棒状PANI/TiO2纳米复合材料的制备及光催化性能研究

通过共混法和原位氧化聚合法成功制备了棒状聚苯胺/TiO2纳米复合材料,通过SEM、XRD、FT-IR、TGA、TEM、紫外-可见漫反射光谱等测试对其进行表征.并以罗丹明B溶液为模拟污染物,在可见光条件下,棒状PANI/TiO2纳米复合材料的催化降解效率与纯PANI和TiO2相比明显提高.另外,对两种不同方法合成的PANI/TiO2纳米复合材料的光催化性能进行对比,结果表明原位氧化聚合法制得的复合材料,由于TiO2在复合材料中的均匀分布及其与PANI的协同效应,光催化降解率可达91.11;.     

CoP纳米片制备及其电催化产氢性能的研究

高稳定性的催化剂对于规模化电催化产氢起着关键的作用.因此,采用简单的方法合成CoP纳米片,其表现出优越电催化活性和稳定性. CoP纳米片采用水热法和在氩气中磷化法制备的,纳米片的厚度为100～300 nm.CoP纳米片在0.5 M H2SO4的电解质中,表现出良好的电化学产氢性能,起始过电为～75 mV,塔菲尔斜率为～39. 67 mV/decade,当电流密度为10 mA· cm-2,过电压为～125 mV,经过1000次的循环后,保持良好的稳定性能.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

改性二氧化硅纳米颗粒提高二氧化碳泡沫稳定性的研究

通过纳米二氧化硅的硅烷化改性, 使其在高矿化度盐水中可以稳定存在的前提下, 研究了改性纳米颗粒与阳离子表面活性剂十二烷基三甲基氯化铵混合体系的溶液稳定性及协同稳定CO₂泡沫的效果. 研究结果表明, 无机盐离子对改性纳米颗粒与阳离子表面活性剂间的静电吸引力具有屏蔽作用, 且矿化度越高, 屏蔽效果越明显, 从而混合溶液更易于在高盐水中稳定; 纳米颗粒表面的活性剂吸附层受二者浓度的影响, 进而影响了颗粒的亲/疏水性; 当混合体系中的表面活性剂浓度低于临界胶束浓度(CMC)时, 混合溶液与CO₂的界面张力高于单独活性剂溶液, 而当活性剂浓度高于CMC时, 对CO₂-溶液界面张力几乎无影响, 最低界面张力可降至6 mN/m左右; 改性纳米颗粒的加入可以进一步提高CO₂体相泡沫半衰期一倍以上, 但受二者浓度比例的影响; 纳米颗粒的加入有效提高了多孔介质中泡沫的表观黏度, 最大增幅由20 mPa·s增至55 mPa·s左右, 泡沫黏度增加接近3倍, 增强了CO₂泡沫驱的封堵作用.     

基于PSO-HJ算法的多无人机协同航迹规划方法

针对多无人机协同航迹求解计算量大、难以收敛等问题,提出了一种基于粒子群优化和Hook-Jeeves (PSO-HJ)搜索算法相融合的多无人机时间协同三维航迹规划方法。首先,建立了单无人机航迹规划求解模型。然后,通过对适应度评价函数值低的粒子引入Hooke-Jeeves搜索算法,提高了粒子多样性,改善了航迹规划算法收敛性;对不满足约束的粒子引入约束违反度函数,基于比较准则提出了一种新的粒子评价机制,促进粒子搜索位于约束边界的最优解,加快了航迹规划算法的计算效率。最后,设计了一种多无人机时间协同航迹规划求解算法,利用PSO-HJ算法先分别求解单无人机航迹信息,通过多无人机集中航迹规划层协调到达时间实现协同航迹规划。仿真结果表明,PSO-HJ算法的精度比量子粒子群(QPSO)算法精度提高了20.85%,比PSO算法精度提高了58.14%,更适用解决实际复杂的多机协同规划问题。     

基于能量变化的微尺度金属应变突变准则研究

微尺度金属在塑性变形过程中呈现出显著的应变突变特性。本文以力加载条件下单晶Ni微米柱体和位移加载下Au纳米柱体为对象，探讨应变突变的判定准则与不同特征阶段的判别条件。首先从经典塑性理论Hill稳定性条件出发，分析微柱体变形过程中的动能变化，提出了应变突变发生与结束的判定准则。进一步分析柱体变形过程中的内能变化，结合动能变化的分析结果，给出了微尺度金属不同变形阶段的判别条件。通过与文献中实验与理论结果对比发现，基于动能变化的应变突变判定准则能够判断应变突变的发生与结束，基于能量变化的判别条件可以有效区分微柱体的不同变形阶段。最后对新理论准则的可靠性与适用性进行了讨论。     

基底纹理对镍/铜纳米双层膜刮擦行为影响的分子动力学模拟

采用分子动力学模拟研究纳米尺度下的镍/铜双层膜的表面刮擦响应. 考虑基底铜膜材料的不同表面纹理，建立分子动力学模拟模型，分析了纳米双层膜不同基底纹理下的刮擦响应，并且对比了两种典型基底纹理下不同刮头半径、不同刮擦深度对纳米双层膜刮擦响应的影响. 研究结果发现:不同的基底纹理下，位错缺陷程度的不同会导致刮头前方的切屑体积不同，存在切屑体积最大的基底纹理；针对两种典型基底纹理，在刮擦深度或刮头半径一定时，刮擦力随刮头半径或刮擦深度的增加而增大；当刮擦深度或刮头半径超过临界值时，表面具有特定齿槽纹理的基底具有一定的减摩作用.