反向胶束法制备聚3,4-乙烯二氧噻吩纳米粒子的光电性能和热稳定性

采用聚合和掺杂同时进行的反向胶束体系制备了粒径分散较小的聚3,4-乙烯二氧噻吩(PEDOT)纳米粒子, 利用紫外-可见光光谱(UV-Vis)、X射线衍射(XRD)和扫描电子显微镜(SEM)等分析方法对纳米粒子进行了表征. 实验结果发现, 氧化剂用量、超声处理、聚合温度及掺杂程度对PEDOT纳米粒子的形貌、电性能及热稳定性有不同程度的影响. 根据实验结果对反向胶束法制备PEDOT纳米粒子过程进行优化发现, 在PEDOT纳米粒子聚合过程中, 甲基苯磺酸有效掺杂浓度约为0.17 mol/L时, PEDOT链的取向最规则, 在6.7°, 12.7°, 25°出现衍射峰, 掺杂剂的有效掺杂使得纳米粒子中分子链的取向不同, 并可以获得较高的电导率(>100 S/cm)的PEDOT纳米粒子, 当粒子的尺寸小于20 nm后电导率降低; 热失重法(TG)分析结果表明, PEDOT纳米粒子的热稳定性比普通块材好, 掺杂剂浓度对纳米粒子的热稳定性有一定影响.     

主链型液晶聚芳酯酰胺的合成、结构与性能研究进展

主链型液晶聚合物(main-chain liquid crystalline polymers,MCLCPs)分子链易取向的特性赋予其优异的性能,在航空、电子等领域具有不可替代的地位。其中芳香族聚酯酰胺(aromatic polyesteramides,APEAs)作为重要的一类,解决了单一化学结构的聚芳酯须在较高温度下加工、聚芳酰胺分子间氢键带来的刚性过大、易吸水等问题,具有可观的应用前景。目前相关研究中的分子链结构与聚合方法繁多,但缺少系统性的梳理。本文按照酯键与酰胺键的生成次序,将APEAs的合成分为同时生成、易生成无规链结构的一步缩聚法与先后分别制备、可得到有规序列的两步缩聚法。另外,不同结构单体的反应特性决定了适用的聚合方法与条件不同,因此本文一并整理了其聚合反应的影响因素。在此基础上,梳理了主链结构与性能的关系,展望未来的发展方向,以期为新型APEAs的合成提供借鉴与参考。     

Investigation of fast pitch angle scattering of runaway electrons in the EAST tokamak

This paper reports that an experimental investigation of fast pitch angle scattering(FPAS) of runaway electrons in the EAST tokamak has been performed.From the newly developed infrared detector(HgCdTe) diagnostic system,the infrared synchrotron radiation emitted by relativistic electrons can be obtained as a function of time.The FPAS is analysed by means of the infrared detector diagnostic system and the other correlative diagnostic systems(including electron-cyclotron emission,hard x-ray,neutrons).It is found that the intensity of infrared synchrotron radiation and the electron-cyclotron emission signal increase rapidly at the time of FPAS because of the fast increase of pitch angle and the perpendicular velocity of the energetic runaway electrons.The Parail and Pogutse instability is a possible mechanism for the FPAS.     

Scheme for preparation of multi-partite entanglement of atomic ensembles

We show a scheme of preparing multipartite W type of maximally entangled states among many atomic ensembles with the generation time increasing with the party number only polynomially. The scheme is based on laser manipulation of atomic ensembles and single-photon detection, and fits well the status of the current experimental technology. We also show one of the applications of this kind of W state, demonstrating Bell theorem without inequalities.     

Re_3W的点接触安德烈夫反射谱研究

本文通过对不同晶体结构Re_3W样品的点接触测量和对比研究,证实具有中心对称结构和非中心对称结构的Re_3W都是弱耦合Bardeen-Cooper-Schrieffer超导体,同时发现在两个相表面都可以形成很理想的点接触结,即电子通过界面时受到的非弹性散射很弱.将Re_3W样品置于大气环境近六个月后重新进行测量,仍然能够得到类似的结果,表明Re_3W具有很好的稳定性. Re_3W的这种优良特性,不仅可通过点接触实验得到的参数推算出Re_3W两个相的费米速度,而且提供了一种简单的方法,可以在点接触实验中利用Re_3W来印证针尖材料的费米速度和测量其自旋极化率等.作为尝试,本文用Re_3W/Ni点接触结测量了铁磁性金属Ni的自旋极化率,得到了与前人报道一致的结果.     

