Dy(Tyr)(Gly)3Cl3·3H2O的热化学和热分解动力学研究

以氯化镝、甘氨酸和L-酪氨酸为原料合成了配合物Dy(Tyr)(Gly)₃Cl₃·3H₂O. 用溶解-反应热量计测得配合物在298. 15K时的标准摩尔生成焓为–(4287. 10±2. 14) kJ / mol. 并用TG-DTG技术对配合物进行了非等温热分解动力学研究, 推断出配合物第二步热分解反应的动力学方程为: dα/dT＝3. 14 ×10²⁰ s^-1/βexp(-209. 37 kJ / mol /RT)(1-α)².     

环丙沙星-钨硅多金属氧酸盐的制备及热分解动力学

A new polyoxometalate （CPFX·HCl）3H4SiW12O40·10H2O was prepared from ciprofloxacin hydrochloride and H4SiW12O40·nH2O in aqueous solution, and characterized by elemental analysis, IR spectra and DTA-TG-DTG techniques. The IR spectrum confirmed the presence of Keggin structure and the characteristic functional group for ciprofloxacin in the compound. The TG-DTA-DTG curves showed that its thermal decomposition was a four-step process consisting of simultaneous collapse of Keggin type structure. The residue of decomposition was the mixture of WO3 and SiO2, confirmed by X-ray diffraction and IR spectroscopy. The decomposition mechanism and nonisothermal kinetic parameters of the polyoxometalate were obtained from an analysis to the TG-DTG curves by the single scanning methods （the Achar method and Coats-Redfern method） and the multiple scanning methods （the Kissinger method, Flynn-Wall-Ozawa method and Starink method）. The results indicate that the kinetic equationswith parameters describing the thermal decomposition reaction are dα/dt=6.65×10^6[3（1-α）^2/3]e^-10495.5/T with E=87.26 kJ/mol and A=6.65×10^6 s^-1 for the second step,dα/dt=7.01×10^9（1-α）e^-18770.7/T with E=156.06 kJ/mol and A=7.01×10^9 s^-1 for the third step,dα/dt=9.77×10^43[（1-α）^2]e^-88980.0/T with E=739.78 kJ/mol and A=9.77×10^43 s^-1 for the fourth step.     

1，1－二氨基2，2－二硝基乙烯（DADE）的热化学性质、热行为和热分解机理

The constant-volume combustion energy, △cU （DADE, s, 298.15 K）, the thermal behavior, and kinetics and mechanism of the exothermic decomposition reaction of 1,1-diamino-2,2-dinitroethylene （DADE） have been investigated by a precise rotating bomb calorimeter, TG-DTG, DSC, rapid-scan fourier transform infrared （RSFT-IR） spectroscopy and T-jump/FTIR, respectively. The value of △cHm （DADE, s, 298.15 K） was determined as （-8518.09±4.59） j·g^-1. Its standard enthalpy of combustion, △cU （DADE, s, 298.15 K）, and standard enthalpy of formation, △fHm （DADE, s, 298.15 K） were calculated to be （-1254.00±0.68） and （- 103.98±0.73） kJ·mol^-1, respectively The kinetic parameters （the apparent activation energy Ea and pre-exponential factor A） of the first exothermic decomposition reaction in a temperature-programmed mode obtained by Kissinger＇s method and Ozawa＇s method, were Ek=344.35 kJ·mol^-1, AR= 1034.50 S^-1 and Eo=335.32 kJ·mol^-1, respectively. The critical temperatures of thermal explosion of DADE were 206.98 and 207.08 ℃ by different methods. Information was obtained on its thermolysis detected by RSFT-IR and T-jump/FTIR.     

