稀有气体二聚体基准集NgD×15构建及其对DFT方法的评价

基准集是训练和评价量子化学计算方法的重要工具,稀有气体二聚体Ng_2作为重要的弱色散体系,目前为止仍没有一个较为完整、精确的基准集,最近Head Gordon研究组发表MGCD84数据库时,其RG10基准集仍沿用了Tang-Toennies经验势.本文首先以He_2为例,证明了在CCSD(T)水平,使用中点键函数{6s6p6d3f2g1h}的aug-cc-pV5Z基组收敛性;并在CCSD(T)/aug-cc-pV5Z-{6s6p6d3f2g1h}水平下,经BSSE均衡校正后,获得了He_2至Rn_2全部同核稀有气体二聚体的15点相互作用势,构建了NgD×15基准集.并以此为标准,重新评价了目前常用的DFT的非局域和色散校正方法.总体上,非局域校正的精度较D3色散校正高,ωB97X-V及ωB97X-rV两种方法是该体系最优性价比的DFT-NL方法.     

X射线激光首次揭示化学键形成过程

利用SLAC国家加速器实验室的X射线激光进行实验,研究人员首次拍摄到化学键形成过程中的过渡状态:原子形成一种不确定的键。反应物是一氧化碳分子(左边,由一个碳原子(黑)和一个氧原子(红)构成)和它右边的一个氧原子。它们附着在钌催化剂表面,催化剂让它们彼此靠近,更容易反应。发射一束光学激光脉冲,反应物振动并互相碰撞,碳原子和氧原子     

重分析 巧变形 抓特点 再换元

《中学生数学》2014年第5期刊登了康宇老师的文章《学会运用换元法》,文中总结出了利用换元法注意的四个问题,即等价性、必要性、多样性、求简性.阅后受益匪浅.因此对换元法作了进一步的研究,总结出了学好换元法必须做到：＂重分析、巧变形、抓特点、再换元＂.下面举例说明,供读者参考.     

无序激光晶体及其超快激光研究进展

激光是受激辐射的光放大,所辐射的波长取决于增益介质中关键电子的能级结构,特别是其最外层电子的状态决定了可能实现的激光特性。激光发展60年来,激光晶体作为激光的重要激活材料,推动了激光技术的进步和普及,是一个研究历史长而又异常活跃的研究领域。当前,超短超强脉冲激光在加工、医疗、国防等关系国计民生的领域有重要需求,适合超短超强激光的激光晶体成为了本领域的研究热点,其关键是揭示最外层电子的影响因素及设计和生长具有宽波段发射性能的激光晶体。本论文从探讨影响激活离子光谱性能的关键因素出发,综述了以本课题组十余年研究的10余种无序激光晶体为主要部分的研究结果和进展,涉及晶体生长、晶体物理、激光器件设计及应用等工作,包含了高级、中级和低级对称性晶体及其获得的最短脉冲激光结果,希望能为本领域的后续研究提供一定的参考和借鉴。     

柠檬果茶中游离态和键合态挥发性成分分析

以柠檬果茶为研究对象,建立了顶空固相微萃取前处理结合气相色谱质谱联用技术测定其中挥发性化合物的分析方法。采用开水冲泡对样品进行提取,通过Amberlite XAD-2大孔吸附树脂对柠檬果茶中的糖苷类挥发性组分键合,分离游离态和键合态化合物,甲醇溶剂作为洗脱剂对键合态化合物进行洗脱,Almondsβ-D-葡萄糖苷酶对其酶解。使用气质联用对样品中游离态和键合态挥发性成分进行检测,其结果根据数据库匹配和对比文献保留时间定性,内标法进行定量。结果表明,柠檬果茶中含有游离态物质24种,键合态物质16种,主要为(+)-柠檬烯、1-辛醇、橙花醇、(-)-4-萜品醇、alpha-松油醇等。方法为花果茶干燥工艺提供参考。     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

能量连续传递的超分子人工光捕获系统构筑及其在光催化反应中应用

光捕获系统在自然界光合作用过程中起着至关重要的作用.模拟自然界的光捕获体系,在生物成像、发光器件、光催化以及解决人类面临的能源问题等方面均具有重要意义[1].目前,在水相中构筑高效的人工光捕获系统已取得一系列重要进展[2].然而,为了更好地理解并模拟自然界中以多通道信息通讯为特征的捕光天线系统[3],构筑具有多步连续能量转移特征并能实现光能到化学能转化的人工光捕获体系仍然是一项具有挑战性的工作.     

形状记忆合金椭圆孔口问题的有限单元法

基于Lagoudas形状记忆合金(SMA)三维本构模型,假设材料为各向同性,推导了SMA平面应力状态的增量型本构方程,继而编写了ABAQUS用户自定义材料(UMAT)子程序,研究了在双向拉伸情况下,外载荷、温度、椭圆孔口长短轴之比对超弹性SMA椭圆孔口板中应力诱发马氏体相变区的影响。数值结果表明:应力诱发马氏体相变首先发生在椭圆孔口长轴端点部位,在外加载荷作用下逐渐扩展到板内,并由内向外形成马氏体相区、相变混合区和奥氏体相区;SMA板内应力诱发马氏体完全相变区面积与施加外载荷成正相关,与温度成负相关;随着椭圆孔口长短轴之比增大,SMA板内应力诱发马氏体完全相变区面积呈现出先减小后增大的趋势;拉应力差值相同时,相较于拉应力沿椭圆孔口长轴方向较大的情况,当拉应力沿椭圆孔口短轴方向较大时,SMA板内完全相变区面积较大,椭圆孔口周边应力集中现象更明显。     

基于移动可变形孔洞方法的超弹性结构拓扑优化

现有隐式拓扑优化方法在进行超弹性结构拓扑优化设计时，具有设计变量多、中间设计有限元分析存在严重的收敛性和设计结果无法直接导入CAD/CAE系统等问题。为解决这些问题，提出了一种基于移动可变形孔洞的显式拓扑优化方法来进行承受大变形的超弹性结构设计，材料本构采用常用的Mooney-Rivlin模型。首先，介绍了移动可变形孔洞方法的基本思想和可变形孔洞的显式描述方法；其次，构造了基于移动可变形孔洞方法的超弹性结构拓扑优化的数学列式，给出了相应的灵敏度结果；最后，通过数值算例验证了本方法的有效性。数值结果表明，该方法可以通过较少的设计变量和非常稳健的优化过程，给出边界由B样条曲线描述且可与CAD/CAE软件无缝连接的超弹性结构设计。