Photoluminescence properties of Ca_4La_6(SiO_4)_4(PO_4)_2O_2-based phosphors for wLEDs

The apatite compound Ca_4La_6(SiO_4)_4(PO_4)_2O_2(CLSPO) was explored as the host material for phosphors used in white light-emitting diodes(w LEDs). The crystal structure of the CLSPO host prepared by the solid-state reaction method was investigated with Rietveld refinement. The rare earth ions(Eu~(3+)/Tb~(3+)/Ce~(3+), Tb~(3+)/Tb~(3+), Mn~(2+))activated CLSPO phosphors were synthesized, and their photoluminescence properties, quantum yields, as well as thermal stabilities, were studied. Under near-ultraviolet excitations, the Eu~(3+) and Tb~(3+) -doped CLSPO compounds exhibited red and green emissions with high luminescence efficiencies. Besides, tunable emissions from green to orange were obtained by introducing Mn~(2+) ions into the Tb~(3+) -doped CLSPO samples. The results showed that the phosphors studied may have potential applications for w LEDs.     

Phenomenology of b→cτ■ decays in a scalar leptoquark model

During the past few years,signs of lepton flavor universality(LFU)violation have been observed in b→cτ■ and b→sl+l-transitions.Recently,the D* and τ polarization fractions P_L~D* and P_L~τ in B→D*τ■decay were likewise measured by the Belle collaboration.Motivated by these intriguing results,we revisit the RD(*)and RK(*) anomalies in a scalar leptoquark(LQ)model,where two scalar LQs,one of which is a S U(2)L singlet and the other a S U(2)L triplet,are introduced simultaneously.We consider five b→ cτ■ mediated decays,B→D(*)τ■,B_c→ηcτ■,Bc→J/ψt■,and ∧_b→∧_cτ■,and focus on the LQ effects on the q~2 distributions of the branching fractions,LFU ratios,and various angular observables in these decays.Under the combined constraints of the available data on RD(*),RJ/ψ,P_L~τ(D*),and pLD*,we perform scans for the LQ couplings and make predictions for a number of observables.Numerically it is found that both the differential branching fractions and LFU ratios are largely enhanced by the LQ effects,with the latter expected to provide testable signatures at the SuperKEKB and High-Luminosity LHC experiments.     

非制冷红外焦平面无效像元识别与实时补偿

非制冷红外焦平面阵列(UFPA)不可避免地存在无效像元, 这对UFPA的成像效果造成了极坏的影响。为解决这一问题, 在分析并总结各种非制冷红外焦平面无效像元识别算法优缺点的基础上, 提出一种新的无效像元识别与实时补偿方法。根据像元响应特性, 采用循环迭代法以搜索最优的无效像元判别阈值, 并据此标识出无效像元的位置。在硬件实现阶段, 对于M×N的UFPA器件, 在任意采样时刻, 利用移位寄存器保存当前采样点之前的M个响应值, 使其输出可实时更新为与采样点同列的上一个数据; 同时, 利用一般的寄存器实时保存与采样点同行的前一个数据, 采用同帧行列间内插法实现无效像元的实时补偿。该算法有效地解决了无效像元识别阈值选取困难及不易实时补偿的问题。针对320×240的UFPA器件, 该算法在基于FPGA的红外图像处理系统上得以实时实现, 成功地消除了无效像元对UFPA成像效果的影响。     

Double-rod metasurface for mid-infrared polarization conversion

Resonant responses of metasurface enable effective control over the polarization properties of lights. In this paper,we demonstrate a double-rod metasurface for broadband polarization conversion in the mid-infrared region. The metasurface consists of a metallic double-rod array separated from a reflecting ground plane by a film of zinc selenide. By superimposing three localized resonances, cross polarization conversion is achieved over a bandwidth of 16.9 THz around the central frequency at 34.6 THz with conversion efficiency exceeding 70%. The polarization conversion performance is in qualitative agreement with simulation. The surface current distributions and electric field profiles of the resonant modes are discussed to analyze the underlying physical mechanism. Our demonstrated broadband polarization conversion has potential applications in the area of mid-infrared spectroscopy, communication, and sensing.