铀(Ⅵ)与不对称希夫碱配合物的合成和热分解反应动力学

邻苯二胺与5－氯－2－羟基二苯酮、邻香草醛作用合成了一种不对称希夫碱配体C₂₇H₂₁N₂O₃Cl（H₂L）。在正丁醇和甲醇体系中硝酸铀酰与该配体反应合成了一种固体希夫碱配合物[UO₂(HL)(NO₃)(H₂O)]·H₂O。通过元素分析、IR、UV、¹H NMR、TG-DTG及摩尔电导率分析等手段对合成的配合物进行了表征,用非等温热重法研究了铀(Ⅵ)配合物的热分解反应动力学,推断出第三步热分解的动力学方程为：d α /d t = A · e^{- E/RT} ·3/2[(1- α )^-1/3-1]^-1,得到了动力学参数E和A。并计算出了活化熵△S^¹和活化吉布斯自由能△G^¹。     

Low-temperature heat capacities and standard molar enthalpy of formation of the complex

Low-temperature heat capacities of a solid complex Zn(Val)SO₄·H₂O(s) were measured by a precision automated adiabatic calorimeter over the temperature range between 78 and 373 K. The initial dehydration temperature of the coordination compound was determined to be, T _D=327.05 K, by analysis of the heat-capacity curve. The experimental values of molar heat capacities were fitted to a polynomial equation of heat capacities (C _p,m) with the reduced temperatures (x), [x=f (T)], by least square method. The polynomial fitted values of the molar heat capacities and fundamental thermodynamic functions of the complex relative to the standard reference temperature 298.15 K were given with the interval of 5 K. Enthalpies of dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] (Δ_sol H _m,l ⁰) and the Zn(Val)SO₄·H₂O(s) (Δ_sol H _m,2 ⁰) in 100.00 mL of 2 mol dm^–3 HCl(aq) at T=298.15 K were determined to be, Δ_sol H _m,l ⁰=(94.588±0.025) kJ mol^–1 and Δ_sol H _m,2 ⁰=–(46.118±0.055) kJ mol^–1, by means of a homemade isoperibol solution–reaction calorimeter. The standard molar enthalpy of formation of the compound was determined as: Δ_f H _m ⁰ (Zn(Val)SO₄·H₂O(s), 298.15 K)=–(1850.97±1.92) kJ mol^–1, from the enthalpies of dissolution and other auxiliary thermodynamic data through a Hess thermochemical cycle. Furthermore, the reliability of the Hess thermochemical cycle was verified by comparing UV/Vis spectra and the refractive indexes of solution A (from dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] mixture in 2 mol dm^–3 hydrochloric acid) and solution A’ (from dissolution of the complex Zn(Val)SO₄·H₂O(s) in 2 mol dm^–3 hydrochloric acid).     

Thermochemical Properties and Non-isothermal Decomposition Reaction Kinetics of N-Guanylurea Dinitramide （GUDN）

Introduction N-Guanylurea dinitramide (GUDN) is a new ener-getic oxidizer with higher energy and lower sensitivity. Its crystal density is 1.755 g·cm-3. The detonation velocity is about 8210 m·s-1. Its specific impulse and pressure exponent are 213.1 s and 0.73, respectively. It has the potential for possible use as an energy ingredient of propellants and explosives from the point of view of the above-mentioned high performance. Its preparation,1 properties2 and hygroscopocity2 have been …     

Non-isothermal Decomposition Kinetics, Specific Heat Capac-ity and Adiabatic Time-to-explosion of a High Energy Material: 4,6-Bis(5-amino-3-nitro-1,2,4-triazol-1-yl)-5-nitropyrimidine

The thermal behavior of 4,6‐bis‐(5‐amino‐3‐nitro‐1,2,4‐triazol‐1‐yl)‐5‐nitropyrimidine (BANTNP) was studied under a non‐isothermal condition by DSC, PDSC and TG/DTG methods. The kinetic parameters (E_a and A) of the exothermic decomposition reaction are 304.52 kJ·mol^?1 and 10^24.47 s^?1 at 0.1 MPa, 272.52 kJ·mol^?1 and 10^21.76 s^?1 at 5.0 MPa, respectively. The kinetic equation at 0.1 MPa can be expressed as: dα/dT=10^25.3(1?α)^3/4exp(?3.8044×10⁴/T)/β The critical temperature of thermal explosion is 588.28 K. The specific heat capacity of BANTNP was determined with a Micro‐DSC method, and the standard molar specific heat capacity is 397.54 J·mol^?1·K^?1 at 298.15 K. The adiabatic time‐to‐explosion of BANTNP was calculated to be 11.75 s.     

