回报.因此,利用回收期方法评价科技创新项目,不仅能得出与NPV方法评价的同样结论,而且还给投资者更多的信息,如几年之内可望收回投资.这对于资本不太雄厚的投资者来说更具有实际的意义,而对于资本雄厚的投资者也提供了能获得更多回报的投资决策评价方法.