袖珍式简易显微镜光路的设计与实验

组织学生自行设计制作了袖珍式简易显微镜. 该显微镜角放大率为100×,镜筒长度105 mm,直径20 mm,并给出目镜和物镜的结构、材料的选择和各透镜的加工参数.     

菠萝蜜微量元素含量的分析

应用电感耦合等离子体发射光谱仪(ICP—AES)，对菠萝蜜各个部位进行了微量元素成分的测定分析，其结果为菠萝蜜的综合开发利用提供依据。     

Thermochemical Properties and Decomposition Kinetics of Ammonium Magnesium Phosphate Monohydrate

Ammonium magnesium phosphate monohydrate NH4MgPO4·H2O was prepared via solid state reaction at room temperature and characterized by XRD, FT-IR and SEM. Thermochemical study was performed by an isoperibol solution calorimeter, non-isothermal measurement was used in a multivariate non-linear regression analysis to determine the kinetic reaction parameters. The results show that the molar enthalpy of reaction above is （28.795 ± 0.182） kJ/mol （298.15 K）, and the standard molar enthalpy of formation of the title complex is （-2185.43 ± 13.80） kJ/mol （298.15 K）. Kinetics analysis shows that the second decomposition of NH4MgPO4·H2O acts as a double-step reaction： an nth-order reaction （Fn） with n=4.28, E1=147.35 kJ/mol, A1=3.63×10^13 s^-1 is followed by a second-order reaction （F2） with E2=212.71 kJ/mol, A2= 1.82 × 10^18 s^-1.     

车前草的微量元素含量分析

用电感耦合等离子体发射光谱法测定了湛江地区的车前草中微量元素的含量,发现其Ca、Mn、Zn、Fe、Mg、P、Cu等元素的含量都比较丰富,并讨论了这些有益元素与人体健康的关系。     

立体选择性合成2-呋喃甲酰基-3-芳基-4-乙氧羰基-5-甲基-反式-2,3-二氢呋喃

溴化呋喃甲酰基甲基三苯鉮1与2-乙酰基-3-芳基丙烯酸乙酯2以碳酸钾为碱，在四氢呋喃中室温反应，可以较好的收率、高立体选择性地生成反-2-呋喃甲酰基-3-芳基-4-乙氧羰基-5-甲基-2,3-二氢呋喃3。产物结构均经波谱予以确定。本文还提出了生成产物的可能机理。     

葡萄酒糟色素的提取及稳定性研究

用树脂吸附、膜分离方法处理葡萄酒糟色素提取液.并将色素提取液对热、光和长时间放置的稳定性进行了评价.     

页岩裂缝系统产量预测的敏感性研究

考虑气体渗流、解吸附效应、储层压缩性和滑脱效应,建立了页岩裂缝系统产能的全耦合数学模型.采用有限元方法求解基质和裂缝流场,计算结果与已有的研究结果吻合,验证了模型的正确性.在此基础上,分析了裂缝半长、条数、间距等参数对产能的影响以及解吸附效应对产能的作用.结果表明:裂缝参数之间存在相互作用.裂缝半长对产能的影响最大,裂缝条数的优化与裂缝半长有关;在生产中后期,解吸附效应可以提供相当可观的气体产量,对稳定产能有重要意义.该模型可以为页岩压裂设计提供理论指导.     

纳米ZnO/聚合物器件的制备及应用

近年来,氧化锌(ZnO)由于依赖于尺寸、形状的光电特性而备受关注。纳米ZnO尺寸较小、表面能高,易团聚,使其在光电、生物等方面的应用受到限制。将其与聚合物复合或组装,不但能稳定纳米ZnO,而且可以使纳米ZnO/聚合物复合材料具有优良性能。本文综述了近年来纳米ZnO/聚合物复合材料的制备方法(聚合物辅助、表面接枝、转移分散等法)及纳米ZnO/聚合物器件在电致发光、光伏电池、荧光成像等方面的应用,并对纳米ZnO/聚合物复合材料的发展做了展望。     

The beam-based calibration of an X-ray pinhole camera at SSRF

A pinhole camera for imaging X-ray synchrotron radiation from a dipole magnet is now in operation at the Shanghai Synchrotron Radiation Facility (SSRF) storage ring. The electron beam size is derived by unfolding the radiation image and the point spread function (PSF) with deconvolution techniques. The performance of the pinhole is determined by the accuracy of the PSF measurement. This article will focus on a beam-based calibration scheme to measure the PSF system by varying the beam images with different quadrupole settings and fitting them with the corresponding theoretical beam sizes. Applying this method at SSRF, the PSF value of the pinhole is revised from 37 to 44 μm. The deviation in beam size between the theoretical value and the measured value is minimized to 4% after calibration. This optimization allows us to observe the horizontal disturbance due to injection down to as small as 0.5 μm.