手性纳米磷酸锌钠的热化学研究

Chirai sodium zincophosphate nanocrystalline has been prepared and characterized. The standard molar enthaipy of the following reaction 12Na3PO4·12H2O（s）＋ 12ZnSO4·7H2O（s）= Na12（Zn12P12O48）·12H2O（s）＋ 12Na2SO4（s）＋216H2O（1） was determined by solution reaction calorimetric at 298.15 K, and calculated to be 33.666±0.195 kl/mol. From the results and other auxiliary quantities, the standard enthalpy of formation for sodium zincophosphate nanocrystalline was derived to be △fHm^⊙ [Na12（Zn12P12O48）·12H2O（s）, 298.15 K] =- 24268.494 ± 0.815 kJ/mol.     

Thermochemistry on dodecylamine hydrochloride and <Emphasis Type="Italic">bis</Emphasis>-dodecylammonium tetrachlorozincate

Dodecylamine hydrochloride C₁₂H₂₅NH₃·Cl(s) and bis-dodecylammonium tetrachlorozincate (C₁₂H₂₅NH₃)₂ZnCl₄(s) were synthesized by the method of liquid phase reaction. The constant-volume energy of combustion of dodecylamine hydrochloride was measured by means of a RBC-II precision rotating-bomb combustion calorimeter at T = (298.15 ± 0.001) K. The standard molar enthalpy of formation of C₁₂H₂₅NH₃·Cl(s) was calculated to be \Updelta_f H_m^o \Updelta_{\rm{f}} H_{\rm{m}}^{\rm{o}} (C₁₂H₂₅NH₃·Cl, s) = −(706.79 ± 3.97) kJ mol⁻¹ from the constant-volume energy of combustion. In accordance with Hess’ law, a reasonable thermochemical cycle was designed and the enthalpy change of the synthesis reaction of the complex (C₁₂H₂₅NH₃)₂ZnCl₄(s) was determined by use of an isoperibol solution-reaction calorimeter. The standard molar enthalpy of formation of (C₁₂H₂₅NH₃)₂ZnCl₄(s) was calculated as \Updelta_f H_m^o \Updelta_{\rm{f}} H_{\rm{m}}^{\rm{o}} [(C₁₂H₂₅NH₃)₂ZnCl₄, s] = −(1862.14 ± 7.95) kJ mol⁻¹ from the standard molar enthalpy of formation of C₁₂H₂₅NH₃·Cl(s) and other auxiliary thermodynamic data.     

Ab initio study on the mechanism of reaction HNCO+NH2

Ab initio UMP2 and UQCISD(T) calculations, with 6-311G** basis sets, were performed for the titled reactions. The results show that the reactions have two product channels: NH₂+ HNCO?NH₃+NCO (1) and NH₂+HNCO?N₂H₃+CO (2), where reaction (1) is a hydrogen abstraction reaction via an H-bonded complex (HBC), lowering the energy by 32.48 kJ/mol relative to reactants. The calculated QCISD(T)//MP2(full) energy barrier is 29.04 kJ/mol, which is in excellent accordance with the experimental value of 29.09 kJ/mol. In the range of reaction temperature 2300–2700 K, transition theory rate constant for reaction (1) is 1.68×10¹¹–3.29×10¹¹ mL·mol^-1·s^-1, which is close to the experimental one of 5.0×10¹¹mL·mol^-1·s^-1or less. However, reaction (2) is a stepwise reaction proceeding via two orientation modes,cis andtrans, and the energy barriers for the rate-control step at our best calculations are 92.79 kJ/mol (forcis-mode) and 147.43 kJ/mol (fortrans-mode), respectively, which is much higher than reaction (1). So reaction (1) is the main channel for the titled reaction.     

