Velocity measurement for moving surfaces using spatial filtering method based on area image sensor

The idea of using spatial filtering method to measure velocity of vehicles for an inertial navigation system is put forward. Corresponding optical system, including a 532 nm solid-state laser as active illumination, is established. A 17.92 mm × 14.34 mm area charge coupled device (CCD) is employed both as detector and as spatial filter. The spatial filtering characteristics are theoretically analyzed using a power spectral density function. The spatial filtering operation of CCD is performed fully by software. Therefore, the parameters of the spatial filter, such as the size and the number of spatial period, are changeable. In addition, the CCD is arranged as two differential spatial filters without any other additional elements. Experiments are carried out to examine the feasibility of CCD as two differential spatial filters and the influence of the number of spatial period on the signal frequency. The results indicate that the more number of spatial period the more accurate measurements can be obtained, and show that the relation between signal frequency and velocity has good linearity. So this velocimeter is suitable to provide velocity information for a vehicle self-contained inertial navigation system.     

基于CCD技术测量单缝衍射中中央明纹的相对光强

针对单峰衍射的特点,提出了一种基于CCD技术测量单缝衍射中,中央明纹的相对光强的方法,该方法利用CCD及相应软件的支持,拍摄出单缝衍射的明暗纹图谱,再利用origin pro.v7.5绘图软件经转置、数据统计分析,显示光强分布曲线和相对应的数据等,完成对中央明纹的相对光强计算。     

基于FPGA的超高速线阵CCD信号采集系统的设计与实现

线阵CCD已广泛应用于在线检测、图像识别等系统,目前高帧率采集系统多在200~500Hz之间。高速线阵CCD采集系统,如1K甚至10KHz以上的采集要求,设计难度大,电路实现复杂,需要专用处理器,产品成本高,提出了一种采用并行高速FPGA驱动线阵CCD,通过常规分立元件完成模拟信号处理,实现数字信号实时传输的方案。该方案不仅简化了硬件设计上的难度,在同等性能情况下,可实现每秒万帧的高速采样,大幅度降低了成本。方案选用Altera FPGA作为控制核心,实现高速信号采集的同时,在片上实现一定的图像算法,不仅加速了图像处理速度,同时降低了计算机的处理压力。最后,本电路通过USB2.0接口,完成数据的实时传输。设计具有高帧率、高灵敏度、性能稳定,便携使用等特点,同时还有一定的通用性,已应用于一些光学系统中。     

扫描镜稳定度对TDI CCD测量精度的影响

利用TDI CCD成像数值仿真模型,研究了TDI CCD测量系统的测角精度随扫描镜速度稳定度的变化规律。首先根据TDI CCD推扫成像的物理过程,建立了数值仿真模型,设计了从光学像和扫描镜稳定度到数字图像的仿真链路;然后利用图像重心计算方法求取图像中心坐标并得到目标点的角位置坐标;通过蒙特卡诺法进行海量打靶试验,对结果进行统计得到扫描镜各稳定度水平上的测量精度值;最后将某工程样机的扫描镜速度稳定度带入仿真模型,仿真结果表明：测试误差增大5.67 μrad,达到了像元角分辨率的1/4。在光学测量系统的系统设计时,需要考虑像元分辨率及扫描镜稳定度的综合影响,选用合适的扫描镜稳定度要求,使测量角分辨率满足用户需求。     

HL-2A Tokamak Gas Puff Imaging

Gas puff imaging （GPI） is one of the important diagnostics for the （ITPAC international tokamak physics activity ） and entering the ITPA IDD （ international diagnostics database ） . GPI is related to many investigations, for example, edge radiations, etc.     

D. CCD视频技术、等离子体诊断和脉冲辐射摄影

本文对CCD摄象技术、等离子体诊断和脉冲辐射摄影的国内外最新发展作了评述,并涉及到在高技术领域的应用。     

机车轮对轴颈高精度动态检测技术的研究

通过对线阵CCD成像系统的研究,提出了机车轮对轴颈磨损的CCD成像拼接动态检测方法,分析了该方法的可行性.讨论了斜光束照射、背景光强变化等因素,这些因素降低了系统的测量精度.最后通过实验系统证明了该方法的可靠性.     

3D building reconstruction from aerial CCD image and sparse laser sample data

An approach for 3D building reconstruction automatically based on aerial CCD image and sparse laser scanning sample points is presented in this paper. The geometry shape of a building is shown very clearly in the aerial high-resolution CCD image, so we use Laplacian sharpening operator and threshold segmentation to extract the edges of CCD image first, and then pixel connectivity is used to extract the linear features in the CCD image. Bi-direction projection histogram and line matching are proposed to extract the contours of buildings. The height of the building is determined from sparse laser sample points which are within the contour of the buildings extracted from CCD image; therefore the 3D information of each building is reconstructed. We reconstruct 3D buildings correctly by this approach using real aerial CCD and sparse laser rangefinder data.     

多媒体在二维动量实验中的应用

利用VisualBasic的多媒体功能和CCD摄像头以及气垫桌等组成的实验系统，演示了二维碰撞中的动量守恒．