溶剂化金属原子浸渍法制备的Ni-Ag/γ-Al2O3催化剂的结构表征

应用溶剂化金属原子浸渍法和普通浸渍法制备了三种不同摩尔比的γ－Ａｌ２Ｏ３负载Ｎｉ－Ａｇ双金属催化剂。ＸＲＤ和磁测定结果表明ＳＭＡＩ催化剂中Ｎｉ和Ａｇ的粒度均小于金属相同的ＣＩ催化剂。ＳＭＡＩ催化剂中Ｎｉ和Ａｇ未形成合金，而ＣＩ催化剂中Ｎｉ和Ａｇ形成了合金。     

WxC-MCM-48催化剂的合成、表征及加氢脱硫催化性能

以正硅酸乙酯(TEOS)为硅源，十六烷基三甲基溴化铵(CTAB)为表面活性剂，仲钨酸铵为钨源，采用水热晶化法一步合成了不同钨含量(以Si、W物质的量比n_Si/n_W表示)的WO₃-MCM-48，然后经甲烷/氢气(V/V=1/4)混和气体程序升温还原碳化(TPC)，制备出了W_xC-MCM-48(x=1、2)催化剂，采用XRD、N₂吸附-脱附和NH₃-TPD对样品的结构进行了表征，用噻吩作为模型化合物，对W_xC-MCM-48催化剂的加氢脱硫催化活性进行了评价。结果表明，在一定钨含量的条件下，WO₃-MCM-48和W_xC-MCM-48样品仍然保持MCM-48的三维立方有序介孔结构，n_Si/n_W=30～15时，碳化钨的物相为W₂C；n_Si/n_W=7.5时，碳化钨为W₂C和WC物相，W_xC-MCM-48催化剂表现出了良好的加氢脱硫催化性能。     

铂-金交替修饰的铂核纳米颗粒的制备与表征

通过吸附在铂纳米颗粒表面的氢交替还原氯金酸和氯铂酸,得到了复合型纳米颗粒Pt@Au/Pt,用UV-Vis光谱、TEM和XRD对其进行了表征.     

XRD study of the dehydration and rehydration behaviour of Al-pillared smectites differing in source of charge

The swelling properties of Al-pillared clays, obtained from five different smectites, were studied using X-ray diffraction. These clays, the dioctahedral beidellite and montmorillonite and the trioctahedral saponite, hectorite and laponite differ in source of isomorphic substitution and represent a series of decreasing basicity along the siloxane plane. An Al oxyhydroxy cation was inserted between the layers to form the respective pillared clays and these clays were heated incrementally to 600°C. The XRD peaks at each stage of heating were recorded as well as the same samples subsequently wetted. Basal spacings of each clay at each stage of dehydration d rehydration indicated that the swelling of tetrahedrally substituted saponite and beidellite was indeed restricted, compared with the other three clays. This was attributed to greater basicity of the oxygen plane of beidellite and saponite due to tetrahedral substitution of Si by Al, resulting in an increase in the strength of hydrogen bonds between either water or the interlayer polyhydroxy cation and the clay.The data from the XRD analyses helped in addition, to clarify the thermal transformations of the Keggin ion itself. According to the changes in thed-spacings of the pillared clays it was concluded that the Keggin ion lost its structural water at 200°C and dehydroxylated in a range beginning at 350°C. Between 500 to 600°C this polymer cation, which is thought to form the Al₂O₃ oxide, did not rehydrate.Dedicated to Prof. Menachem Steinberg on the occasion of his 65th birthdayThe authors wish to thank Laporte Industries, Inc., U.K. for the laponite sample.     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.     

纳米结构TiO2／SiO2的逐层自组装

采用逐层自组装方法在二氧化硅球表面交替组装了十二烷基硫酸钠单分子膜和 二氧化钛纳米粒子膜，该复合多层膜经高温假烧后得到了核壳型纳米结构二氧化钛 ／二氧化硅复合颗粒．利用XRD，SEM，X射线能谱等对复合颗粒进行了表征．结果 表明：二氧化肽在复合颗粒表面排列紧密、均匀，粒径在50nm左右，为锐钛矿型结 构．复合颗粒中二氧化肽的含量随组装层数的增加而均匀增加．     

Catalytic Oxidation of Dimethyl Ether to Dimethoxymethane over Cs Modified HaPW12O40/SiO2 Catalysts

The attractive utilization route for one-step catalytic oxidation of dimethyl ether to dimethoxymethane was successfully carried out over the H3PW12O40（40%）/SiO2 catalyst, modified by Cs, K, Ni, and V. The Cs modification of H3PW12O40（40%）/SiO2 gave the most promising result of 20% dimethyl ether conversion and 34.8% dimethoxymethane selectivity. Dimethoxymethane could be synthe- sized via methoxy groups decomposed from dimethyl ether through the synergistic effect between the acid sites and the redox sites of Cs modified H3PW12O40（40%）/SiO2.     

利用跟踪TPR—GC和XRD技术考察LaNiO3的还原机理

钙钛矿型复合氧化物对许多反应具有较高的催化活性,它们被广泛地用作CO氧化的催化剂.陈水华等对SmMeO_3(Me:V、Cr、Mn、Fe、Co)和Tascon等对LaMeO_3(Me:V、Cr、Mn、Fe、Co、Ni)上CO催化活性评价说明,LnMnO_3和LnCoO_3(Ln=La、Sm)活性最好,而LaNiO_3则表现和LaCoO_3相似活性,由此可推断这些氧化物具有相似的催化性能.本文用TPR-GC和XRD考察了在还原气氛下,LaNiO_3的还原机理,这对研究其电、磁特性具有一定的指导意义.     

Crystal structure of hexagonal SrAl2O4 at 1073 K

The crystal structure of SrAl₂O₄ at 1073 K was determined from conventional X-ray powder diffraction data using direct methods, and it was further refined by the Rietveld method. The structure was hexagonal (space group P6₃, Z=6) with a=0.89260(3) nm, c=0.84985(2) nm and V=0.58639(3) nm³. Final reliability indices were R_wp=7.87%, R_p=5.87% and R_B=4.19%. The [AlO₄] tetrahedra are linked to form trigonally distorted rings and they are joined in layers. These layers are stacked with a two-layer repeat and connected by the tetrahedral apices. All of the Sr atoms occupy the centers of the rings when viewed along the c-axis. The structure is described as a stuffed derivative of tridymite.     

Dehydration and crystallization process in sol-gel zirconia

Sol-gel zirconia was characterized using high-resolution thermogravimetry (Hi-Res TG) and differential scanning calorimetry (DSC) and compared with X-ray diffraction, Raman scattering, and UV-Vis spectroscopy. ZrO_2-x(OH)_2x·yH₂O annealed below 400°C show typical behavior of amorphous material. As the annealing temperature is increased, the tetragonal and monoclinic phases crystallize. Typical Hi-Res TG curve shows that the samples are continuously dehydrated in a long temperature range, between room temperature and 600°C. The total mass loss relative to the initial mass is of about 29%. The DSC analysis coupled with TG and structural information, indicate that the exothermic processes about 355 and 447°C can be related to the nucleation process of the formation of tetragonal zirconia, with bulk crystallization at 447°C. This revised version was published online in July 2006 with corrections to the Cover Date.