ArticleMicrocalorimetric Investigation on the Kinetics of the Oxidation of Ascorbic Acid with Hydrogen Peroxide

Introduction Ascorbic acid is still attractive due to its wide-rang-ing role in biological processes and chemical fields. Consequently the knowledge of the kinetics of ascorbate reduction is highly desirable. In previous papers,1-11 spectroscopy and electronics methods were generally used to study the oxidation of ascorbic acid, and only a first-order reaction rate constant was obtained by these methods. Since the reaction is a complicated process involving several reactive species, the previo…     

苏糖酸钾的低温热溶及标准摩尔生成焓测定

以苏糖酸与碳酸氢钾反应制得苏糖酸钾K(C₄H₇O₅)·H₂O，通过红外光谱、热重、化学分析及元素分析等对其进行了表征。用精密自动绝热热量计测量了该化合物在78K-395K温区的摩尔热容。实验结果表明，该化合物存在明显的脱水转变，其脱水浓度、摩尔脱水焓以及摩尔脱水熵分别为：(380.524 ± 0.093) K，(19.655 ± 0.012) kJ/mol 和 (51.618 ± 0.051) J/（K·mol）。将78K-362K和382K-395K两个温区的实验热容值用最小二乘法拟合，得到了两个表示热容随温度变化的多项式方程。以RBC-II型恒容转动弹热量计测定目标化合物的恒容燃烧能为(-1749.71 ± 0.91) kJ/mol，计算得到其标准摩尔生成焓为(-1292.56 ± 1.06) kJ/mol。     

Absolute rate constants for the addition of hydroxymethyl radicals to alkenes in methanol solution

Absolute rate constants and their temperature dependencies were determined for the addition of hydroxymethyl radicals (CH₂OH) to 20 mono- or 1,1-disubstituted alkenes (CH₂ = CXY) in methanol by time-resolved electron spin resonance spectroscopy. With the alkene substituents the rate constants at 298 K (k₂₉₈) vary from 180 M^?1s^?1 (ethyl vinylether) to 2.1 middot; 10⁶ M^?1s^?1 (acrolein). The frequency factors obey log A/M^?1s^?1 = 8.1 ± 0.1, whereas the activation energies (E_a) range from 11.6 kJ/mol (methacrylonitrile) to 35.7 kJ/mol (ethyl vinylether). As shown by good correlations with the alkene electron affinities (EA), log k₂₉₈/M^?1s^?1 = 5.57 + 1.53 · EA/eV (R² = 0.820) and E_a = 15.86 ? 7.38 · EA/eV (R² = 0.773), hydroxymethyl is a nucleophilic radical, and its addition rates are strongly influenced by polar effects. No apparent correlation was found between E_a or log k₂₉₈ with the overall reaction enthalpy. © 1995 John Wiley & Sons, Inc.     

Thermochemistry of the ternary solid complex Gd(C5H8NS2)3(C12H8N2)

The novel ternary solid complex Gd(C₅H₈NS₂)₃(C₁₂H₈N₂) has been obtained from the reaction of hydrous gadolinium chloride, ammonium pyrrolidinedithiocarbamate (APDC), and 1,10-phenanthroline (o-phen · H₂O) in absolute ethanol. The complex was described by an elemental analysis, TG-DTG, and an IR spectrum. The enthalpy change of the complex formation reaction from a solution of the reagents, Δ_r H _m ^ϑ (sol), and the molar heat capacity of the complex, c _m , were determined as being − 15.174 ± 0.053 kJ/mol and 72.377 ± 0.636 J/(mol K) at 298.15 K by using an RD496-III heat conduction microcalorimeter. The enthalpy change of a complex formation from the reaction of the reagents in a solid phase, Δ_r H _m ^ϑ (s), was calculated as being 52.703 ± 0.304 kJ/mol on the basis of an appropriate thermochemical cycle and other auxiliary thermodynamic data. The thermodynamics of the formation reaction of the complex was investigated by the reaction in solution. Fundamental parameters, the activation enthalpy (ΔH _≠ ^ϑ ), the activation entropy (ΔS _≠ ^ϑ ), the activation free energy (ΔG _≠ ^ϑ ), the apparent reaction rate constant (k), the apparent activation energy (E), the preexponential constant (A), and the reaction order (n), were obtained by the combination of the thermochemical data of the reaction and kinetic equations, with the data of thermokinetic experiments. The constant-volume combustion energy of the complex, Δ_c U, was determined as being −17588.79 ± 8.62 kJ/mol by an RBC-II type rotatingbomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_c H _m ^ϑ , and standard enthalpy of formation, Δ_f H _m ^ϑ , were calculated to be −17604.28 ± 8.62 and −282.43 ± 9.58 kJ/mol, respectively. The text was submitted by the authors in English.     

