单晶硅晶格间距的测量技术进展及应用

单晶硅晶格间距是许多重要物理常数测量的基础。本文介绍了硅晶格间距测量技术的发展历程,包括X射线干涉仪直接测量和晶格比较仪间接测量两种方法,以及影响测量结果不确定度的关键因素。得益于晶格间距测量的进展,在纳米尺度,硅晶格间距被国际计量局(BIPM)批准成为新的米定义复现形式。最后介绍了硅晶格在计量学中的应用,以及基于硅晶格实现纳米几何量测量的溯源体系的研究趋势。     

棒状PANI/TiO2纳米复合材料的制备及光催化性能研究

通过共混法和原位氧化聚合法成功制备了棒状聚苯胺/TiO2纳米复合材料,通过SEM、XRD、FT-IR、TGA、TEM、紫外-可见漫反射光谱等测试对其进行表征.并以罗丹明B溶液为模拟污染物,在可见光条件下,棒状PANI/TiO2纳米复合材料的催化降解效率与纯PANI和TiO2相比明显提高.另外,对两种不同方法合成的PANI/TiO2纳米复合材料的光催化性能进行对比,结果表明原位氧化聚合法制得的复合材料,由于TiO2在复合材料中的均匀分布及其与PANI的协同效应,光催化降解率可达91.11;.     

CoP纳米片制备及其电催化产氢性能的研究

高稳定性的催化剂对于规模化电催化产氢起着关键的作用.因此,采用简单的方法合成CoP纳米片,其表现出优越电催化活性和稳定性. CoP纳米片采用水热法和在氩气中磷化法制备的,纳米片的厚度为100～300 nm.CoP纳米片在0.5 M H2SO4的电解质中,表现出良好的电化学产氢性能,起始过电为～75 mV,塔菲尔斜率为～39. 67 mV/decade,当电流密度为10 mA· cm-2,过电压为～125 mV,经过1000次的循环后,保持良好的稳定性能.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

改性二氧化硅纳米颗粒提高二氧化碳泡沫稳定性的研究

通过纳米二氧化硅的硅烷化改性, 使其在高矿化度盐水中可以稳定存在的前提下, 研究了改性纳米颗粒与阳离子表面活性剂十二烷基三甲基氯化铵混合体系的溶液稳定性及协同稳定CO₂泡沫的效果. 研究结果表明, 无机盐离子对改性纳米颗粒与阳离子表面活性剂间的静电吸引力具有屏蔽作用, 且矿化度越高, 屏蔽效果越明显, 从而混合溶液更易于在高盐水中稳定; 纳米颗粒表面的活性剂吸附层受二者浓度的影响, 进而影响了颗粒的亲/疏水性; 当混合体系中的表面活性剂浓度低于临界胶束浓度(CMC)时, 混合溶液与CO₂的界面张力高于单独活性剂溶液, 而当活性剂浓度高于CMC时, 对CO₂-溶液界面张力几乎无影响, 最低界面张力可降至6 mN/m左右; 改性纳米颗粒的加入可以进一步提高CO₂体相泡沫半衰期一倍以上, 但受二者浓度比例的影响; 纳米颗粒的加入有效提高了多孔介质中泡沫的表观黏度, 最大增幅由20 mPa·s增至55 mPa·s左右, 泡沫黏度增加接近3倍, 增强了CO₂泡沫驱的封堵作用.     

新试剂2⁃萘酚乙酰酪氨酸二氨基苯甲酰替胺的合成及铜(Ⅱ)的测定研究

以4,4′-二氨基苯甲酰替苯胺、2-萘酚和乙酰酪氨酸为原料,合成了一种新型的4,4′-二氨基苯甲酰替苯胺偶氮试剂2-萘酚乙酰酪氨酸二氨基苯甲酰替胺(2-NATDAB),研究了该试剂与铜(Ⅱ)的显色反应.结果表明,在聚乙二醇辛基苯基醚的存在下,pH=6的磷酸氢二钠-柠檬酸缓冲溶液中,2-NATDAB能与铜(Ⅱ)发生显色反应,铜(Ⅱ)与其形成物质的量比为1∶1的配合物,紫外可见吸收光谱最大吸收波长位于490 nm.建立了一种测定铜(Ⅱ)的光度分析新方法,线性范围为0.25～1.25×10~(-5) mol/L,该方法可用于水质中铜(Ⅱ)的直接测定.     

参外联合激励下的簇发振荡及其机理

当周期激励频率远小于系统固有频率时，会存在快慢耦合效应，与单项激励不同，参外联合激励不仅会导致快子系统平衡曲线和分岔行为的复杂化，也会产生一些特殊的非线性现象，为此，本文以两耦合Hodgkin-Huxley细胞模型为例，引入周期参外联合激励，探讨在频域不同尺度耦合时该系统的簇发振荡的特点及其分岔机制．通过建立相应的快慢子系统，得到慢变参数变化下的快子系统的各种分岔模式以及相应的分岔行为，结合转换相图，揭示耦合系统随激励幅值变化时的动力学行为及其机理．研究表明，在激励幅值较小时，系统表现为概周期振荡，两频率分别近似于快子系统平衡曲线由Hopf分岔引起的两稳定极限环的振荡频率．概周期解随激励幅值的增加进入簇发振荡，导致这些簇发振荡的主要原因是在慢变参数变化的部分区间内，存在唯一稳定的平衡曲线，使得系统的轨迹逐渐趋向该平衡曲线，产生沉寂态，并随着慢变参数的变化，由分岔进入激发态．同时，快子系统中参与簇发振荡的稳定吸引子随激励幅值的变化也会不同，导致不同形式的簇发振荡．另外，与单项激励下的情形不同，联合激励时快子系统的部分稳定吸引子掩埋在其它稳定吸引子内，从而失去对簇发振荡的影响．