复合多层介质在可变温度和集中荷载作用下的位移和应力

研究了多层介质中的热弹性位移和应力.多层介质具有不同厚度,各层又具有不同的弹性性质,最上层表面上作用热荷载和集中荷载.假设各层分别是均匀、各向同性弹性材料,各层相关的位移分量是轴对称的,对称轴为各层表面的垂线.因此,各层应力函数满足无体力的单一方程.利用积分变换法求解了该方程,对由任意多个层数构造的多层介质,给出了其相应层数基础热弹性位移和应力的解析表达式.并对3层介质和4层介质时的数值结果进行了比较.     

15C的中子晕结构研究

实验测量了83A MeV ^14,15C的核反应总截面(σ_R)及¹⁵C产生^14,15C和¹⁴C产生¹³C的动量分布(P_//). 分析得到了¹⁵C产生¹⁴C和¹³C的动量分布半高宽(FWHM)分别为71±9MeV/c和223±28MeV/c, 而¹⁴C产生¹³C的FWHM为195±21MeV/c. 从¹⁵C和¹⁴C产生¹³C的FWHM与Goldhaber模型的预言基本一致. 而¹⁵C产生¹⁴C的FWHM却要比该模型计算小得多. 同时观测到¹⁵C的σ_R比相邻核有反常增加. 在Glauber模型框架中, 对实验测得的P_//和σ_R进行了探讨. P_//和σ_R的分析结果同时显示¹⁵C的最后一个中主要处于s_1/2态, 具有中子晕结构.     

25MeV/u6He+9Be反应的轻粒子发射

在25MeV/u ⁶He与⁹Be靶的反应中,107°和128°处明显地观察到了轻粒子发射.粒子能谱形状与平衡热源蒸发相一致,分析得到热源的核温度为完全熔合条件下的5.6MeV或非完全熔合条件下的5.2MeV .实验发现发射氚的数量特别大,这可能与目前广泛研究的⁶He的集团结构和同位旋效应有关.     

火花熔蚀-电感耦合等离子体光谱法分析地质矿物

火花熔蚀-电感耦合等离子体光谱法(SA-ICP)用于测量锆石中铪-锆比值和锰铁矿瘤中的铈、钴、铁、铅、镍和磷。用信背比和信嗓比的序贯单纯形优化法建立了用于高压火花和氩气ICP系统的六个操作参数。将磨细的样品与铜压成饼,从样品中熔蚀出的分析物和基体元素的原于发射信号的时间相关性给出一种用火花来作选择取样的方法。测量锆石中的铪、锆浓度比的精密度为4%(相对标准偏差)。对于锰铁矿瘤,根据分析线对锰(Ⅱ)257.610纳米线强度比的光谱测量结果达到分析精密度范围为7-14%(相对标准偏差)。分析的准确度用参比物USGS诺得(Nod)P-1的标准物加入法来决定,而与锰浓度的测量无关。     

STABLE SOLUTION OF TIME DOMAIN INTEGRAL EQUATION METHODS USING QUADRATIC B-SPLINE TEMPORAL BASIS FUNCTIONS

This paper is concerned with stable solutions of time domain integral equation （TDIE） methods for transient scattering problems with 3D conducting objects. We use the quadratic B-spline function as temporal basis functions, which permits both the induced currents and induced charges to be properly approximated in terms of completeness. Because the B-spline function has the least support width among all polynomial basis functions of the same order, the resulting system matrices seem to be the sparsest. The TDIE formula-tions using induced electric polarizations as unknown function are adopted and justified. Numerical results demonstrate that the proposed approach is accurate and efficient, and no late-time instability is observed.     

机械密封焊接金属波纹管膜片结构的有限元分析

在Linux操作平台下应用FAST_wmg有限元前后处理软件对机械密封焊接金属波纹管膜片建立了有限元模型并进行了非线性有限元分析．在同等条件下对焊接金属波纹管采用了S型膜片和V型膜片，并分别进行了有限元强度评价和对比分析．结果表明，两种膜片最大应力集中都在膜片两端周围发生．这与文献所叙述的波纹管的主要失效发生在膜片两端与焊谷接近的部位非常吻合，但是，在同样边界条件下，在同样位移量时S型膜片最大应力值比V型膜片最大应力值小，压缩量大．     

用^60Co放射源检测油垢厚度的初步实验研究

本文用石蜡模拟油垢，用^60Co放射源的1．25MeV平均能量的γ射线垂直入射，以一定的散射角和不同的探测立体角接收散射γ光子敫．发现散射γ计数与被测石蜡厚度之间存在不同的线性关系．结果发现，放射源与探测器之间屏蔽的好坏和合理的探测距离对提高线性度有很大关系．本实验测得最佳线性相关系数平方值为0．9981，平均测量精度为1．26mm．这对研究散射法检测油垢厚度和选择合适的探测距离提供了实验基础．     

A NOVEL METHOD FOR FABRICATING COMPOSITE MOSAIC MEMBRANE WITH UNIQUE NF SELECTIVITY

A novel method of fabricating composite mosaic membranes was studied on the basis of interracial polymerization （IP） by coating a thin selective layer onto the surface of a micro-porous hollow-fiber membrane, in which, 2,5-diaminobenzene sulfonic acid was used as one monomer of the IP reaction, and a mixture of trimesoyl chloride （TMCI） and 4-（chloromethyl） benzoyl chloride as the other monomer. Through the IP reaction a thin selective layer with negatively charged groups could be first formed on the polyethersulfone （PES） support membrane. Then trimethylamine solution was introduced to modify the IP layer through a quaternization reaction. Thus the selective layer of this composite membrane contained both negatively charged and positively charged groups to perform the mosaic functionality. Characterization of the composite mosaic membranes was carried out through permeation experiments using different inorganic salts and dyes. The experimental results showed that the membranes could permeate both mono- and bi-valent inorganic salts, but reject larger organic molecules. Such a mosaic membrane is potentially useful for the separation of salts from water-soluble organics, especially in dye and textile industries.     

圆形区域内香枞芽虫的分布模型

本文讨论圆形区域内芽虫分布模型,特别研究了芽虫与天敌接触时产生与避免outbreak状态的可能性。     

Toward phenanthridin-2-ylidene: electrophilicity versus acidity in planar-constrained C-aryl iminium salts

A phenanthridinium salt was prepared in four steps, including an intramolecular CH-arylation and a hydride abstraction reaction. Treatment with sterically demanding bases does not lead to the corresponding carbene, but rather to addition products: the planar-constrained geometry significantly enhances the electrophilicity over the acidity of C-aryl iminium salts.