Preparation and Study of Thermal Decomposition Mechanism of Zn(Thr)(AcO)_2·2H_2O

Introduction -Amino acids as additive have a wide application in medicines, foodstuff and cosmetics.1-3 The synthetic methods of amino acid have been reviewed.4,5 The solu-bility property of Zn(AcO)2-Thr-H2O (Thr=Threonine) system at 298.15 K has been investigated by the semimicro-phase equilibrium method, in which the phase region of the complex did not exist.6 The prepara-tion of Zn(Thr)SO4H2O was reported in Ref. 7∶3 times volume of acetone relative to that of water was added into t…     

Kinetics and mechanism of the reduction of monochloramine by hydroxylamine and hydroxylammonium ion

The kinetics and mechanism by which monochloramine is reduced by hydroxylamine in aqueous solution over the pH range of 5–8 are reported. The reaction proceeds via two different mechanisms depending upon whether the hydroxylamine is protonated or unprotonated. When the hydroxylamine is protonated, the reaction stoichiometry is 1:1. The reaction stoichiometry becomes 3:1 (hydroxylamine:monochloramine) when the hydroxylamine is unprotonated. The principle products under both conditions are Cl^–, NH⁺₄, and N₂O. The rate law is given by ?[d[NH₂Cl]/dt] = k₊[NH₃OH⁺][NH₂Cl] + k₀[NH₂OH][NH₂Cl]. At an ionic strength of 1.2 M, at 25°C, and under pseudo‐first‐order conditions, k₊= (1.03 ± 0.06) ×10³ L · mol^?1 · s^?1 and k₀=91 ± 15 L · mol^?1 · s^?1. Isotopic studies demonstrate that both nitrogen atoms in the N₂O come from the NH₂OH/NH₃OH⁺. Activation parameters for the reaction determined at pH 5.1 and 8.0 at an ionic strength of 1.2 M were found to be ΔH? = 36 ± 3 kJ · mol^–1 and Δ S? = ?66 ± 9 J · K^?1 · mol^?1, and Δ H? = 12 ± 2 kJ · mol^?1 and Δ S? = ?168 ± 6 J · K^?1 · mol^?1, respectively, and confirm that the transition states are significantly different for the two reaction pathways. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 124–135, 2006     

Thermodynamics of Silicon Nitride. Standard molar enthalpy of formation of amorphous Si3N4 at 298.15 K

The standard molar enthalpy of formation Δ_f H _m ⁰=–760±12 kJ for amorphous silicon nitride a-Si₃N₄ has been determined from fluorine combustion calorimetry measurements of the massic energy of the reaction: a-Si₃N₄(s)+6F₂(g)=3SiF₄(g)+2N₂(g). This value combined with Δ_f H _m ⁰= –828.9±3.4 kJ for a-Si₃N₄ indicates that determined for the first time molar enthalpy change for the transition from amorphous to α-crystalline form Δ_trs H _m ⁰=69±13 kJ is very evident, in spite of its large uncertainty range resulting from impurity corrections. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermochemical study on ternary complex of dysprosium <Emphasis Type="Italic">m</Emphasis>-nitrobenzoic acid with <Emphasis Type="Italic">o</Emphasis>-phenanthroline

A ternary binuclear complex of dysprosium chloride hexahydrate with m-nitrobenzoic acid and 1,10-phenanthroline, [Dy(m-NBA)₃phen]₂·4H₂O (m-NBA: m-nitrobenzoate; phen: 1,10-phenanthroline) was synthesized. The dissolution enthalpies of [2phen·H₂O(s)], [6m-HNBA(s)], [2DyCl₃·6H₂O(s)], and [Dy(m-NBA)₃phen]₂·4H₂O(s) in the calorimetric solvent (V_DMSO:V_MeOH = 3:2) were determined by the solution–reaction isoperibol calorimeter at 298.15 K to be \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2phen·H₂O(s), 298.15 K] = 21.7367 ± 0.3150 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [6m-HNBA(s), 298.15 K] = 15.3635 ± 0.2235 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2DyCl₃·6H₂O(s), 298.15 K] = −203.5331 ± 0.2200 kJ·mol⁻¹, and \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = 53.5965 ± 0.2367 kJ·mol⁻¹, respectively. The enthalpy change of the reaction was determined to be \Updelta_\textr H_\textm^q = 3 6 9. 4 9 ±0. 5 6   \textkJ·\textmol ^{- 1} . \Updelta_{\text{r}} H_{\text{m}}^{\theta } = 3 6 9. 4 9 \pm 0. 5 6 \;{\text{kJ}}\cdot {\text{mol}}^{ - 1} . According to the above results and the relevant data in the literature, through Hess’ law, the standard molar enthalpy of formation of [Dy(m-NBA)₃phen]₂·4H₂O(s) was estimated to be \Updelta_\textf H_\textm^q \Updelta_{\text{f}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = −5525 ± 6 kJ·mol⁻¹.     

Crystal Structure, Phase Transition, and Thermodynamic Properties of Bis-dodecylammonium Tetrachlorozincate (C12H25NH3)2ZnCl4(s)

The crystal structure and composition of (C₁₂H₂₅NH₃)₂ZnCl₄(s) were characterized by chemical and elemental analysis, X‐ray powder diffraction technique and X‐ray crystallography. The lattice energy of the title compound was calculated to be U_POT=888.82 kJ·mol^?1. Low temperature heat capacities of the title compound have been measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 403 K. An obvious solid to solid phase transition occurred in the heat capacity curve, and the peak temperature, molar enthalpy and molar entropy of the phase transition of the compound were determined to be T_trs= (364.02±0.03) K, (_trsH_m= (77.567±0.341) kJ·mol^?1, and (_trsS_m= (213.77±1.17) J·K^?1·mol^?1, respectively. Experimental molar heat capacities before and after the phase transition were respectively fitted to two polynomial equations. The smoothed molar heat capacities and fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were calculated and tabulated at an interval of 5 K.     

4-硝基苯甲醇的低温热容和标准摩尔生成焓

用精密自动绝热量热计测定了4-硝基苯甲醇（4-NBA）在78 ~ 396 K温区的摩尔热容。其熔化温度、摩尔熔化焓及摩尔熔化熵分别为:(336.426 ± 0.088) K, (20.97 ± 0.13) kJ×mol-1 和 (57.24 ± 0.36) J×K-1×mol-1.根据热力学函数关系式,从热容值计算出了该物质在80 ~ 400 K温区的热力学函数值 [HT - H298.15 K] 和[ST - S298.15 K]. 用精密氧弹燃烧量热计测定了该物质在T＝298.15 K的恒容燃烧能和标准摩尔燃烧焓分别为 (C7H7NO3, s)＝- ( 3549.11 ± 1.47 ) kJ×mol-1 和 (C7H7NO3, s)＝- ( 3548.49 ± 1.47 ) kJ×mol-1. 利用标准摩尔燃烧焓和其他辅助热力学数据通过盖斯热化学循环, 计算出了该物质标准摩尔生成焓 (C7H7NO3, s)＝- (206.49 ± 2.52) kJ×mol-1 .